J&P Cycles® License Plate Light Kit
- Product Reviews
- Catalog Pages
J&P Cycles® License Plate Light Kit• This ultra bright kit lets you light up your license plate when it is not mounted with your taillight• Low profile blue LED lights are encased in a slotted chrome head, securely attached to the end of a hollow bolt• Just mount them in place of your regular license plate bolts• They come with enough wire to splice into any wiring harness• The slot in the chrome housing directs light down onto your license plate• Includes special hollow torx head wrench for tamper-resistant mounting• Emits a blue light
|Bulb Type:||LED||Bulb/LED Color:||Clear|
|Finish:||Chrome||Lighting Lens Color:||Clear|
|Product Color:||Clear||Sold in Units:||Pair|
TaylorJC Posted :
Pretty light construction...takecare not to snap the light mounts when installing and you should be happy with the results.
rishabehave Posted :
Looks great! Easy install don't tighten too tight. Use locktight Blue. Light is bright blue makes the bike have custom look. Time will tell on durability. Good price. I bought a back up set just in case.... good instpock position
zski Posted :
complete and well made works well and bright enough toilluminate the plate
fatcatz56 Posted :
Nice look. Good quality.
odin81 Posted :
donnbigdog Posted :
Good product as always.
billkinser Posted :
doktorbumbum Posted :
davidcox Posted :
These break very easily. I installed 4 of these and rode 1 block when one snaped off. They light only comes in blue and 4 of them were not bright enough to light the entire plate. At $10 a piece there are better products out there. Pass on these.
SavRob Posted :
These LED lights work great, easy install and the finished product is very clean. Just note that the light emitted is very blue, an attention getter.
Splinterman Posted :
This is the 3rd set of these I have bought for use as lighted license plate lights. The first set had broken lights in them, which J&P replaced with a new set. The second set I had on the bike for only a few months and one stopped working and the other light washed out to a white color. I reported this to J&P's quality department. I purchased this set as replacements to the replacements and I do like the look of the lights, when they work. Be careful not to tighten them too tight on the license plate or you will pull the LED light out of the housing, as it is only pressed in and WILL separate. I suggest using some blue loctite on the threads and only nominal snugness on the nuts.
jerrig Posted :
thanks J&P,great little product,much brighter than expected for LEDs.really lights up the plate on my custom mc.thinking about purchasing additional lights for accent lighting.love the lite blue color,it goes with my theme.would recomend using lok-tite when installing on vibration areas.would highly recomend,it worked for me.thanks again J&P for carrying another quality product.
r8y120 Posted :
I just purchased this product, using it on my side mount license plate. Very simple to install,a no brainer. For a small light(s), it's very bright. I would recommend it to anyone. "Great Product"
pandreasen Posted :
Great bright bllue light. Excellent construction and plenty of wire. Very pleased. BTW be advised that in Kalifornia the plate HAS to be illuminated by bright WHITE light. I have these shining of the chrome sides of the plate holder (which has red LEDs all around) for a Red, White and Blue look. Only feedback from cops so far is "looks good!"
zman69 Posted :
I have had two pairs of these on my old rigid bobber and they have both broke after about a month of riding with them. They are a great idea and work well when they are working. They just don't handle vibration very well.
jacksquat Posted :
Really lights up the plate and nice color of blue as well. Installation was very simple.
radeb98 Posted :
works & looks great and well made.
SUZROD Posted :
Very cool, blue light looks awesome.
amcline99 Posted :
Awsome lights, look great, work great, just wish they came in different colors for other applications and cheaper...
markgendein Posted :
LOVE the blue hue over the back of the bike. I used it with the "Chrome Radius License Plate Mount". There aren't any through holes in that mount so it took some fabrication, but it did work and it was a good solution to lighting that mount.
cory113 Posted :
Lights up great. Could use stronger hardware.
kecurl Posted :
Very bright blue lights. Just be careful not to tighten the nut past a "snug" fit or it will break. Had to return the first one because of this.
hbates1 Posted :
These are quite bright, very well made and installed easily. I think the threaded stem is overly long and there's no easy way to shorten them given that there's wiring running through them, but that's just personal preference. I guess it's better too long than too short. Very good alternative way of lighting up your license plate bracket...
Vasolini Posted :
These lights are great for cleaning up the back fender. They are easy to install and very bright LEDs. They allowed me to get rid of the big OEM plate light and have a more custom look. The only down side is that they are blue, which is illegal in Florida. But, I don't ride much at night, and when I do, the law hasn't said anything.
meinc Posted :
Great product and great service from the people at J&P Cycles. Tried the company that I purchased the license plate holder from and they were no help at all. You guys are fantastic. Again, all my thanks.
gregorysfd Posted :
The tag bolt lights work great. The two lights cover the tag with light for night driving.
micksmith Posted :
This is good feature to add to your license plate, to give a cool look at night. Thanks for all your great products that I added to my Softail to give it a custom look.
gregorysfd Posted :
The lights work very well and made a great addition to my motorcycle. Thank you for the great service.
J&P Cycles® License Plate Light Kit?
Our customer service has the answer.