Due to vendor restrictions this product does not qualify for this offer.
Manufacturer Part Number: SB-SSLPR
Material: Stainless Steel
Sold in Units: Kit
|Softail Heritage Classic EFI FLSTCI : 2001–2006|
|Softail Heritage Classic FLSTC : 1997–2011|
|Softail Heritage FLST : 2006, 2009|
|Touring Electra Glide Classic EFI FLHTCI : 1997–2006|
|Touring Electra Glide Classic FLHTC : 1997–2005, 2007–2008, 2011|
|Touring Electra Glide Police EFI FLHPEI : 2006|
|Touring Electra Glide Police EFI FLHTPI : 2005–2006|
|Touring Electra Glide Standard EFI FLHTI : 2003–2006|
|Touring Electra Glide Standard FLHT : 1997–2008|
|Touring Electra Glide Ultra Classic CVO FLHTCUSE6 : 2011|
|Touring Electra Glide Ultra Classic EFI FLHTCUI : 1997–2006|
|Touring Electra Glide Ultra Classic FLHTCU : 1997–1998, 2005, 2007–2008, 2011|
|Touring Road Glide Custom FLTRX : 2011|
|Touring Road Glide EFI FLTRI : 1998–2006|
|Touring Road Glide FLTR : 1998–2001, 2007–2008|
|Touring Road Glide Ultra CVO FLTRUSE : 2011|
|Touring Road Glide Ultra FLTRU : 2011|
|Touring Road King Classic EFI FLHRCI : 1998–2006|
|Touring Road King Classic FLHRC : 2007–2008, 2011|
|Touring Road King EFI FLHRI : 1997–2006|
|Touring Road King FLHR : 1997–2005, 2008, 2011|
|Touring Road King Police CA EFI FLHPEI : 2005|
|Touring Road King Police EFI FLHPI : 2005–2006|
|Touring Street Glide CVO FLHXSE2 : 2011|
|Touring Street Glide EFI FLHXI : 2006|
|Touring Street Glide FLHX : 2006–2008, 2011|
|Touring Ultra Limited FLHTK : 2011|
|Trike Street Glide FLHXXX : 2011|
The only reason it gets a star is because is because I appreciate the manufacturer's effort. It may also be that my '03 RK has the narrower fender. However, I could not get anything to line up properly. I ended scratching the fender. I recommend masking the fender first.
With some modification it fit my 2010 Ultra Limited.
Although not listed as compatible for my bike (2014 Softail Deluxe, the manufacturer has a specific model which requires a specific tail light housing) , it fits. The spacing of the bolts is the same as other Harleys. Had to bend it a little bit to fit. It´s easier to install with the fender removed. I highly recommend using some EVA foam (glued with double sided tape) on the back of the mount to avoid vibration damage or even body paint scratching. International customers: Keep in mind that this item is designed for US license plates (and its specific bolt pattern), so for use on my Brazilian plate I would have had to drill extra holes on the bracket. Or, you can use industrial grade double-sided tape (like I did) to attach the plate.
Very nice product and J and P cycles is the only place o could find this item to work for by Harley! Thanks
Exactly what I needed to relocate the license plate bracket on my Ultra Classic. Installation was easy and J&P got the part to me extremely fast!
little trouble with the mounting but nice addition to the bike
Wouldn't fit right on my 08 RK Classic. I had to bend the bracket so it would lay down. in the end I had to file the holes to make them large enough to line up the bolts. Not much metal left in the holes, and I am sure it will break off some day. Piece of garbage!
it does what it is supposed to. easy to fit with very basic tools and know how
Difficult to install and didn't fit right. I wasn't going to start filing away my fender to make it work. Tried opening up the mounting holes but not enough material left for a proper fit. Upper part tucks under stock light bar, if LEO can't see the whole tag its a guaranteed ticket in my area. Scrapped the part.
Difficult to install without taking apart the rear fender supports and fender tip. Didn't fit, try to open up the holes for the bolts and still didn't fit with stock light bar. Scrapped the part and went back to original config.
I love the LICENSE PLATE RE-LOCATOR. I subtracted one star because of the difficulty in installing. I had to file some of the tail light mounting hole to get it back in becasue of the angle of the re-locator. Otherwise it it perfect!!
Item was as described. Fit very well,just what I needed to relocate plate. Shipping, as usual, was very fast. THANKS
Finally! I was so glad to see this. I was in the process of trying to make my own with little success. It was somewhat easy to install, just a little tedious getting the bolts to thread back in. But less than a 30 minute job.
It is exactly what I was looking for.
I like the look !
Used this bracket after I put the detachable tour pak kit on my '11 FLTRU. Perfect fit behind my stock turn signal bar.
Nice item I think the mounting holes in plate need to adjustable I had mill the holes a little to fit the stock turn signal holes but other than that perfect item and great service
Email A Friend
Select Your Motorcycle