World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!


Shop Black Friday Deals
Shop Black Friday Deals

LA Choppers Hefty 4.75″ Road King Handlebars

Product may vary from photo(s).


The Gold Club is our premier membership program. For most items members receive 10% off every day, plus exclusive sales and benefits just for members. More Info Gold Club Price: $107.99

Free Ground Shipping

J&P Part: 503-393

– Order in the next to ship today


LA Choppers Hefty 4.75″ Road King Handlebars

• 4.75″ Rise, 12.5″ Pullback, 10″ Center Width, 34″ Width

• Chrome-plated polished finish

• Dimpled and drilled for internal wiring

• Tapered for clearance of master cylinders and hydraulic clutch assemblies

• 1-1/4″ diameter in the clamping area and will require use of special risers

Made In The USA This product was proudly made in the USA

Product Specs

Center Width: 10″

Diameter: 1-1/4″

Drilled for Wiring: Yes

Finish: Chrome-Plated Polished

Height: 4.75″

Manufacturer Part Number: 0601-0611

Material: Steel

Pullback: 12.5″

Rise: 4.75″

Sold in Units: Each

Width: 34″

With/Without Dimples: With


Handlebars Measuring Guide

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.

To most closely match the measuring system used on our site, we recommend the following method:

Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.

Diagram of Handlebar Measurements
Diagram of Handlebar Measurements
Width: Measure between the two outside points of the handlebars.
Center Width: Measure between the two inside points of the handlebars.
Rise: Measure from the base of the handlebars to their highest point.
Pullback: Measure from the front of the bars to the furthest point back.

Additional Considerations:

  • Handlebars for Springer Softails are different than bars for other bikes. Learn More
  • We offer bars in two groupings by year of fitment — pre–1982 and later models. The differences are the result of a change of configuration in the switch housings. Learn More

Important Product Notes

Note: Not for use with stock handlebar/gauge mounts on 883C/1200C models.
Note: Handlebars are 1-1/4″ diameter in the clamping area and will require use of special risers.

Shipping Note

Additional oversized shipping charges will be applied for expedited shipments within the contiguous U.S. Shipping charges outside the contiguous U.S. are calculated by weight and dimension during checkout.

Fast Free Shipping on Orders at $99.99 & Over
Free Tech
120 Day
Live Help

Get Help From Our Industry Experts

Call Us 24/7 1-800-318-4823

Help / FAQs