World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!

Menu

Fast Free Shipping on Orders at $39.99 and over
Fast Free Shipping on Orders at $39.99 and over

Roland Sands Design 1" Black Clip-On Handlebars for 49mm Forks

Select your motorcycle to guarantee fitment! Select A Motorcycle

  • Roland Sands Design 1
Product may vary from photo(s).

$224.96 Save 10%! Regularly: $249.99

Free Ground Shipping

J&P Part: 506-062 On Sale!

– Order in the next to ship today

Description

Roland Sands Design 1" Black Clip-On Handlebars for 49mm Forks

Fitment Note: Fits onto 49 mm fork tubesThis part has no direct OEM application..

• The RSD 1" Clip-Ons mount to the front forks, below the top triple clamp, for a low handlebar position

• They utilize all stock wiring, so there is no cutting or soldering required

• The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings

• Adjustable to any pullback and any height between top and bottom triple clamps with a fixed 5 degree down angle

• Bars feature interchangeable RSD Logo Badges (Black and Brass)

• May need to shorten, cut and/or solder wiring, depending on current bar height

Made In The USA This product was proudly made in the USA

Important Product Notes

Product Specs

Diameter: 1"

Drilled for Wiring: No

Finish: Black

Manufacturer Part Number: 0208-2042-B

Sold in Units: Pair

Sizing

Handlebars Measuring Guide

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.


To most closely match the measuring system used on our site, we recommend the following method:

Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.

Diagram of Handlebar Measurements
Diagram of Handlebar Measurements
Width: Measure between the two outside points of the handlebars.
Center Width: Measure between the two inside points of the handlebars.
Rise: Measure from the base of the handlebars to their highest point.
Pullback: Measure from the front of the bars to the furthest point back.

Additional Considerations:

  • Handlebars for Springer Softails are different than bars for other bikes. Learn More
  • We offer bars in two groupings by year of fitment — pre–1982 and later models. The differences are the result of a change of configuration in the switch housings. Learn More

Fitment

Select your motorcycle to guarantee fitment! Select A Motorcycle

Fitment Note: Fits onto 49 mm fork tubesThis part has no direct OEM application..

Click (+) to view all compatible models

Harley-Davidson® Models

Dyna Fat Bob CVO FXDFSE : 2009
Dyna Fat Bob CVO FXDFSE2 : 2010
Dyna Fat Bob FXDF : 2008–2014
Dyna Low Rider EFI FXDLI : 2006
Dyna Low Rider FXDL : 2007–2013
Dyna Street Bob EFI FXDBI : 2006
Dyna Street Bob FXDB : 2007–2014
Dyna Street Bob FXDBP : 2013–2014
Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006
Dyna Super Glide Custom Anniversary FXDC : 2013
Dyna Super Glide Custom EFI FXDCI : 2006
Dyna Super Glide Custom FXDC : 2007–2014
Dyna Super Glide CVO FXDSE : 2007
Dyna Super Glide CVO FXDSE2 : 2008
Dyna Super Glide EFI FXDI : 2006
Dyna Super Glide FXD : 2007–2010
Dyna Wide Glide EFI FXDWGI : 2006
Dyna Wide Glide FXDWG : 2007–2008, 2010–2014
Fast Free Shipping on Orders at $39.99 and over
Free Tech
Support
Largest
Selection
120 Day
Returns

Select Your Motorcycle

×
Live Help

Get Help From Our Industry Experts

Call Us 24/7 1-800-318-4823

Help / FAQs