Vance & Hines FuelPak - Fuel Management System

If your motorcycle is not listed below, please click the 'Select A Motorcycle' button above so we can find the right part.

 MIKED28210 Posted :
I couldn't believe how easy this FuelPak was to use. It took maybe ten minutes to install and program. Just followed the instructions and it worked great.

 hayshaker Posted :
Very nice product. I have ordered a lot and always am satisfied with the products. Will continue to order from J&P Cycles. Thank you.

 kramsoftail Posted :
I recently bought and installed the Vance&Hines Fuel Pack. The instructions were good. I did have to contact them on the code. My particular set up was not in the book of codes. I really don't see a great increase in performance. Gas mileage has improved though. It took about 45 min. to install.

 malberts Posted :
I installed the V&H Fuelpak along with their Big Shots (long style) and a Kuryaykn High Five air cleaner on my '06 Softail Deluxe. Sounds good, runs good, easy to do by yourself. No computer or tech needed. I'm not saying it's the way to go for everbody, I'm just saying that it works. I'm happy.

 jb1128 Posted :
Installation was easy. Putting in the codes even easier. My bike doesn't miss a beat. Great product for the do it yourself person.

 bcosburn Posted :
this product exceeded my expectations for ease of installation. It took an hour from removal of the seat to up and running. Everyting fit correctly and the instructions were clear. I am 100% happy with the perfomance I am getting on my 2007 Heritage Softail modified only with pipes and high flow air cleaner.

 royboy2 Posted :
Straight forward installation, easy setup, excellent throttle response.

 horserider01 Posted :
in 11/06 i bought a 07softtail deluxe i been looking at buying the samson bolony exhaust for my bike,would i be able to use v&h fuel pack,with this exhaust.

 rustymckay Posted :
Good product, easy to install, even easier to program, very happy with this product

 crbowser Posted :
IT worked go for up to thirty miles. Than bike ran rich. know I have to go to dealer to get it fixed. I did call V&H to get the right codes to down load.

 david.w.gentry@navy.mil Posted :
Easy to install and easy set up. took less than 30 min. to do the whole thing and it sure beats paying $600 plus for a dyno custom map.

 67v35er Posted :
Very nice system with clear instructions and easy install on my Fatboy.

 Max45acp Posted :
I like it - installed in less then an hour good instructions to follow nice increase in performance

 KPG5008 Posted :
Easy to use? Setup was simple. So far, it's good. Would buy again.

 Adrianb Posted :
awesome bike runs great could not be happier

 julianoocosta Posted :
good performance

 iceman260 Posted :
very easy to hook up 30 minutes up and running. great performance.

 omaha97 Posted :
What a easy kit to understand and install and setup.With the mods I did to my Deluxe true duals/no baffels,fishtails,Bigsucker stage II,And this V&H Fuel Pack made the bike a real Hot Rod.Runs cooler,Decent MPG's.Easy to understand dirctions.But online support is great!!!!!!.Will buy another one for sure.

 Softail0656 Posted :
Real simple install. Runs a little rich with stock air filter. Will change next week. Could instantly feel the increase in power. Excellent system for the money, easy to program

 profhistoire Posted :
Very easy to install. I did not have a setting number for the air cleaner and mufflers installed on my bike. So I sent an email to customer service to V & H and the answer came quickly (1 day later) with the correct setting number. My Deluxe roars pleasantly and perfectly! I highly recommend this fuel management system.

 bowhunter1989 Posted :
this will allow me the ability to make adjustments easily

 markweber Posted :
Great customer service; order arrived promptly, was exactly what I ordered and was well packed to prevent damage

 Oden7987 Posted :
Works well easy to understand instuctions,but had dealer install because bike is still under warranty,will come in handy when installing additional parts can program myself!

 swahoo Posted :
Simple straight forward instructions...easy install. Runs fine!

 arenlynn Posted :
good service

 tazitis Posted :
Still trying to dial in my bike. Worth the money but not as quick to install as made to believe

 wdshep Posted :
product as advertised easy to install. service excellent as usual with fast shipping.

 jpedersen0429 Posted :
Installed easy. Customer service from V&H was responsive when I asked about different maps. The map they recommending isnt perfect but honing in on it.

 LB_deluxe Posted :
Very happy with it easy install !

 stevo.006 Posted :
A must-have for anyone switching to V&H pipes. Easy to set up, but I’ve always had some popping on deceleration that I can’t quite get rid of.

 ccollier Posted :
Easy install, great support from V&H.

 djennis20 Posted :
Awesome. Big difference in power.

 rogerstratton Posted :
The Vance & Hines Fuel-Pak came with excellent instructions and was very easy to install. Also the calibration instructions were easy to follow and a breeze to complete. I am extremely happy with the unit and also the increased performance I have gotten from my '04 Electra Glide Ultra Classic.

 jerrymge Posted :
This is GREAT hookup and programs in 5 mim. A little trouble mounting the pack on the spider bracket. Mounting screws are too long. Used washers as spacers.

 Joerger Posted :
Simple installation and worked perfectly with my bike. The settings supplied increased my horsepower across the entire RPM range. Highly recommend this product.

 kttn99 Posted :
This was very easy to install. I have noticed improved performance. My economy went down a little, but that is probobly due to twisting my throttle more now..... I went from about 42 MPH to 41 MPH.... The one thing that I am discovering is that it appears in order to reap the full benifits of the performance package.... Pipes, Air Cleaner, and Fuel Pak.... I would still need to get the Stock CPU upgraded to Stage I. Which means more money out of my pocket. It is very simple to program this unit, find your bike and configuration in the back of the booklet and then program those numbers into the Fuelpak

 sboeder Posted :
Why spend the money for installation when you can do it yourself! The product worked well with the Vance & Hinds Oval slipon's. Performance increase on the low end was great. I am defintely happy with the purchase of the oval slip on's and fuelpak.

 smp352jp Posted :
WAS EASY TO INSTALL AND WORKS JUST FINE

 davidhickok Posted :
WOW

 flhxhdrider Posted :
Since installing the FuelPak I have been able to tell the difference in throttle response and it is much better at slower speeds in town. Temps are running about 10-13 degrees cooler. One of the best investments I have made to date. Unbelieveable difference. Would recommend it to anyone.

 mdc01101953 Posted :
easy to use no more popping

 ajb919 Posted :
Works Great! Easy to adjust.

 macdad53 Posted :
This unit is fantastic!! Works exactly as described. Nice neat installation took all of 30 mins. Programing instructions and program selection were a snap. Even had my SE mufflers listed by their HD part number for a precise program and the perofrmance is vastly improved. No off idle hesitiation when coll and excellent bump up in mid-range power. The first time I rolled it on wow!!

 duso1255 Posted :
Still trying to get the bugs out.

 madhatter5132 Posted :
Installed fuelpak on my 07 Road King with V & H intake, true duels and twin slash rounds. All were pretty easy to install after reading directions supplied. I can feel the power increase and the package works great together. The sound is really throaty and I am running the crap out of my bike with joy. I am sure my milage will suffer but WHO CARES its a toy! Just do it!

 cycleservice2u@yahoo.com Posted :
Great Product

 htdog1 Posted :
Simple and easy !!! No more throttle lag!!

 xlh76 Posted :
Can't even start to tell you the difference in my bike. Quicker response in the throttle & less heat from the engine/exhaust. Took me less than 20 minutes to install & program. Again, should have done this much sooner.

 Troyputman Posted :
Re-tuning made easy.

 7902 Posted :
VERY EASY INSTALL

 jamesskiba Posted :
Good instructions and web site, the bike runs and sounds great.

 misterbigcgreen Posted :
For what I've read and seen happen with these fuelpaks I was not impressed. Because they piggy back off the bikes ECM they tend to not work as well and break. Just payin a little more to have Harley remap your stock system is the smartest thing to do. Plus they can actually tune the best setting for your bike because every bike isn't exactly the same.

 fred piper Posted :
easy installation and it seems to work well, have about 50 miles on it so far will monitor spark plugs and performance in different conditions.

 kyle.daugherty1 Posted :
Great product. I definitely felt and heard it running better. A must for anyone who upgrades their exhaust and air intake.

 co2dav Posted :
My 2007XLC runs cooler and takes off like a bat out of hell.

 jake50 Posted :
FUEL-PAK a must if you put on a set of good sounding pipes,,,installed on a 08 STC,,perfect fit,,easy to program,,and with the vance&hines pipes,and a performance forced air cleaner,,so much more on demand smooth power and all without paying Harley 300$,everytime you want to change something,,,

 jake50 Posted :
perfect combo with the vance&hines pipes,,,easy hook up,,,easy to program,makes my bike run and perform great,,

 wolf1321 Posted :
Straight forward and easy to install. Excellent throttle response, no flat spots etc.

 bigrod21b Posted :
a must have when changing pipes and air cleaners. Can be set up in 10 minutes.

 abcsofhealth Posted :
Easy to install, easy to program. It would be nice to have a feedback led indicating proper lean fuel range after setting parameter values.

 triste Posted :
Worked great with my 2007 Night Train. I had no problems with the install other than it's a tight fit. I did have to go to the web site to find the correct and updated values for my bike I recommend you use the updated values on the web site to adjust your settings for your particular bike. Also the bike ran cooler I live in El Paso Texas & it gets hot here.

 tlm47201 Posted :
Installation on a Sportster it tight. The cal is a fight to get tuned, lots of tech calls. Better if we know what the modes were for. Does run better.

 sheppard62 Posted :
pain in the but... it didnt fit under my seat like it was supposed to ??? but i have a mustang seat that came on the bike, i bought it used... had to relocate the ecm to make it work... and the guys in ca. for tech support were no help at all... told me to go online and watch the vidio...

 FBL2010 Posted :
The V&H Fuelpak was a breeze to install and setup. Instructions were straight forward and called tech support 1 time to make sure I had the correct settings. They responded quickly. Made 1 slight modifications to the seat bumper and everything else fit great. The bike has better acceleration and runs cooler even in the 3 digit temps we had lately.

 p00psicle Posted :
As people have said, this is a tight squeeze. I managed to jam it in where they instructed on my 09 Sportster though. The worst part was doing up the negative battery cable again. Between my new pipes and this fuelpak my mileage has improved by 50%! The controls are hidden behind 4 screws for some reason making it a chore to edit though.

 m.honeycutt008@yahoo.ca Posted :
Easy as advertised, bike seems to be running much better as of now. Will update if any issues arise.

 jesserobertsusn Posted :
really brings the bike to life. a MUST if you got pipes. took 10 mins to install and had the bike running sweet.

 bobmckinley305 Posted :
Significant power + when installed with V & H Short shots staggered.

 jake50 Posted :
This works and is simple to hook up,But you can't change anything,But please spend a little more money and just replace your ECM with a Thunder-Max,that way you can set everything and i mean everything the way you want,,,

 knighttrain08 Posted :
Fast and easy set up, bike runs great and am no longer worried about running lean. hardest part was arranging it to fit under the seat

 Ricky G Posted :
Easy to program. Installed easy, Works as stated, Would recommend.

 mleverne Posted :
Good product. Does exactly what it is supposed to do. Make sure to read all the instructions first, or you may have to work backwards a few times.

 CoreyBassard Posted :
I'm not sure how you could hate this product. Once I got it installed, tweeked the settings to get it to run perfect, my nighster runs like a dream. The one thing I would say is, it was kind of a challenge getting the thing set up above the battery box and my frame. Not sure if my cables/wires were set up different than others, but it took me a minute to get it to sit right.

 charleskmoore2 Posted :
The set up is simple and the results are outstanding!

 wbcalx Posted :
Very easy to program and install.

 HDULTRA1 Posted :
WORKS GREAT

 oceancaptain Posted :
I chose the V&H Fuelpak because I like to do my own work, and if for some reason I ever have to go back to stock I don't have to go back to a dyno to remap. This is on my 08 FLHX and it runs flawless.

 HDULTRA1 Posted :
WORKS GREAT RECOMMEND IT HIGHTLY

 jm_obrien Posted :
Very easy to install and setup. Haven't dyno tuned to verify but it seems very close to where it needs to be.

 choprdan Posted :
NOT Received

 gus3757 Posted :
great easy to use. way better than power commander

 Rturbineguy1965 Posted :
So easy to install, clear instructions, and Really notice the difference great product

 clasenptg Posted :
installed with ease on my 2009 road king classic. instuctions were simple enough. also installed v&h twin slash muffs and arlen ness big sucker filter kit to complete the stage 1 upgrade. bike runs great. much improved throttle response

 Leatherneckkool Posted :
was shorting out my bikes system. had to remove, not happy at all with this purchase

 bergie74 Posted :
It was easy to install and program and saved me a lot of money doing it myself.

 hntwrobin Posted :
Fuelpak works well, bike runs better stronger.

 talldude141 Posted :
Very easy to install.

 jeansy Posted :
I fitted a V&H pro pipe,V&H VO2 air kit,V&H throttle system. All came with easy to read instructions. I didnt need any special tools and done all the work myself. Once fitted i just went to the V&H internet site to get the settings to tune the fuelpak with all the new gear fitted to my 2010 street glide harley. The site also had a how to video on programing the fuelpak module. The bike runs like a dream!

 scmmings Posted :
Easy install, and so far working great!

 trevorkski Posted :
Works as advertised. Easy to install. Recommend for anyone who does not want the dealer to do it.

 racisch Posted :
Easy to program and bike runs great.

 buell45 Posted :
V/H again works well on my ultra and easy to install and to configure by getting on line withV/H

 fastrax34 Posted :
Instaled VO-2 air, power duals and monster ovals, so this was a must. Easy to program-check with V&H for the most current values before programing

 Gitcho Posted :
The hardest part of the installation was cutting off the left side mounting tang. Once that was removed, everything else was a breeze. The set-up was very easy. Just follow the instructions. If unsure of the map to use, go to the website listed. The bike runs great with the new mufflers and the fuel-pak installed.

 rgs61smith@yahoo.com Posted :
Got the fuel pak for my 09 road king. The instructions were very good for installing it. Got on their web site for my values and it was quick and simple. Fit right where it was supposed to and programmed easy. Vance and Hines and j and p what a good combo. Really impressed with the fast delivery.

 101 Posted :
Easy to install and program, but wish it had somthing better than velcro to secure it.

 orbarnard Posted :
Works great..

 raynman49 Posted :
Love the fuel pak easy to install and program.

Requires Adobe Flash Player