Vance & Hines FuelPak - Fuel Management System
- Product Reviews
- Catalog Pages
Vance & Hines FuelPak - Fuel Management System• Most effective, simple to use fuel management system on the market today• No computer or mechanic needed• Simple installation, just plug it in, enter your values and ride• Provides the perfect fuel mixture to increase power and improve throttle response
|Manufacturer Part Number:||61009||Open or Closed Loop:||Open|
|Sold in Units:||Each||With/Without 02 Sensor:||Without|
If your motorcycle is not listed below, please click the 'Select A Motorcycle' button above so we can find the right part.
- Touring Electra Glide Classic FLHTC : 2008–2010
- Touring Electra Glide Standard FLHT : 2008–2009
- Touring Electra Glide Ultra Classic CVO FLHTCUSE4 : 2009
- Touring Electra Glide Ultra Classic CVO FLHTCUSE5 : 2010
- Touring Electra Glide Ultra Classic Firefighter FLHTCU : 2010
- Touring Electra Glide Ultra Classic FLHTCU : 2008–2010
- Touring Electra Glide Ultra Classic Peace Officer FLHTCU : 2010
- Touring Electra Glide Ultra Classic Shrine FLHTCU : 2010
- Touring Electra Glide Ultra Classic Side Car FLHTCU : 2009
- Touring Road Glide Custom FLTRX : 2010
- Touring Road Glide CVO FLTRSE3 : 2009
- Touring Road Glide FLTR : 2008–2009
- Touring Road King Classic FLHRC : 2008–2010
- Touring Road King Firefighter FLHR : 2010
- Touring Road King FLHR : 2008–2010
- Touring Road King Peace Officer FLHR : 2010
- Touring Road King Shrine FLHR : 2009–2010
- Touring Street Glide CVO FLHXSE : 2010
- Touring Street Glide FLHX : 2008–2010
- Touring Street Glide Trike FLHXXX : 2010
- Touring Ultra Limited FLHTK : 2010
- Tri Glide Ultra Classic FLHTCUTG : 2010
Inspector857 Posted :
Installed in minutes as promised... If only I would have turned on the handlebar switch the first time I went to program it I could have avoided allot of needless trouble-shooting. DOH!!! Programming was a breeze with the V&H Big Shot Duels I also just installed.
jndyer Posted :
Easy install, and the FUELPAK website is simple to use to program the module, which takes about 5 minutes.
gijoeruckrat Posted :
Hated this product. I had nothing but problems with it from day one. I uploaded the recommended settings and had skips, sputters, and stalls. Talked to the tech at V&H, had the same problems. I ended up throwing it away and replacing it with a Cobra Fi2000 like I have on my Softail, and have had zero issues since. IMHO, don't buy this product.
stevus_maximus Posted :
Works perfect with my V&H V02 intake, V&H 2-1 Propipe and my 2012 H-D Street Glide
rlwilli Posted :
mhoech Posted :
Great deal compared to having things dialed in at the dealer. I called the help line before starting. Told they guy what I was upgrading (pipes and intake) and he told me where to find the proper codes. He said if there is any hesitation, he told me to make 3 changes. I followed his instructions and it all worked well. Some hesitation on take off so I made the recommended changes and problem solved. Really an easy install.
Richnan Posted :
easy install and bike is running great.
apowell Posted :
Installed today. V&H got back to me very quickly for my map via email.
bigben_96319 Posted :
excellent plug n play system
hollisfarms Posted :
If you can not install this you don't need to own a bike. This was to easy and the instructions were very clear. Programing simple and complete. Thanks you J&P and V&H for a quality product!
Dahudda Posted :
firstname.lastname@example.org Posted :
Very fast and accurate item
email@example.com Posted :
Easy to install, works great and great support staff.
CADietrich12 Posted :
Easy install and perfect fit. It took me two attempts to get the correct map for my V&H Big Radius/VO2 Drac pairing from the V&H website. I emailed them for tech-assist, but never heard a response. I know that some systems use a direct USB connection to download the Map. This would be much easier and faster than manually inputing the codes for the entire Map. Other than that, I'm very happy with the purchase.
James_schopper Posted :
plug and play. Bike runs like a Kenyan
firstname.lastname@example.org Posted :
Very easy to program. One improvement would be to make the electrical connection narrower so the ECM will attach in its original position.
north ferry choppers Posted :
dannyhartranft Posted :
Seems to work great.
email@example.com Posted :
I couldn't believe how bad my bike ran before I installed the fuel pack. Money well spent
Bennett7894 Posted :
second bike using this, works awsome. easy!
opd404 Posted :
So far so good . Easy to install .
bogorman Posted :
Was easier than I expected and programmed quick.
greghlm Posted :
dickbone Posted :
No more dead spots
zeigyxoxoxo Posted :
what can i say about this product? plug it in, program some values into the fuel pak and your ready to rock. simple install very nice product.works great
mattpion01 Posted :
V&H Fuelpak is simple and easy to use and install!
wmassey9 Posted :
So far, great
mikeo37 Posted :
awesome,easy to install and setup after you tell V & H what pipes and intake your using.
nospmohtd Posted :
A must with an air intake and exhaust. Easy set up and your ready to ride.
bhaley1059 Posted :
Works great easy install and programming good tech support
orbwhntr Posted :
great product, simple to install and program
pesawyer Posted :
Excellent! Worked like a charm, easy to install and set up.
firstname.lastname@example.org Posted :
great product. easy to use
benhardy Posted :
Easy to install, and works great.
airborne4vr Posted :
Easy to install and program. Any problems and Customer Service is just a call away and they're very professional.
mikeopfl Posted :
Easy installation and saved hundreds on not having to have Harley program and dyno. Runs great!
dsberry89 Posted :
2012 street glide. bought this fuel pack so my D&D exhaust and air intake would work on my bike. works great and can notice a difference in power
ShaBoh Posted :
Installation was a snap. After putting in the appropriate values I have noticed a big difference in the performance of my bike. Couldn't be happier with this product.
msg31u Posted :
easy to install and program
dessig69 Posted :
Easy install and the owners manual made it easy to program for my bike.
email@example.com Posted :
Vary easy to install.
sb27610 Posted :
works great but unable to get the ecu back into its spot new plug makes unit too wide. FLHRC
aquanutscuba Posted :
This was as easy as it is advertised. I do very little wrenching on my bike since I'm not the mechanical type and I completed both this install and a Stage 1 kit in less than 1 hour. Bike runs great and saved me a lot of cash.
pshirlock Posted :
Vance&Hines has great video on install. Justed follow the steps on map I obtained from techs and man what a difference
firstname.lastname@example.org Posted :
This kit was very easy to understand and install. The unit was pre-configured and just had to be slipped in under my seat. The total install took about 30 minutes including the O2 Sensor add-on. Bike seems to be running great.
masjeepman Posted :
Extremely easy to install and program. Performance is outstanding. I would recommend to anyone.
rex82nd Posted :
works great! if you cant install and program this, kill yourself. it really is that easy to install.
wazzman Posted :
Seems to be good. Did have to re adjust once after talking to Vance and Hines. Awesome customer service....issue quickly resolved
bjwolfe Posted :
I think the v and h fuel paks are the easiest product to adjust your air and fuel
67sprint Posted :
Very quick and simple installation.
gnonanc Posted :
Painless install, e-mailed V&H ahead of install and told them what I equipment I was installing and they e-mailed a map to me with a direct number if I had any questions.
Craigb7202 Posted :
krall3800 Posted :
easy install works great
MIKED28210 Posted :
I couldn't believe how easy this FuelPak was to use. It took maybe ten minutes to install and program. Just followed the instructions and it worked great.
hayshaker Posted :
Very nice product. I have ordered a lot and always am satisfied with the products. Will continue to order from J&P Cycles. Thank you.
kramsoftail Posted :
I recently bought and installed the Vance&Hines Fuel Pack. The instructions were good. I did have to contact them on the code. My particular set up was not in the book of codes. I really don't see a great increase in performance. Gas mileage has improved though. It took about 45 min. to install.
malberts Posted :
I installed the V&H Fuelpak along with their Big Shots (long style) and a Kuryaykn High Five air cleaner on my '06 Softail Deluxe. Sounds good, runs good, easy to do by yourself. No computer or tech needed. I'm not saying it's the way to go for everbody, I'm just saying that it works. I'm happy.
jb1128 Posted :
Installation was easy. Putting in the codes even easier. My bike doesn't miss a beat. Great product for the do it yourself person.
bcosburn Posted :
this product exceeded my expectations for ease of installation. It took an hour from removal of the seat to up and running. Everyting fit correctly and the instructions were clear. I am 100% happy with the perfomance I am getting on my 2007 Heritage Softail modified only with pipes and high flow air cleaner.
royboy2 Posted :
Straight forward installation, easy setup, excellent throttle response.
horserider01 Posted :
in 11/06 i bought a 07softtail deluxe i been looking at buying the samson bolony exhaust for my bike,would i be able to use v&h fuel pack,with this exhaust.
rustymckay Posted :
Good product, easy to install, even easier to program, very happy with this product
crbowser Posted :
IT worked go for up to thirty miles. Than bike ran rich. know I have to go to dealer to get it fixed. I did call V&H to get the right codes to down load.
email@example.com Posted :
Easy to install and easy set up. took less than 30 min. to do the whole thing and it sure beats paying $600 plus for a dyno custom map.
67v35er Posted :
Very nice system with clear instructions and easy install on my Fatboy.
Max45acp Posted :
I like it - installed in less then an hour good instructions to follow nice increase in performance
KPG5008 Posted :
Easy to use? Setup was simple. So far, it's good. Would buy again.
Adrianb Posted :
awesome bike runs great could not be happier
julianoocosta Posted :
iceman260 Posted :
very easy to hook up 30 minutes up and running. great performance.
omaha97 Posted :
What a easy kit to understand and install and setup.With the mods I did to my Deluxe true duals/no baffels,fishtails,Bigsucker stage II,And this V&H Fuel Pack made the bike a real Hot Rod.Runs cooler,Decent MPG's.Easy to understand dirctions.But online support is great!!!!!!.Will buy another one for sure.
Softail0656 Posted :
Real simple install. Runs a little rich with stock air filter. Will change next week. Could instantly feel the increase in power. Excellent system for the money, easy to program
profhistoire Posted :
Very easy to install. I did not have a setting number for the air cleaner and mufflers installed on my bike. So I sent an email to customer service to V & H and the answer came quickly (1 day later) with the correct setting number. My Deluxe roars pleasantly and perfectly! I highly recommend this fuel management system.
bowhunter1989 Posted :
this will allow me the ability to make adjustments easily
markweber Posted :
Great customer service; order arrived promptly, was exactly what I ordered and was well packed to prevent damage
Oden7987 Posted :
Works well easy to understand instuctions,but had dealer install because bike is still under warranty,will come in handy when installing additional parts can program myself!
swahoo Posted :
Simple straight forward instructions...easy install. Runs fine!
arenlynn Posted :
tazitis Posted :
Still trying to dial in my bike. Worth the money but not as quick to install as made to believe
wdshep Posted :
product as advertised easy to install. service excellent as usual with fast shipping.
jpedersen0429 Posted :
Installed easy. Customer service from V&H was responsive when I asked about different maps. The map they recommending isnt perfect but honing in on it.
LB_deluxe Posted :
Very happy with it easy install !
stevo.006 Posted :
A must-have for anyone switching to V&H pipes. Easy to set up, but I’ve always had some popping on deceleration that I can’t quite get rid of.
ccollier Posted :
Easy install, great support from V&H.
djennis20 Posted :
Awesome. Big difference in power.
ktmman Posted :
works as advertised, easy install and good performance with the VandH 2 into 1 exhaust system.
twotone2 Posted :
I have used these before without any issues except limited adaptability to expanded engine mods. Decided to return item and purchase auto tune thundermax.
red79762 Posted :
easy install and setup
rogerstratton Posted :
The Vance & Hines Fuel-Pak came with excellent instructions and was very easy to install. Also the calibration instructions were easy to follow and a breeze to complete. I am extremely happy with the unit and also the increased performance I have gotten from my '04 Electra Glide Ultra Classic.
jerrymge Posted :
This is GREAT hookup and programs in 5 mim. A little trouble mounting the pack on the spider bracket. Mounting screws are too long. Used washers as spacers.
Joerger Posted :
Simple installation and worked perfectly with my bike. The settings supplied increased my horsepower across the entire RPM range. Highly recommend this product.
kttn99 Posted :
This was very easy to install. I have noticed improved performance. My economy went down a little, but that is probobly due to twisting my throttle more now..... I went from about 42 MPH to 41 MPH.... The one thing that I am discovering is that it appears in order to reap the full benifits of the performance package.... Pipes, Air Cleaner, and Fuel Pak.... I would still need to get the Stock CPU upgraded to Stage I. Which means more money out of my pocket. It is very simple to program this unit, find your bike and configuration in the back of the booklet and then program those numbers into the Fuelpak
sboeder Posted :
Why spend the money for installation when you can do it yourself! The product worked well with the Vance & Hinds Oval slipon's. Performance increase on the low end was great. I am defintely happy with the purchase of the oval slip on's and fuelpak.
smp352jp Posted :
WAS EASY TO INSTALL AND WORKS JUST FINE
davidhickok Posted :
flhxhdrider Posted :
Since installing the FuelPak I have been able to tell the difference in throttle response and it is much better at slower speeds in town. Temps are running about 10-13 degrees cooler. One of the best investments I have made to date. Unbelieveable difference. Would recommend it to anyone.
mdc01101953 Posted :
easy to use no more popping
ajb919 Posted :
Works Great! Easy to adjust.
macdad53 Posted :
This unit is fantastic!! Works exactly as described. Nice neat installation took all of 30 mins. Programing instructions and program selection were a snap. Even had my SE mufflers listed by their HD part number for a precise program and the perofrmance is vastly improved. No off idle hesitiation when coll and excellent bump up in mid-range power. The first time I rolled it on wow!!
duso1255 Posted :
Still trying to get the bugs out.
madhatter5132 Posted :
Installed fuelpak on my 07 Road King with V & H intake, true duels and twin slash rounds. All were pretty easy to install after reading directions supplied. I can feel the power increase and the package works great together. The sound is really throaty and I am running the crap out of my bike with joy. I am sure my milage will suffer but WHO CARES its a toy! Just do it!
firstname.lastname@example.org Posted :
htdog1 Posted :
Simple and easy !!! No more throttle lag!!
xlh76 Posted :
Can't even start to tell you the difference in my bike. Quicker response in the throttle & less heat from the engine/exhaust. Took me less than 20 minutes to install & program. Again, should have done this much sooner.
Troyputman Posted :
Re-tuning made easy.
7902 Posted :
VERY EASY INSTALL
jamesskiba Posted :
Good instructions and web site, the bike runs and sounds great.
misterbigcgreen Posted :
For what I've read and seen happen with these fuelpaks I was not impressed. Because they piggy back off the bikes ECM they tend to not work as well and break. Just payin a little more to have Harley remap your stock system is the smartest thing to do. Plus they can actually tune the best setting for your bike because every bike isn't exactly the same.
fred piper Posted :
easy installation and it seems to work well, have about 50 miles on it so far will monitor spark plugs and performance in different conditions.
catfishjlh Posted :
So easy to install. Along with a new high flow intake filter, easy to program. Only took a little over an hour taking my time and double checking everything. Went for test ride, what a rush, throttle response is great, what a beast!!!!! A total different bike. Would recommend this to anybody!!!!!
ridethewind666 Posted :
like always ..........j&p cycles delivers and comes thru with the greatest products and helpful help from the great staff in tech support......products are always spot on and work great with what ever project i got goin on............thank you very much
email@example.com Posted :
There was no book of codes included in the package as described on the instruction sheet. Had to go online to find codes
56berg Posted :
Easy to install and set up.
alexrenfro Posted :
great product as usual
kyle.daugherty1 Posted :
Great product. I definitely felt and heard it running better. A must for anyone who upgrades their exhaust and air intake.
co2dav Posted :
My 2007XLC runs cooler and takes off like a bat out of hell.
jake50 Posted :
FUEL-PAK a must if you put on a set of good sounding pipes,,,installed on a 08 STC,,perfect fit,,easy to program,,and with the vance&hines pipes,and a performance forced air cleaner,,so much more on demand smooth power and all without paying Harley 300$,everytime you want to change something,,,
jake50 Posted :
perfect combo with the vance&hines pipes,,,easy hook up,,,easy to program,makes my bike run and perform great,,
wolf1321 Posted :
Straight forward and easy to install. Excellent throttle response, no flat spots etc.
bigrod21b Posted :
a must have when changing pipes and air cleaners. Can be set up in 10 minutes.
abcsofhealth Posted :
Easy to install, easy to program. It would be nice to have a feedback led indicating proper lean fuel range after setting parameter values.
triste Posted :
Worked great with my 2007 Night Train. I had no problems with the install other than it's a tight fit. I did have to go to the web site to find the correct and updated values for my bike I recommend you use the updated values on the web site to adjust your settings for your particular bike. Also the bike ran cooler I live in El Paso Texas & it gets hot here.
tlm47201 Posted :
Installation on a Sportster it tight. The cal is a fight to get tuned, lots of tech calls. Better if we know what the modes were for. Does run better.
sheppard62 Posted :
pain in the but... it didnt fit under my seat like it was supposed to ??? but i have a mustang seat that came on the bike, i bought it used... had to relocate the ecm to make it work... and the guys in ca. for tech support were no help at all... told me to go online and watch the vidio...
FBL2010 Posted :
The V&H Fuelpak was a breeze to install and setup. Instructions were straight forward and called tech support 1 time to make sure I had the correct settings. They responded quickly. Made 1 slight modifications to the seat bumper and everything else fit great. The bike has better acceleration and runs cooler even in the 3 digit temps we had lately.
p00psicle Posted :
As people have said, this is a tight squeeze. I managed to jam it in where they instructed on my 09 Sportster though. The worst part was doing up the negative battery cable again. Between my new pipes and this fuelpak my mileage has improved by 50%! The controls are hidden behind 4 screws for some reason making it a chore to edit though.
firstname.lastname@example.org Posted :
Easy as advertised, bike seems to be running much better as of now. Will update if any issues arise.
jesserobertsusn Posted :
really brings the bike to life. a MUST if you got pipes. took 10 mins to install and had the bike running sweet.
bobmckinley305 Posted :
Significant power + when installed with V & H Short shots staggered.
jake50 Posted :
This works and is simple to hook up,But you can't change anything,But please spend a little more money and just replace your ECM with a Thunder-Max,that way you can set everything and i mean everything the way you want,,,
knighttrain08 Posted :
Fast and easy set up, bike runs great and am no longer worried about running lean. hardest part was arranging it to fit under the seat
Ricky G Posted :
Easy to program. Installed easy, Works as stated, Would recommend.
mleverne Posted :
Good product. Does exactly what it is supposed to do. Make sure to read all the instructions first, or you may have to work backwards a few times.
CoreyBassard Posted :
I'm not sure how you could hate this product. Once I got it installed, tweeked the settings to get it to run perfect, my nighster runs like a dream. The one thing I would say is, it was kind of a challenge getting the thing set up above the battery box and my frame. Not sure if my cables/wires were set up different than others, but it took me a minute to get it to sit right.
vinny901 Posted :
works good was not hard to install
charleskmoore2 Posted :
The set up is simple and the results are outstanding!
wbcalx Posted :
Very easy to program and install.
HDULTRA1 Posted :
oceancaptain Posted :
I chose the V&H Fuelpak because I like to do my own work, and if for some reason I ever have to go back to stock I don't have to go back to a dyno to remap. This is on my 08 FLHX and it runs flawless.
HDULTRA1 Posted :
WORKS GREAT RECOMMEND IT HIGHTLY
jm_obrien Posted :
Very easy to install and setup. Haven't dyno tuned to verify but it seems very close to where it needs to be.
choprdan Posted :
gus3757 Posted :
great easy to use. way better than power commander
Rturbineguy1965 Posted :
So easy to install, clear instructions, and Really notice the difference great product
clasenptg Posted :
installed with ease on my 2009 road king classic. instuctions were simple enough. also installed v&h twin slash muffs and arlen ness big sucker filter kit to complete the stage 1 upgrade. bike runs great. much improved throttle response
Leatherneckkool Posted :
was shorting out my bikes system. had to remove, not happy at all with this purchase
bergie74 Posted :
It was easy to install and program and saved me a lot of money doing it myself.
hntwrobin Posted :
Fuelpak works well, bike runs better stronger.
talldude141 Posted :
Very easy to install.
jeansy Posted :
I fitted a V&H pro pipe,V&H VO2 air kit,V&H throttle system. All came with easy to read instructions. I didnt need any special tools and done all the work myself. Once fitted i just went to the V&H internet site to get the settings to tune the fuelpak with all the new gear fitted to my 2010 street glide harley. The site also had a how to video on programing the fuelpak module. The bike runs like a dream!
scmmings Posted :
Easy install, and so far working great!
trevorkski Posted :
Works as advertised. Easy to install. Recommend for anyone who does not want the dealer to do it.
racisch Posted :
Easy to program and bike runs great.
buell45 Posted :
V/H again works well on my ultra and easy to install and to configure by getting on line withV/H
fastrax34 Posted :
Instaled VO-2 air, power duals and monster ovals, so this was a must. Easy to program-check with V&H for the most current values before programing
Gitcho Posted :
The hardest part of the installation was cutting off the left side mounting tang. Once that was removed, everything else was a breeze. The set-up was very easy. Just follow the instructions. If unsure of the map to use, go to the website listed. The bike runs great with the new mufflers and the fuel-pak installed.
email@example.com Posted :
Got the fuel pak for my 09 road king. The instructions were very good for installing it. Got on their web site for my values and it was quick and simple. Fit right where it was supposed to and programmed easy. Vance and Hines and j and p what a good combo. Really impressed with the fast delivery.
101 Posted :
Easy to install and program, but wish it had somthing better than velcro to secure it.
orbarnard Posted :
raynman49 Posted :
Love the fuel pak easy to install and program.
Spinlersa Posted :
Quick easy install.
shosford83 Posted :
location of fuel pack very tight,problems may happen
Dr. Dale Posted :
Vanes and Hines produce the best products...
tom jacobs jr Posted :
with tech support was satisfied on installation and increased response of bike thxs.
kiethgardner Posted :
Good product very easy to install and use.
fatbob2012 Posted :
Installation and entering the code was simple. Quicker/smoother throttle responce, greater performance and a great addition to the Vance & Hines exhaust system I installed.
jayballs3 Posted :
Works great. Bike runs great with the new pipes and intake and the installation couldn't be easier.
jdakota163 Posted :
Installed in 5 minutes, programmed in 2 minutes.... Works flawlessly from the get go....
robdago Posted :
Quit working after 2 weeks (Junk)
firstname.lastname@example.org Posted :
I didn't notice much of a difference in acceleration or overall power, however, throttle response improved, the bike runs cooler and no more popping sound. That in itself made the purchase worth it!
majorleewild Posted :
Easy to install, down loaded map info from V&H, plugged it in and took a run... unreal increase in performance...love it.
stucooper Posted :
This is the best. Harley messed up my bike with their download and this fixed it right. The bike runs better than any Harley I have owned.
frenchwolfe Posted :
Easy installation and set-up. Works great.
Hammarlund Posted :
Great instructions, easy install. Very tight under the seat on the softail slim, but I got it in there. Bike runs super.
tayoakam Posted :
Easy yo install and setup I didn't have any problems like the few mentioned here. Runs great with the V&H Short Shot exhaust on my Wide Glide.
jktwnsnd Posted :
Works perfectly! Easy install! Took less than 30 minutes start to finish!
Msgoose1 Posted :
I am very impressed with this fuel injection system programmer. Saved me well over $600 in buying the Harley unit and having the bike dyno-ed. It took about an hour to install. The hardest part was fishing the control unit through the electrical box up under the seat. Once installed, about 20 minutes to program and it worked with no issues. The bike has a good deal more mid-range and the popping from the Vance and Hines slip-ons I had previously installed has gone away. Great item, well worth the money!
wmhastings Posted :
My 2012 fat bob with thunderheader & screaming eagle intake was re-mapped at dealer (phase 1) resulting in heavy decelleration popping. Problem solved with fuel pac installation!
cturner0208 Posted :
Great product for Stage 1 upgrade, you can really feel the difference once you install the FuelPak on the bike. Install is a snap, it took me 20 minutes max and then another 5 to program it.The customer support from V&H is great.
jburnside87 Posted :
Excellent product! Excellent price! Fast shipping! J&P cycles is the best online retail for aftermarket motorcycle accessories.
north ferry choppers Posted :
ozzyozbirn Posted :
Had a hard time even at the HD dealership to get the codes to make this work with my bike. so i gave it to a friend who could use it.
ladder51 Posted :
easy to install , works great !!
cgaines70 Posted :
fuel pak along with v&h vo2 airfilter and big radius pipes brought my bike alive gave it a good sound and and improved power drasticly
email@example.com Posted :
Easy instructions and easy to install. The bike runs and sounds great! Excellent product
Patkus1 Posted :
Works great. Fairly easy to install. Took the popping out of my Vance and Hines slip-ons
whitemikewalters Posted :
Really easy to set up and use. Must have for any stage 1 upgrade!
jtmendez1 Posted :
Super easy to use. Works great.
Boogerbiker Posted :
Awesome addition to V&H pipes at a great price!
Pjm327 Posted :
fuel pack did not work with this combination .Vance and Hines support not much help. Had to return it. Went with a power commander.
Yellow_snow Posted :
Simple, easy to use!
Yellow_snow Posted :
Simple, easy to use!
Yellow_snow Posted :
Simple, easy to use!
Speargun Posted :
Easy install. Simple instructions & works great!
firstname.lastname@example.org Posted :
Great product and easy to use. There's not much room on the Slim so I had to be creative to find a place for all the wires and the module.
email@example.com Posted :
Easy to program; wiring harness was a tight fit.
SlimeDog Posted :
fast shipping 2days and installed.
dwgmc1 Posted :
Very easy to install, I had to call vance Hines to modify my settings and they were very helpful. I would recommend this product
sbhump Posted :
great product, easy to install.works like a charm..
andrew.michaelpower Posted :
Incredibly easy to install and tune. So far the bike seems to be running great.
Roldaddy007 Posted :
Great customer service and product!!!
Cwed45@gmail.com Posted :
Made one heck of a difference! I added this..Vance and Hines short shots and Vance and Hines duke air cleaner, whole new bike A++
DonnieM Posted :
Great product with noticeable difference. Extremely easy to instal and program.
charliejp Posted :
Very easy to install fitting tight but good on my 2012 Harley SFX Blackline. Went and got the codes for it off V&H sight very easy to put in. Bike has just a little poping when slowing to a stop but runs fantastic.. Thanks
paulecarter Posted :
Awesome bit of kit, goes perfect with my V & H short shots and V & H air filter
HighWay101 Posted :
Excellent plug and go system, about 15 min. to install, then just go on v&h website and put in the values provided. You might get some pop on decel, I did not mind, plus if you contact v&h , They will tell you which values to re-adjust for your system.
streetbobber13 Posted :
Fuel kit is great!! Easy to install, no problems after 500+ miles
michaelblanebanks Posted :
Just Awesome!!! Easy to install. Easy to follow instructions. Would recommend to a friend.
tonyt10571 Posted :
dragonenz Posted :
i own a 2008 Sportster 883. This went on very easy took no time at all and works like a charm.
ericuknow Posted :
more information to fine tune would really help.
Mica1030 Posted :
A must have for new pipes and air cleaner.
galousis Posted :
outtrucking83 Posted :
HeberKid Posted :
as always..excellent products with good prices
oldguyriding Posted :
I've used a Fuel Pak on other bikes and it has always worked well. I can definitely recommend it.
71scott71 Posted :
So far pleased with the FuelPak. Pretty easy to program and work with.
Darren.cantu Posted :
Easy to install, great product.
firstname.lastname@example.org Posted :
Very easy to install. My Krome Kraft slip ons were not listed, but with 1 quick call to Vance & Hines, I was given the proper settings. My 2009 Dyna & I are very pleased.
Doug Sellars Posted :
A tight fit on my 2009 Fat Bob, but the results are well worth the effort. Added V&H Big Radius 2 into 2 and H.D. SE Heavy Breather and my bike has turned into a BEAST!!! Great products and great service from J&P Cycles!!!!!
pete623 Posted :
Awesome easy to fit and works well
ffron26 Posted :
had a little trouble with calibration, but tech from fuelpak was excellent help.
nlarmstrong81 Posted :
Easy to install works well on my 2009 Kawasaki Vulcan 900 classic. This is a must have for an exhaust upgrade.
juniorfan13 Posted :
The instructions are not very clear. A common sense though helps get the this installation.
archerdude_76 Posted :
Easy to install.
Vance & Hines FuelPak - Fuel Management System?
Our customer service has the answer.