Everyday Low Price: $4.99
Gold Club Price: What's This? $4.49
J&P Part: 4410021
Johnny Bridges Posted:
They worked as designed but in my situation I found them to not be what I needed. It seems that while the sound was OK, I lost power. I've since given up on straight pipes altogether & learned nothing can replace a good muffler set up.
I was concerned baffles would quiet pipes down, but thankfully it didn't! Got low end performance back, too!!
I didn't like these that much
they sound good and easy too put in and a good price
Fit well, easy to install.
These work very well
The baffles has a good sound. It's still loud, just not AS loud and I can handle that.
I got these because I didn't think I had any baffles in my pipes and to try to stop a popping problem. I found out I did have baffles, but they were wide open, so I got these to fit inside the old one's and it gave the bike a nicer sound and seams to have stopped most if not all the popping.
Nice part for a smaller bike. Not right for a Harley. Will keep for another project.
Someone removed the baffles from my 2009 HD XL883L and doing that gave it a real tinny sound. These baffles turned out better than I expected and gave it a deep sound. I’m really happy and would recommend them to anyone.
They worked out perfect. No problems quick installation and they actually came in the mail within a couple days
These baffles are amazing for the price. They are small, lightweight, and very easy to install. They made my bike too quiet, but after I trimmed them down they sounded great. A very good value.
Where a little big. Had to grind them to make them fit.
Nice item that fits and functions great.
Not too shabby. They take the top end rap out of the sound, which makes for a more enjoyable(my ears would ring after 10 mins of riding before) ride. They do create a significant back pressure, so you will have to adjust your carb, but that is to be expected. They do not overly reduce the sound of the pipes , which I liked.
One baffle broke at the mounting hole in just one month from engine vibration. Had to drill a new hole on other side and remount.
Another positive review! I bought a Honda Shadow 750 Ace that had un-baffled Cobra drag pipes. It sounded good, but was CRAZY loud. These little baffles sound really nice. Can't go wrong for the money.
Not the best made baffle I've seen but for the price, I can't complain. The baffle did it's job of quieting the bike but the sound was not pleasing at all.
Used them on my 2 1/4 inch drag pipes, yes I know they were for 2". They worked great and made my bike much quitter than I expected. (may even saw them in half to get more sound) Very good value, would recomend to anyone wanting to tame down their soud.
I was apprehensive with the claimes BUT IT WORKS. The original owners removed one or two baffles in order to obtain the sound they desired. I added these this weekend and took a day trip. Perfect for me. No more ear plugs.
i purchased he mini baffles they are good quality and really good sound iwould recomend to anyone looking for a quit bike
Well built, fit good, works great.
Really served the purpose of creating a little back pressure and making the bike run better.
Excellent value & quality.
Helped with down throttle pop but made pipes a little too quiet.
I needed to tweak my aftermarket mufflers just a little and these worked great. I now have the tone that I want and less loudness at idle and they still have the sound I want at cruising speed. Easy to adapt. So cheap that I didn't have to worry if I screwed them up
helps a little
Have a Valkyrie Interstate with the 6 into 6 Cobra pipes. Wanted a sound in between with & without the stock 14" flow through cobra baffles. The 4"ers were a very tight fit as they should be. Since I wanted easier removal I ground down the circumference a bit. The full 4" baffle was quiter than my stockers. My bike usually hits 130mph on a consistant basis without stock baffles & 123mph with stock baffles. It now struggled to reach 120mph with these 4"ers. I then cut 3/5th of the baffle, or 6 of the 10 tab lengths, & now it's really close to the in between sound. Haven't rode it yet but it doesn't really matter what the top speed will be now. I'll have to live with it if I want the sound. I also used thicker 1/4" lock washers vs the flimsy things that come with them. They're well worth thier $4ea.. I was suprised at how effective they are as far as noise suppression goes. My Valkyrie at stock 93ci & 95hp is of course louder than the stock 88ci Harley 60 something hp wh
The would not fit my pipes (myfault), however they fit a buddy's and they do a FINE job of making an otherwise loud bike TOO QUIET. Material and workmanship are really nice.
I tried these short baffles in my cobra drag pipes to try to get a sound between the baffles that came with the pipes and straight pipes. They came close. I am happy with them.
Love my pipes. They sound great! Only problem I had was that the baffels did not fit the pipes so I couldn't use them. I have not mounted the tires on yet because I ordered some new rims. I love doing business with you .Thanks.......
Great little baffles, wish they were available in more sizes, need two now for wifes rebel,,, about 1 1/4"OD
Replaced 16" baffles with these 4" to cut back on the excessive popping on a down throttle. A perfect solution.
Requires Adobe Flash Player