Due to vendor restrictions this product does not qualify for this offer.
Everyday Low Price: $3.99
Gold Club Price: What's This? $3.59
J&P Part: 4410022
Sold in Units: Each
i did not purchase this item
I needed something to tone down my drag pipes on my vulcan. I spoke with metric tech, he gave me good advice and product. Had to cut the baffle down some to get the sound just right. Very easy install and shipping was incredibly fast. Will go hear from now on for my bike needs.
Unless you cut it even shorter, or open it up by bending the barffles, be prepared for a surprising reduction in growl - especially if you wrap the narrow section. Fit in pipe was great, but really castrated my engine's sound. Went from a roar to a "pffft- pffft" sound that was even less appealing than the stock mufflers.
Had to cut an inch off, but got the sound and back pressure I wanted, for a great price! J&P service is second to NONE!
Great product these were exactly what I needed
Fast delivery and fit was good. Exactly what I ordered.
changed to mounting bolt to something more appealing and lower profile. otherwise good product
fit perfectly in my custom exhaust
Had to open them up to get the sound I wanted, but gave me the back pressure needed to bring back the lowend of my 883 and it also cleared a high RPM hiccup it was having
Installed these only to get bike inspected. They will do the job nicely.
Worked well and easy to install. Quick shipment.
Exactly what I needed for the perfect sound. Very simple to install
As advertised. Made the straight pipe more quiet, more neighbor friendly.
Very pleased, especially for the price.
baffle are fine
excellent for the price
unbelievable for the price. work great in addition to straight pipe baffles.
nice short little baffle. easy to install.
not quite the sound i was looking for, i have a 74 shovelhead and she didnt like them at all,well made though
perfect fit ,got my bike inspected
My pipes were way too loud for the city and they worked well... Great price and easy to install. If you want to cut down on the noise, these will help...
reduces sound a little, makes backpressure like I wanted
Good quality baffles. Made my custom exhaust function great.
sounds terrible, took em out
Using in my XR 400- works great- getting some back pressure now and added torque. Is even somewhat adjustable with a screwdriver and a little pressure on the tabs.
I'm mixed on these. the build is good, they fit correctly, easy to install. it's just they make your ride sound like c**p
The pipes do minimize the noise, I believe I should have gone with a 12" it would have been better choice.
Well made and fit great
Work great to cut noise...still has a good sound
nice fit, sounds good.
easy install, sounds good
OK. If you need a cheep short baffle, this one works.
don't like the sound.
Typical inexpensive baffle. Hasn't changed in 20 years, but still gets the job done.
Couldn;t stand the sound of baffles, so thought these might be a little better. Still did not like them. Took them out all together and put some power cones in instead.
work great better bottom end and not near as loud but still a deep throaty sound
installed in a set of Santee LAF pipes to bring the sound down some and for tuning, worked out with minor mods to the baffle. if you do not have much room to work with these are the ticket.
Worked great, just the right size and sound I was looking for. Does cut the sound down more than you would think for such a small baffle. It was perfect for me. Highly recommend
I bought the 4010022 4" mini baffles for my Star Warrior 102 ci motor to cure off idle hesitation with my open Samson Street Sweepers. They choked the motor & were too quiet stock. I cut off 2-1/8" off the end & made torque cones that sound great & still have plenty of back pressure which cured the hesitation & improved the low & midrange torque. The price can't be beat also.
These little baffles worked great and were easy to install. They made my bike too quiet so I did a little adjusting with a screwdriver. Got a nice pitch now and can feel the added power to my stock Evo engine. The price is unreal and they work great, especially at less than 5 bucks each. Thinking about swaping them out in my Shovelhead next.
Awesome. Didn't take [away] much of my sound, but gave me all the back pressure I needed for my Ironhead.