Due to vendor restrictions this product does not qualify for this offer.
OEM Reference: 16207-79B
Sold in Units: Each
|Super Glide Custom FXRC : 1985|
|Super Glide Disc Glide FXRDG : 1984|
|Super Glide FXR : 1986–1994|
|Super Glide FXR2 : 1999|
|Super Glide FXR3 : 1999|
|Super Glide FXR4 : 2000|
|Super Glide Grand Touring FXRD : 1986|
|Super Glide II FXR : 1982–1985|
|Super Glide Low Rider Anniversary FXRS : 1988|
|Super Glide Low Rider Convertible FXRS-CONV : 1989–1993|
|Super Glide Low Rider FXRS : 1982–1991|
|Super Glide Low Rider Sport FXRS-SP : 1987–1993|
|Super Glide Police FXRP : 1984–1994|
|Super Glide Sport Glide FXRT : 1983–1992|
|Touring Electra Glide Classic Anniversary FLHTC : 1988|
|Touring Electra Glide Classic EFI FLHTCI : 1996–2006|
|Touring Electra Glide Classic FLHTC : 1983–2005, 2007–2008|
|Touring Electra Glide Police EFI FLHPEI : 2006|
|Touring Electra Glide Police EFI FLHTPI : 2005–2006|
|Touring Electra Glide Standard EFI FLHTI : 2003–2006|
|Touring Electra Glide Standard FLHT : 1983, 1986, 1995–2008|
|Touring Electra Glide Ultra Classic EFI FLHTCUI : 1995–2006|
|Touring Electra Glide Ultra Classic FLHTCU : 1989–1998, 2005, 2007–2008|
|Touring Road Glide EFI FLTRI : 1998–2006|
|Touring Road Glide FLTR : 1998–2001, 2007–2008|
|Touring Road King Classic EFI FLHRCI : 2000–2006|
|Touring Road King Classic FLHRC : 2007–2008|
|Touring Road King Custom EFI FLHRSI : 2004–2006|
|Touring Road King Custom FLHRS : 2004–2007|
|Touring Road King EFI FLHRI : 2000–2006|
|Touring Road King FLHR : 2000–2005, 2008|
|Touring Road King Police CA EFI FLHPEI : 2005|
|Touring Road King Police EFI FLHPI : 2005–2006|
|Touring Street Glide EFI FLHXI : 2006|
|Touring Street Glide FLHX : 2006–2008|
|Touring Tour Glide Classic Anniversary FLTC : 1988|
|Touring Tour Glide Classic FLTC : 1981–1992|
|Touring Tour Glide FLT : 1980–1983|
|Touring Tour Glide Ultra Classic EFI FLTCUI : 1996|
|Touring Tour Glide Ultra Classic FLTCU : 1989–1995|
Mount works perfect with correct installation. Read bad reviews about vibration. Install new mount, leave the 2 mount bolts loose, and the one through bolt loose, ride the bike around the block, tighten mount bolts, tighten through bolt to ONLY 30 ft. lbs. you should be able to turn the bolt head still with a wrench. if it still vibrates, loosen the through bolt, and re torque less tight.
doing its job well so far
The bike shakes like hell just off idle with this mount and doing a drive train alignment made no difference.
J P Cycles are the best , always fast delivery , and the parts always fit like oem !
worked good fits good easy to install
Good quality at a great price! Shipped quickly and arrived on time!
perfect match to the original
I did not use it. It fits my 2007 but was instructed to use the updated mount from HD.
Perfect fit and almost all vibration is gone. I didn't realize how bad my original mount had gotten until I put this new one in. As a welcome side effect, my fingers have stopped going numb while riding, must have been from the vibration from my old mount. Great price too, don't hesitate to pull the trigger on this mount.
I generally hate putting things made in a foreign country on my bike but being unemployed and on a very tight budget I had no other choice but this. Frankly I was surprised. It looks every bit as good a stock with no fitment issues and it did what it was supposed to. Now the engine doesn't vibrate like it did before and move around. I found what made the stock one fail is oil getting on it from oil changes and reacting with the rubber. I think I'll try something different from now on. For the price you can't go wrong. Don't hesitate to purchase especially if you are on a budget like me.
Fitted great, looks great
Always great service.
does the job.. a good price.... especially comparing to oem... used a couple of these now, never had an issue
It was a perfect oem fit
This mount is great for the price, if you compare with a regular dealer, thks J&P
Looked and fit just like the OEM. No issues with installing without a bunch of additional work. I noticed no increase in vibrations over the OEM. Good purchase. Great price. Great service.
great price and arrived quickly.
Just liked i ordered..
Perfect fit. No more vibration
easy install. hope it lasts as long as the oem
fit and worked fine
It works. Fits just like the OEM part.
Perfect fit! Easy to install and awesome vibration isolation. Highly recommended!
Best bang for the buck. Harleys new replacement mounts are a lot stiffer making more vibration. I haven't had this one on long, but will keep posted
Increased vibration dramatically, Cant recommend.
bought this because of excessive vibration at idle took care of vibration but now vibration is felt at low rpm in first gear will wait till i have a couple hundred miles on bike to see if vibration settles down
Product as described.
exact fit...smooth order...smooth ride !
INSTALLED ON MY "02" FLHTC. PICKED UP TERRIBLE VIBRATION FROM APPROX. 1200 RPMS UP. SNAPPED 2 FAIRING BRACKETS.
Fast delivery.Great product.
Looks good, fits right, but mount is very stiff. I get a huge amount of vibration between 1200 and 1800 rpm.
The product was an exact match for the original mount that came off of the bike. Workmanship was good and the bike runs alot better with a motormount that isn't broke, and at half the cost of a factory part, is well worth the waiting a couple of days for the part to come in.
yeah it works like it should
Email A Friend
Select Your Motorcycle