Goodridge Sniper Straight 7/16″ ID Banjo
- Product Reviews
- Catalog Pages
Goodridge Sniper Straight 7/16″ ID Banjo• Build your own Sniper range is the latest addition to our popular Hide-A-Line product range• Featuring stainless steel fittings and PVC coated -2 microbore stainless braided hoses, Sniper products are easily assembled without any special tools and are perfect for routing through concealed areas• Cut sniper hose to correct length using cable cutters or a similar tool that will make a clean, straight cut• Slightly flare the inner PTFE lining of the sniper hose using a mandrel or similar tool to insure the lining is circular and will accept the tapered tail of the sniper fitting• Before sliding the collar onto the sniper hose, insert the tapered end of the sniper fitting into the sniper hose and rotate 3-4 turns into the hose to form a thread• Rotate the sniper fitting anti-clockwise 3-4 turns and remove and strip back 11mm of the outer PVC coating of the sniper hose• Slide the sniper collar over the exposed sniper hose, insuring the exposed sniper hose is fully seated into the sniper collar• Fit the sniper fitting into the installed sniper collar, tightening each sniper fitting until proper clocking has been accomplished• Do not loosen sniper fittings once the larger secondary thread is engaged with the sniper collar or hose will need to be trimmed by 1/4″ and Asterisk 3-7 repeated• The distance from the shoulder of the sniper collar to the base of the installed sniper fitting should be 1-2mm
|Banjo Bolt Size:||7/16 - 24 for 12mm||Coating:||PVC|
|DOT Approved:||No||Manufacturer Part Number:||GD5092-02-04C|
|Material:||Stainless Steel||Sold in Units:||Each|
This product has not yet been reviewed. Be First To Write A Review
Goodridge Sniper Straight 7/16″ ID Banjo?
Our customer service has the answer.