Due to vendor restrictions this product does not qualify for this offer.
Everyday Low Price: $66.99
Gold Club Price: What's This? $60.29
J&P Part: 3400591
Gold Club free ground shipping
Fitment Note: For custom applications
Looks great and was so simple to install.
Tidies up the arse end of my mate's Heritage
I love the looks and it was easy to mount. I would recommend downloading the wiring instructions off the website before you start. The wiring is a little confusing because they are all black and red wires but they were not hot and ground. Made a huge difference in the way my bike looks now I love it.
Good looking piece. Was delivered exactly as promised, on time. Will definitely continue shopping here,
This assembly rocks and looks great on the bike, really cleans up the back end. Lots of complements.
I luuvvvv the classic classyy tombstone. Light...classyy.clean,nastolgic..
I really like the tombstone taillight assy. it looks very nice on my bike a lot better than the big bulky one I had. I did have to drill a couple holes for it but it was worth it.
Looke great on custom fxr. Really bright . Just what it needed
Looks good, but I had a difficult time wiring it to my existing wiring on my motorcycle. It also leaks and I've had to replace the bulbs after just a few months.
I love the way this looks on my bike. I installed it on my 2006 Sporster 1200C, and it looks so much better than the factory lights. I had bought it because it's cheaper than the rear directional lights relocation kit. Installation required me to drill two holes in the fender for the mounting screws, and I had to used the running light wires for the turn signals as grounding wires. The lights are very bright.
Works great, Loctite the screws or they will come loose.
Nice all in one light, Good looks and functionality. Super fast shipping from JP Cycles
LOVE THIS ... LOOKS GREAT ON MY BIKE.. I HAD TO CUT THE FENDER A LITTLE BUT IT COVERED AND LOOKS FANTASTIC..
I love the look of this part.
It looks great on my motorcycle. We aren't experts at electric, so it was a little tricky with the wiring, but we got it figured out.
Exactly what I expected, shipping was confusing but all in all not a bad experience
Could not be happier with this taillight. Fit my 00 Sporty perfectly, found the wiring easy to complete and the lights are nice and bright. What a compliment to the look of the bike, so much better than the stock taillight. My only regret is not purchasing this light at the same time as the bike! Thanks JP for another quality product!!
Holy old school ass
Like the Fitment description said, it wasn't a perfect fit to my '07 Dyna, it took a little enginuity to get it on, and the wiring was a hassly, but mostly due to Harley's wiring schematic. All in all I would recomend this product and have recommended J&P Cycles to friends.
a well constructed item fit perfect on my fathers 84 shovelhead and looks great..
Very nice , the stems on th we blinkers could stand to be a bit longer.
i have an 03 softtail. I had to run ground wires from the turn signal buckets to the ground of the wiring harness to get the signal to operate properly. there is an extra hole in each rubber grommet to do this. light works and looks good
Don't like how small it is. Doesn't fit my '03 Fatboy as nicely as I would like. Seems to be well built though.
Love the way the tombstone taillight looks on out bike. Can't wait to order the headlight
fairly easy install. I had to modify it a little. Looks great. easy to wire.
bulbs that came with it burnt out quickly, but great assembly and great deal
The light looks really good! However, the signal lights that come on it don't ground very well. I simply wired in another set and it fit, looks and works great!
Wow! Looks fantastic! Had some wiring issues at first, but tech support pointed me to the wiring diagram PDF. I had to drill a mounting hole in the lower part of the fender, and I was able to disassemble the main wire connector (6 place) and seal everything up. Installed it on my '99 Road King Classic. Almost the perfect housing curvature, leaves about a 1/64" gap in the middle of the curve... No worries. Thanks, J&P, another reason I buy from you!
Great addition for the 71 sportster i am re-building... Allowed me to add turn signals to it!
As always, the best
The product was high quality.
The tail light itself is a great product however the fact that it dosn't come with a wiring diagram really bothers me. I know we all can wire anything and are the best at everything however an electrical product isn't complete without a wiring diagram.
good part at good price fast shipping,
Good and bright, Turn signals are easily seen, nice compact design. Perfect solution to not wanting to drill holes for seperate turn signals. Looks good on the bike. Thanks
High quality item, mounted to fender as an aftermarket light yet still looks like OEM
Awesome light! great quality! For the price you wont find one as nice!
A great taillight. Very bright.
was a first class part with quality
I have a 2003 Indian Scout and it didn't mate correctly with the wiring harness, after a little exploration I was able to make it work. Overall the product was well constructed and looks great installed.
The tail light is great. Doesn't fit the fender of my V star 1100 perfect but it looks great. The quality of the product is good quality. The light shines bright and is very visible. I would recommend this for light to other V star 1100 riders looking customize their bikes.
Good quality for the money, does the job, a blacked out version may be a good idea
Taillight is very well made and looks great. The only problem was that it did not fit over the old Tombstone Taillights raised fender bracket. I had to cut the bracket out and drill new holes. Luckily the Light came with a solid rubber back gasket that sealed this large hole from debris. No instructions so wiring was tricky to a factory light. Common sense won and I am very happy with the finished product.
Good quality It is smaller than a stock tomb stone
good quality, too small
I really like the look on my bike.
Ordered and received the assembly in reasonable time. The first issue was there were no instructions of any form with the tail light. With a few minutes of testing and guessing, I had a pretty good idea of what hooked where. I had to drill a single hole to mount the light on a 2002 Yamaha VStar 1100 Classic. Overall, I am very pleased with the light. The build quality seems very good and the light it puts out is bright and can be seen at distance. I would recommend this product to anyone looking to change out the factory light on any cruiser. Ride Safe. DrZ
The quality of the product is excellent. Beautiful finish. Excellent materials. Design and Function however are poor. Running/Brake lamp is very dim compared to running/turn lamps. I don't recommend wiring turn signals as running lamps because, A. They overpower the brake lamp and B. when wired as running lamps they make turn signals almost unrecognizable(as reported to me by other bikers). I just ordered a lighted license plate frame in hopes that it will help address the poor brake lamp issue.
I've being ordering from J&P Cycles for a number of years now and never had any problems whatsoever. You guys have excellent service and staff. I would continue to be a customer for years to come. Keep up the good work!