Everyday Low Price: $8.99
Gold Club Price: What's This? $8.09
J&P Part: 130-053
This product was proudly made in the USA
This product works fine. Just not easy to snap together But I'm getting used to it now.
Extremely hard to use when adjusted correctly.
Makes strapping the helmet much faster. Only complaint is that it is possible to only latch it in half way. Feels like it is fully engaged, really make sure you get a good feel for it and make sure it is fully seated.
Very nice, metal not plastic, easy to install.
Must have item for any helmet. Quick on and off, and installs in less than a minute.
YO EVERYBODY!!! JUST LOOSEN YOUR HELMET STRAPS AND SLIDE YOUR NOGGEN OUT THE BACK OF HELMET. I HAVE A 7 3/4 SIZED MELON AND DO IT THAT WAY.
Waste of money. I can buckle my helmet on faster the regular way than trying to line these up to buckle up. Junk! I order two and my girlfriend hate them too!
Easy for me but woman has trouble operating.
Easier than messing with the straps when gloves are on but definitely takes some practice and getting used to as it is difficult to line up at first.
a real necessity.
Easy to put on, easy to use. I have one on all my helmets
It does the job but is not a rugged type of buckle. Better than strap and loops. Cant complain for the price
Easy to use.
Easy to install and works great!
It's not a bad piece of gear. Makes undoing the helmet a lot faster than using the D rings. Installation was easy, but latching /unlatching is a bit stiff and cumbersome. However, I do recommend this and will buy it again!
this is a must have item
makes handling much more easily
Off when you want and no fumbling around. Should have purchased a long time ago!!
they are super, so easy!!
can be hard to buckle
Works as advertised. Strong and trustworthy.
good product but the clasp is a little small and can be tough to close correctly, especially with cold hands. I would buy this product again.
Good product. Worked as it was supposed to
Pretty cool little set up. And really easy to instal.
Difficult to line up and latch with gloves on. I'd really like to find an after market latch like Nolan uses on their modular helmets. The Nolan latch is easy to operate with gloves on, but isn't transferable to other helmets.
I have bought several and I love them! Quick easy way to make it simple to remove you helmet and not have to adjust every time!
Its okay, not as nice as another I bought at a show.
Good price good product
fast to remove the helmet
For me it worked well but the release "squeeze" was too hard. (It needs to be though is case of an accident) so for me this did not work but on some one with younger hands or a man I would say yes.
Kept item for future use.
Easy to install. It is easy to buckle once you get the feel for it.
Makes it so much easier to remove my helmet and put it on. Easy to install.
I didn't like them. Too hard to get used to. Although my wife says she likes hers.
good qality... too hard to un-latch
Disapointed with the plastic and little pieces of metal.
easy to order, received parts quickly.
These seem more durable than the plastic model. I do prefer the metal buckles
DON LANG Posted:
I THINK IT'S STRONGER THAN THE PLASTIC ONE, BUT HARDER TO UNLATCH
Easy to set up and install!! Nice and easy now to take off and put on helmet. Glad you offered it!!
Bulkier than I thought it was going to be. Might be OK on my full face helmet.
awesome quality. heavy duty. I have one on all three helmets
This is a great invention. Easy to install and easy to click open and snap closed.
you can buckle up with gloves on.
Have used these on multiple helmets. Work perfect.
works like a charm
very satisfied with quality, cost and prompt delivery of item. Thank You !
I've used others and had to replace them. The old one on my other helmet has been there for several years.
Love the quick release. It makes helmet use much easier and being DOT and SNELL approved gives me confidence in it.
a little pricey for what you get, but i guess it will serve the purpose.
Great product, several reviewers posted that they had to remove the existing snap, YOU DO NOT have to do this on all helmets.
Works but has to be connected just right or it doesnt like coming back off
Ditched it after a week - couldn't get it to latch consistantly.
Works great and easy to hook and unhook.Good quality.
Neat Helmet buckle! Works Great!
Took only a few minutes to install, works great. Not having to deal with those D-Rings is priceless.
Makes the helment Qwick to put on & off. No D-Ring to mess with.
work fine no comments
The snap is ok, but everytime I try to snap it for her (she is paralyzed in her right arm) I feel like I'm going to pinch her neck in it.
not bad, the original snapped easier till it snapped in half.
works great for cruising around much easier to fasten than the normal helmet fasteners.
Doesn't work very well. My wife and I both had trouble getting it to unclasp. I figured out that I had to push it in a bit for it to engage, and then I could release it. It wasn't really worth the money.
Very hard to latch and unlatch.
Looks good but I have not used it yet. It seems to have good reviews from others that is why I purchased it.
Easy to install, works well.
Really please with this buckle system. I wasnt sure what to expect bc of the mostly good reviews but a few poor ones. It was a little tricky to install at first but in the end it only took a few minutes. Overall it works great, easy to use with gloves. After trying it out I ordered 2 more for my other helmet & wifes helmet.
nice product, I have them on all of my helmets
I Recommend this to eliminate struggling to get the factory helment strap on or off!
work great! No problems for me to use.
Rick St.V Posted:
this is an excellent buckle. it is easy to install and work effortlessly
Seems well made, but once it's attached to your helmet it looks to be hard, if not impossible, to remove - so make sure it goes on the helmet you're going to keep it on. The knurled surfaces that you press to separate the buckles are kind of hard to feel by hand and impossible to feel through gloves - if I would suggest an improvement it would be to increase the surface area of these or do something so that they're easier to locate/feel once the helmet is on your head and buckled.
Steve Sharp Posted:
Works well. Good quality. I have used these on several helmets.
(appears satisfactory, haven't had a chancee to test)
Works as intended.
easy install, too easy for clip to slid off non buckle side, but does it's job as long as you keep an eye on that while taking the helmet on and off.
It is hard to line up to snap.Sometimes it takes a couple of minutes.The other quick snap plastic 1 is better cause it has av shape to align quickly.
This item works well, as advertised. I recommend purchase.
great product. as stated.
it's a cheap product! it was hard to use. i couldn't get it to unsnap when wearing the helmet. i throw it in the trash the same day i received it
Better than the plastic quick release.
I dont know how I made it this long without these buckles. It saves time getting in and out of helmet.
The buckles are easy as sin to attach to the lid. However, fastening under the chin is a bit of a pain in the butt. You have to have it "JUST SO" in order to get the 2 halves to lock together. Unfastening is a breeze.
Anything to make the helmet easier to put on and take off I LIKE IT!
Anything to make the helmet easier to put on take off.
Easy installation, but not easy to snap together nor is it really all that quick when trying to release it.
works great easy to install
Makes getting the lid off much easier. Worth every penny.
Great product, it worked out exactly how it was described in the product description. Getting one for the wife I like it so much.
Requires Adobe Flash Player