Vance & Hines 18mm Plug Kit for O2 sensor
Vance & Hines 18mm Plug Kit for O2 sensor
• Fits 18mm sensor hole in exhaust pipes• Replaces O2 sensor when it is removed| Complete Header Pipe: | Complete System | Header Pipe Diameter: | 1-3/4″ |
| Manufacturer Part Number: | 16925 | Material: | 16-gauge Steel |
| Sold in Units: | Pair |
Note: This item is a universal/custom fit component, and does not have any direct standard/OEM model application. Some items may require modification and an advanced level of mechanical skill and/or knowledge for installation.
mojoman59 Posted :
very good product. make sure you use high temp thread sealer and some Loctite
dmicah44 Posted :
worked great, sealed well and as always fast delivery.
beeamone Posted :
Price is always right with JP Cycles!!!
jeffro6169@yahoo.com Posted :
fit good good price
dragrace990 Posted :
right part for the job
jason.smithone@bigpond.com Posted :
suitable
cnicky01 Posted :
definitely does the job. no complaints here....
fasteddiekona Posted :
plug kit for sensor fit nicely. I recommend them if you need plugs.
Tepark1958 Posted :
Easy to install, my 06 Nightrain does not have O2 sensors
HDFF57 Posted :
Worked just fine
Hinder Posted :
Perfect fit.
bigdugster Posted :
Works Perfect
Pretenderz Posted :
Should be an item referanced for as needed
kevick29 Posted :
just what i needed
smalott Posted :
plugs fit just right..
trewq2 Posted :
What can I say? The 18MM kit sensor plugs were a perfect fit for the Vance & Hines Shot Gun exausts & the quality was of the highest standard. B. Griego
Traubel Posted :
Worked great with no problems.
WingsFan47 Posted :
They did the job. Not much to say about two pipe plugs. Worked fine and as expected.
ronraines@hotmail.com Posted :
Worked as they should but seems like these should have been included with the Big Radius pipes I purchased.
paolazobel Posted :
Good to take off the o2 sensor on my V&H
67v35er Posted :
No problems with these and they fit as you would expect. The do turn kind of a corroded, white color after some miles because they are zinc plated steel and the zinc plating doesn't stand up to the high heat in that area of the exhaust pipe. Can't really see them anyway after install on the Big Radius pipes as they are more or less hidden from normal view. Be sure to use some high heat anti-seize in case you ever need to get them out to install O2 sensors.
buster_lloyd Posted :
had to have em
lordgwilym Posted :
Did exactly what they were designed for!
mwestman Posted :
As advertised...plugged the sensor hole. Strongly recommend a small tack weld to hold it in place. The plug on my front pipe came loose and shot across the interstate under heavy acceleration. I replaced it by welding a carriage bolt head in the hole. Permanent, but effective!
david.w.gentry@navy.mil Posted :
great fit and great quality
ratliffd Posted :
Perfect fit.
Requires Adobe Flash Player
2013 Harley Catalog, Page 168 2013 Harley Catalog, Page 169 2013 Harley Catalog, Page 170 2013 Harley Catalog, Page 172 2013 Harley Catalog, Page 190 2013 Harley Catalog, Page 191 2013 Harley Catalog, Page 192 2013 Harley Catalog, Page 193 2013 Harley Catalog, Page 194 2013 Harley Catalog, Page 205 2012 Harley Catalog, Page 161 2012 Harley Catalog, Page 162 2012 Harley Catalog, Page 164 2012 Harley Catalog, Page 179 2012 Harley Catalog, Page 193 2011 Harley Update Catalog, Page 161 2011 Harley Update Catalog, Page 165 2011 Harley Update Catalog, Page 193 2011 Harley Catalog, Page 153 2011 Harley Catalog, Page 157 2011 Harley Catalog, Page 185Important Product Notes
Note: Please see U.S. EPA and your respective state and local regulations to confirm noise and emission compliance.Important Exhaust Notes:• Note: With any new exhaust, we recommend changes to carburetor jetting or use of an aftermarket fuel injection control module.• There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.• Flanges and retaining rings are not included with most aftermarket exhaust for 1984-2013 Evolution and Twin Cam models. Re-use your existing hardware, or purchase replacement hardware.Vance & Hines 18mm Plug Kit for O2 sensor?
Our customer service has the answer.
1-800-318-4823
