Due to vendor restrictions this product does not qualify for this offer.
Design: Diamond knurled
Drilled for Wiring: No
Material: 14-Gauge Steel
Sold in Units: Each
Style: OEM Style
With/Without Dimples: With
To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.
To most closely match the measuring system used on our site, we recommend the following method:
Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.
|Softail Bad Boy FXSTSB : 1997|
|Softail Heritage Springer Classic EFI FLSTSCI : 2005–2006|
|Softail Heritage Springer Classic FLSTSC : 2005–2007|
|Softail Heritage Springer EFI FLSTSI : 2001–2003|
|Softail Heritage Springer FLSTS : 1997–2003|
|Softail Springer EFI FXSTSI : 2001–2006|
|Softail Springer FXSTS : 1997–2006|
Great bars! The description doesn't tell you if they are drilled for cable retainer clips, which they are not.
after months of ordering from the dealer, I finally found the right ones at jp cycles
Email A Friend
Select Your Motorcycle