Due to vendor restrictions this product does not qualify for this offer.
Fitment Note: Fits BUB Jug Huggers.
This product was proudly made in the USA
Manufacturer Part Number: SPZBJH2.5
Sold in Units: Set
I am very happy with the baffles they worked exactly as advertised. If you install these on the jug huggers back out the set screw so it is flush with the inside of the pipe slide the baffles in and align the screw hole with the screw using a pair of needle nose pliers then tighten the screw. If they don't slide in use a piece of wood and hammer to tap onto place. Do not remove the screw all the way because that requires you to align the shield pipe and baffle which is very difficult.
Email A Friend