Everyday Low Price: $249.95
Gold Club Price: What's This? $249.95
J&P Part: 450-528
This item qualifies for free ground shipping
This product has an attached note. View Product Note
This product was proudly made in the USA
Additional oversized shipping charges will be applied for expedited shipments within the contiguous U.S. Shipping charges outside the contiguous U.S. are calculated by weight and dimension during checkout. Due to state regulations we cannot ship this item to the state of California for some motorcycles.
|Dyna Low Rider Convertible FXDS-CONV : 1994–2000|
|Dyna Low Rider EFI FXDLI : 2005–2006|
|Dyna Low Rider FXDL : 1993–2005, 2007–2013|
|Dyna Street Bob EFI FXDBI : 2006|
|Dyna Street Bob FXDB : 2007–2015|
|Dyna Street Bob FXDBP : 2013–2014|
|Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006|
|Dyna Super Glide Custom Anniversary FXDC : 2013|
|Dyna Super Glide Custom EFI FXDCI : 2005–2006|
|Dyna Super Glide Custom FXDC : 1992, 2005, 2007–2014|
|Dyna Super Glide CVO FXDSE : 2007|
|Dyna Super Glide CVO FXDSE2 : 2008|
|Dyna Super Glide EFI FXDI : 2005–2006|
|Dyna Super Glide FXD : 1995–2005, 2007–2010|
|Dyna Super Glide Police FXDP : 2004|
|Dyna Super Glide Sport EFI FXDXI : 2005|
|Dyna Super Glide Sport FXDX : 1999–2005|
|Dyna Super Glide Sturgis FXDB-S : 1991|
|Dyna Super Glide T-Sport FXDXT : 2001–2003|
|Dyna Wide Glide CVO FXDWG3 : 2002|
|Dyna Wide Glide EFI FXDWGI : 2005–2006|
|Dyna Wide Glide FXDWG : 1993–2005, 2007–2008|
I really Like the Python 3 Pipes I put on my softtail classic they give it a great sound and increased my performance. I would have to give them a 2 thumbs up.
I like the sound of these slip-ons better than the Python 3 full system I have on my Wide Glide. Good instructions and needed parts, easy install.
This slip-on kit is fantastic. I was prepared for a compromise on the sound for the price, but the sound (and look) is absolutely awsome. Very happy with the cost compared to a complete exhaust system. Friends who spend close to $1000 for their complete systems now regetting their decisions. Easy installation, GREAT price, and that Harley sound- Hard to beat..
pipes came in very fast.very easy to install after I got the first stock pipe off little louder then I expected but that bothers only the neighbors not me.had it rejetted like it says in the directions and it runs great worth every cent
These slip-on mufflers are the best. The deep fierce tone they produce on my 883 sounds phenomenal. They also look much better than the stock mufflers. Python 3 is embedded on them so your friends won't have to ask you what kind of pipes they are. They are easy to install and remove. They utilize your present head pipes and heat shield. This is the best bang for your buck!!!!!!!!!!! Way to go Python!
Python slip-ons were bought for my son-in-laws first Harley. Loud pipes save lives. He put them on by himself with minimal coaching from me. He is a good kid, but mechanically, it is not him. Perform great. Usability-wise, if he can put them on right the first time, anyone can. Great job once again guys. If you could have seen his face when he fired her up! Thanks.
In less than 30 minutes I had the old pipes off the the Pythons on. Looks and (especially) sounds GREAT! I would recommend them to anyone who wants that big V-Twin sound on a Sportster.
Installed these Python3 slip-ons on my wife's '06 Sportster 1200C. Installation was a breeze. They look great but the most notable difference was the sound compared to the "way-too-quiet" stock muffs. They sound awesome. Deep rumble but not too loud and obnoxious. Took our first ride together last evening....she's a happy camper!!! I could actually hear her behind me over my loud pipes which I couldn't do before. Rating would probably be a 5 but it's too soon to judge how well the chrome holds up. I highly recommend these muffs for anyone who likes the staggered pipe look and doesn't want to pay twice the price for the same result(making it sound like a Harley!). Only regret: They're not available for my 05 Lowrider :(
One word "wow"---what a difference from the stock mufflers. I installed these on my 2006 xl883 sportster. Low deep rumble when bike is idling. But not way too loud when riding. 4-wheelers definitely know you're there next to them. Everyone that has heard them wants Python now for their bikes. I bought these without hearing them, but trusted the reviews on this website. Pick these up if you want that big harley V-Twin sound on a Sportster.
The deep rumble is outstanding. Everyone has something to say about how nice my sporter sounds. Best bang for the buck..(!(!
made my nightster sound like a monster! love them
sound great, sportster rumbles like a big bike
They fit perfectly!
Just finished putting the Pythons on my Sportster. WOW What a difference from the stock mufflers. Installation was very easy and the sound is awesome
If you looking for that head turning sound you need to buy these exhaust. They sound great on my 1200 Sportster. And they look great too.
Had them put on in about a hour and sounds great!
All I can say is WOW! I put these on my '06 XL883C and it's probably some of the best money I've ever spent on a cycle. The sound is incredible. Definitely worth the price. Great sound without the huge price. The hardest part about the whole installation was getting the stock mufflers off and even that was rather easy.
Great product for the price. Sounds great on my Nightster..
After I got my 07 883 I was happy then I purchaced the Phyton 3 slip-ons and I was stoked. Not the deepest sound more of a thumping, dragbike sound that not only turns heads but recieve alot of praise. Easy install and can't beat the price.
Easy to install and sounds great.
Pipes are alot louder then expected.
Amazing pipes! Got mine today and installed them right away. After installation i started the bike up to hear the sound and it was A LOT louder than i expected. I was expecting a slight increase in sound, but WOW. I have an Iron 883 and i am VERY happy i bought these for it.
Loud! wow.. did not realize that these pipes would be so loud, 5 min on my bike with these things and I still cant get the smile off of my face! easy install, aggressive sound, and great looks!
Love these pipes! Quick install, and they sound so darn good!!
Very loud. Never been mechanically talented but i figured out installation in couple hours. Worth every penny.
I had these installed on my Sportster '48, along with an Arlen Ness air cleaner and an electronic EFI unit. The sound is both deep and aggressive. Loud when you tweek the throttle. Horsepower is increased and rev limit is increased to 7000rpm. The chrome is of a very good quality, and I am glad I did not waste my money on a pair of expensive brand name mufflers that cannot compete with these.
Great sound, no remap. People think I have a1200, instead of 883...
Slim 50 Posted:
Really like the sound!!!
What an improvement on performance and sound. Exactly the sound I was looking for on my 2007 XL1200L. These pipes are highly recommended.......Best part of the install is not having to remap my ignition with these slip-ons. Be sure to order the gaskets for the crossover tube....
I just finished putting them on my 1200 Sportster. I was a little uneasy about re-using my crossover gaskets because I ripped them taking them out of the old mufflers, but they turned out to work okay. THESE MUFFLER ROCK! My bike went from a stock purring sound to a "I've got a set" sound. I highly recommend them!
These mufflers made my sportster sound like a harley davidson now. If you have a sportster you need a set of these mufflers.
Wow! You can watch every youtube video of these python pipes but nothing can compare to the real thing. These babies are loud! Installation is a breeze, hardest part is getting off the stock mufflers, which will vary. My 883 sounds mean now, great service, great product!
Product is awesome!!! Good shipping time!
I installed these on my 06 Sportster 883 Low and I really like the way the bike sounds now and it looks good too. This was my first muffler installation and it would have been nice to know that I might have needed some donut gaskets for the crossover tube. I was able to reuse mine so there was no problem, but I could see if someone had more miles on their bike it would be a good idea to have some handy.
Super easy install. Bike sounds awesome. Nice deep tone. Loud but not obnoxiously loud.
my bikes sounds awesome. now I feel like im riding a Harley
I just got these mufflers on. Wow!! what a difference from the stock mufflers on my 1200 Low. Fired up my wife's Soft Tail Deuce with full V&H 2 into 1 pipes and the sound is comparable! Make sure to get the exhaust crossover gaskets before you start. Easy step by step instructions for removal of old mufflers and installation of these Python 3 pipes. The hardest part was getting my old pipes off. I rate these pipes a 10. Nice and loud, as they should be to save lives.
Nice throaty sound, easy install, pipes look good!
I love this item....And look forward to many more purchases for J&P Cycles!!!!
These pipes are great. Completely changed my 07 1200 Low to a big bike. Sound good and make the bike look good. After you fight the stock mufflers off, be sure you have a pipe expander to get these to "slip" on the head pipes. They are tight !!
sound and performance were superior.a bit of a pain to install but that was not the manufacturers fault,just getting my big mitts in tiny space between slip-ons.
i was convinced to get the pythons after readind the reviews. like most of you, i love them. this is the 2nd day riding after installation on my heritage and they sound great. on my first ride they sounded really loud. a strong rumble and increased performance. 5 star in my book.
Beautiful, sounds great, all this at an affordable price
Easy install, sound awesome!
Easy to install; incredible sound. Worked perfect!
Incredable sound and improved performance. A litle pricy but worth it.
Unbelievable sound! Not at all obnoxious sounding. Gives the classic Harley rumble without blowing out your ears! So easy to install, I thought I did it wrong.
FIVE STARS!!! Easy installation, and Bike sounds amazing!!! I was skeptical at first about slip ons, but these are worth every penny..even look fantastic.
Put them on my 2012 street bob and they sound great. The hardest part of the install was getting the stock ones off.
These python slash cuts sound much better than I was expecting for the money. The factory pipes that came on my super glide made it sound like a volkswagon, now it sounds like a bad a** harley. I purchased them because they had good ratings, I can see and hear why now.
Took less then 30 min to install. Had no issues. Pipes are loud. I like it!! They do sound kind of hollow though. Still a very big improvement over the stock pipes on a 2013 FXDB. I would reccomend these to friends.
I like this rest of these folks put these on my Dyna an wow what a difference. The sound was awesome deep and throaty But not crazy loud enough so they can hear you. Changed to a high flow air cleaner and added a TTS mastertune. The performance is incredible. Highly recommend doing the whole package.
I received a set of these pipes as a Christmas present, and as far as getting motorcycle parts for Christmas goes, they are a winner! I had them installed on Christmas morning; took me about forty minutes, most of which was getting the old mufflers, particularly the front one, off. The Pythons went on as though they were a stock part; perfect fit! The chrome is beautiful and the welds are very neat and precise. The sound, however, exceeds the looks! These pipes have a nice rumble, and when cruising, they're loud, but not obnoxious. Under hard acceleration, however, these pipes are really loud! The sound, both at idle, cruising speeds, and under acceleration, is fantastic! A deep rumble at idle, and a purposeful growl as she cruises. Starting the engine is a treat every time. And while Vance and Hines pipes sound great, it's nice not to sound like everyone else. Performance improved slightly all around; these pipes are a nice compliment to the high flow air cleaner. While I did not need to do any jetting, I will be doing that this week in order to get the most out of them. I highly recommend this product!
Requires a browser that supports HTML5.
Note: Please see U.S. EPA and your respective state and local regulations to confirm noise and emission compliance.Important Exhaust Notes:• Note: With any new exhaust, we recommend changes to carburetor jetting or use of an aftermarket fuel injection control module.• There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.• Flanges and retaining rings are not included with most aftermarket exhaust for 1984-2013 Evolution and Twin Cam models. Re-use your existing hardware, or purchase replacement hardware.