Due to vendor restrictions this product does not qualify for this offer.
This product was proudly made in the USA
Centerline Exhaust: 106.0°
Centerline Intake: 99.0°
Duration Exhaust @ .053: 252°
Duration Intake @ .053: 238°
Lift @ Top Dead Center Exhaust: .178″
Lift @ Top Dead Center Intake: .187″
Manufacturer Part Number: 33-5177
Sold in Units: Kit
|Dyna Low Rider Convertible FXDS-CONV : 1999–2000|
|Dyna Low Rider EFI FXDLI : 2005–2006|
|Dyna Low Rider FXDL : 1999–2005|
|Dyna Street Bob EFI FXDBI : 2006|
|Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006|
|Dyna Super Glide Custom EFI FXDCI : 2005–2006|
|Dyna Super Glide Custom FXDC : 2005|
|Dyna Super Glide EFI FXDI : 2005–2006|
|Dyna Super Glide FXD : 1999–2005|
|Dyna Super Glide Police FXDP : 2004|
|Dyna Super Glide Sport EFI FXDXI : 2005|
|Dyna Super Glide Sport FXDX : 1999–2005|
|Dyna Super Glide T-Sport FXDXT : 2001–2003|
|Dyna Wide Glide CVO FXDWG3 : 2002|
|Dyna Wide Glide EFI FXDWGI : 2005–2006|
|Dyna Wide Glide FXDWG : 1999–2005|
|Softail Deluxe EFI FLSTNI : 2005–2006|
|Softail Deluxe FLSTN : 2006|
|Softail Deuce CVO FXSTDSE2 : 2004|
|Softail Deuce EFI FXSTDI : 2001–2006|
|Softail Deuce FXSTD : 2000–2006|
|Softail Fat Boy CVO FLSTFSE : 2005|
|Softail Fat Boy EFI FLSTFI : 2001–2006|
|Softail Fat Boy FLSTF : 2000–2006|
|Softail Heritage Classic EFI FLSTCI : 2001–2006|
|Softail Heritage Classic FLSTC : 2000–2006|
|Softail Heritage EFI FLSTI : 2006|
|Softail Heritage FLST : 2006|
|Softail Heritage Springer Classic EFI FLSTSCI : 2005–2006|
|Softail Heritage Springer Classic FLSTSC : 2005–2006|
|Softail Heritage Springer EFI FLSTSI : 2001–2003|
|Softail Heritage Springer FLSTS : 2000–2003|
|Softail Night Train EFI FXSTBI : 2001–2006|
|Softail Night Train FXSTB : 2000–2006|
|Softail Springer EFI FXSTSI : 2001–2006|
|Softail Springer FXSTS : 2000–2006|
|Softail Standard EFI FXSTI : 2001–2006|
|Softail Standard FXST : 2000–2006|
|Touring Electra Glide Classic EFI FLHTCI : 1999–2006|
|Touring Electra Glide Classic FLHTC : 1999–2005|
|Touring Electra Glide Police EFI FLHPEI : 2006|
|Touring Electra Glide Police EFI FLHTPI : 2005–2006|
|Touring Electra Glide Standard EFI FLHTI : 2003–2006|
|Touring Electra Glide Standard FLHT : 1999–2006|
|Touring Electra Glide Ultra Classic EFI FLHTCUI : 1999–2006|
|Touring Electra Glide Ultra Classic FLHTCU : 2005|
|Touring Road Glide EFI FLTRI : 1999–2006|
|Touring Road Glide FLTR : 1999–2001|
|Touring Road King Classic EFI FLHRCI : 1999–2006|
|Touring Road King Custom EFI FLHRSI : 2004–2006|
|Touring Road King Custom FLHRS : 2004–2006|
|Touring Road King EFI FLHRI : 1999–2006|
|Touring Road King FLHR : 1999–2005|
|Touring Road King Police CA EFI FLHPEI : 2005|
|Touring Road King Police EFI FLHPI : 2005–2006|
|Touring Street Glide EFI FLHXI : 2006|
|Touring Street Glide FLHX : 2006|
Great price, and really gave the bike a passing gear without shifting down.
Converting from the chain driven cams to the gear was a great investment. I was told that it would be nosier, but I found it to be just the opposite. The bike runs great and I no longer have to worry about chain tensioners wearing out and damaging my engine. I was a bit concerned about the adjustable push rods but have found them to be great also. If you add anything to your bike it should be this setup, if for no other reason but peace of mind.
A lot better than timing chain and tensioners. If you use this product you wont have to worry about the tensioners going out again. Way to go J&P!!!
Nothing but satisfied with purchase. Replaced my spring tensioners with this setup my bike is running great.
This is the second one of these 510G kits I have installed. I put one on my 2001 Ultra Classic and this one on my 2005 Springer Classic. Both bikes are 88 cid and It's the best thing that you can install on them. It can get a bit confusing deciding which set of directions to follow (the H-D Service Manual or the S&S directions) but 90% of the time- you should follow the S&S directions. This 510G cam kit works Very Well with the K&N Air Filter Kit RK-3910-1. This K&N kit will work on injection and CV carburetors. (You should save time and add this kit to your J&P order too.) With the 510G cam kit--I would also recommend a set of slip-on Vance & Hines exhaust. You can run the S&S 510G kit on a totally stock bike, but why not release an extra 20-35 hp with a K&N air filter kit and some V&H slip- on exhaust? One more thing, get yourself some adjustable push rods while you are at it. This saves you the trouble of removing the gas tank and rocker covers too. ;) If I were to do a third Twin Cam bike, I'd just do one big J&P order: The 510G Cam Kit-(adjustable push rods) The K&N RK-3910-1 Intake Air Filter system and some Vance & Hines slip- on exhaust. This combination is hard to beat and my buddy's 2010 103cid CVO Ultra Classic cannot outrun me...ever!
s&s gear drive 510g is a very good kit gave my bike more power above 3000 rpm. plus no more cam changes to deal with. highly recommend product. put on 04 electra glide
A different bike! The 510 setup gives my Roadking TC-88 a very noticeable "get-up-n-go" attitude. Love it!
Liked the product very much. Everything purchased was complete and delivered in a timely fashion
Bike feels better.
I purchaed these and had Kennedys in Oceanside Ca install them on my 04 Night Train. I did not expect much except to replace my blown tensioners.. I was very wrong, it woke up my bike. Love it, immediate reaction. I have this paired with a Dynojet carb kit. Hypercharger, and Bub pipes.
Went in easily works well, added performance is nice
Fast and easy delivery. Love J&P Cycles.
Cam kit was on the shelf, ready to ship when I called. Great product. My bike runs smoother and faster. J&P is great
Added in conjunction with 95" cp pistons, s&s carb and ported heads, so not sure how much to attribute to cams, but I blame the cams for the torque. Mindblowing!! Easy to instal, spent extra time on gear lash, and started with less than half thou. crank runout, so I hear no gear noise.
Had these cams installed and are pleased with the performance so far.