Everyday Low Price: $29.99
Gold Club Price: What's This? $26.99
J&P Part: 500-346
This product was proudly made in the USA
Great fit and took all te play out even with my tall bars!
Exactly what I needed
Only complaint is like most of Ness products they didn't fit properly. Waay too tight. Not a biggie but really? The holes in HD risers havent changed since the 70s. had to file some material to fit.None of this is J&P's fault .
Thightened up my ape hangers very well, Got rid of the 'spungies'.
Don't do what people on here are saying about cutting the rubber to make it fit, you are just speading up the process of wear and tare. Simply take a bolt and nut with OLD or SPARE* metal caps and rachet them into place. I emphasize old or spare because the process will bend and stratch them. They fit great, though unfortunatly with the amount of torque my bars create, still have some play in the bars.
MUCH better than stock!!!!
Great product. No flex even when pulling hard on 18 inch bars. Anti seize for easier installation should be used.
you have to have these if you have apes
Made a difference using taller risers - got rid of a lot of vibration. Doesn't feel mushy, either. Had to chamfer the edges of the rubber to get it to fit in the triple tree, but no worries!
Took all the play outta my bars and with little vibration gain over the stock rubbers. Install was easy as well....just use a nut and bolt along with the old metal caps to press them in place.
Great fit and quality
made a hell of a difference had to bevel ends a little to get them started but they took care of that mushy feeling
Very happy with these bushings I have apehangers with a sixteen inch rise and six inch risers and I have no flex or give in the bushings, but I do not get the vibration that you get with solid bushings.
Awsome. I tried to ride my '04 custom chopper without them and finally broke down and ordered some. What a huge diffrence.
Requires Adobe Flash Player