J&P Cycles® Chrome Kickstand
J&P Cycles® Chrome Kickstand
Fitment Note: For lowered bikes.
• Great piece for lowered bikes that want to keep a more stock appearance• 1″ under stock for lowered bikes to keep the correct lean angle preventing tip-over• Fits all Dyna models except the Convertible• Shorter version of H-D OEM 49704-90B| Design: | Dyna Glide® | Finish: | Chrome |
| Material: | Steel | OEM Reference: | 49704-90B |
| Over/Under Length: | 1″ Under Stock | Sold in Units: | Each |
| Style: | Shorter |
Fitment Note: For lowered bikes.
- Dyna Fat Bob CVO FXDFSE : 2009
- Dyna Fat Bob CVO FXDFSE2 : 2010
- Dyna Fat Bob FXDF : 2008–2013
- Dyna Low Rider EFI FXDLI : 2005–2006
- Dyna Low Rider FXDL : 1993–2005, 2007–2011
- Dyna Street Bob EFI FXDBI : 2006
- Dyna Street Bob FXDB : 2007–2013
- Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006
- Dyna Super Glide Custom EFI FXDCI : 2005–2006
- Dyna Super Glide Custom FXDC : 1992, 2005, 2007–2013
- Dyna Super Glide Custom FXDC Anniversary : 2013
- Dyna Super Glide CVO FXDSE : 2007
- Dyna Super Glide CVO FXDSE2 : 2008
- Dyna Super Glide EFI FXDI : 2005–2006
- Dyna Super Glide FXD : 1995–1997, 1999–2005, 2007–2010
- Dyna Super Glide Police FXDP : 2006–2007
- Dyna Super Glide Sport EFI FXDXI : 2005
- Dyna Super Glide Sport FXDX : 1999–2005
- Dyna Super Glide Sturgis FXDB-S : 1991
- Dyna Super Glide T-Sport FXDXT : 2001–2003
- Dyna Switchback FLD : 2012–2013
- Dyna Wide Glide EFI FXDWGI : 2005–2006
- Dyna Wide Glide FXDWG : 1993–2005, 2007–2008, 2010–2013
paquick Posted :
Great price, awesome product. Speedy shipping too.
nelson.amaral Posted :
Out"standing"... Fit perfectly and works quite well.
ddanchuk Posted :
Kickstand sent was rusty, however the JP service team responded quicly to replace it with a good one
laiastarr Posted :
fast service love the product will do bussiness again
Desertram800 Posted :
Works great, but it doesnt fit like the OE part, it hits the primary cover, and you will have to reach down with your hand to put it down, as it doesnt stick out far enough to find with your foot.
scoopnisker Posted :
Perfect fit. 5 minute install. My lowered Dyna sits the way it's supposed to again.
railroader19 Posted :
Lowered my bike a 2006 wide glide with the burly slammer kit. When i put it on the stock kickstand, it wouldn't lean at all. Put this one on and it fixed that problem, sits how its suppose to now. Very please with the purchase.
Placsko Posted :
Looks great. Won't be able to check out quality until summer. Customer service excellent!
Pablotheinsane Posted :
Fit-up was fine. Complaint would be the kickstand when lowered wants to return to retracted position before wheight of bike locks it in. Stock kickstand did not have this problem. Shorter kickstand did make huge difference in parking a lowered bike on (even minor) sideslope. Stock length did not allow bike to lean enough when parked even on level ground, so thanks for that improvement.
jerflores Posted :
Worked great, easy install and it definately helped keep the kickstand up where it needs to be, as the stock was slipping down and scraping. Only thing is the short distance means it bumps the primary, so I put some duct tape/padding to protect primary. Doesnt look as bad as it sounds.
itsallconcrete Posted :
nice kickstand but 1 in. shorter means it stops against the primary case instead of the frame reaching down with your left hand is the only way to pull it out...
gwmesler Posted :
I lowered the front of my Dyna Lowrider 1" and the rear 1". The bike looked like it was standing straight up. So I installed this kickstand and now the bike has the proper stance. This kickstand doesn't stick out as far as the stock one so it's hard to catch it with my boot. Sometimes it's kind of difficult to find it without bending down to look for it.
august64 Posted :
This kickstand is wonderful. I have a 06 FXDCI and my husband lowered it. I was haveing a really tough time with the kickstand. I looked everywhere for a shorter one and Harley Davidson did not have one. You made my day when I found this 1" shorter kickstand. I have put it on my bike and it makes all the difference in the world when I park or go to take off. THANK YOU JPCYCLES. You have gained a customer for life.
dwcoffey6 Posted :
I had looked everywhere for a shorter kick stand for a lowered Dyna. No one else had one. J&P had one and it is perfect. It looks just like the original just shorter. Excellent quality. Looks just like H-D. (Not sure it isn't) Bike now leans like it did before I lowered it. Problem of bike being to upright and want to fall over the opposite wayis over. Thanks Guys. Great product and pretty good price.
scorpionest Posted :
Excellent customer service, product and delivery. Will definitely use J&P for my other needs. Thank you.
gene992 Posted :
I expected a cheaper immitation of the OEM side stand, but got one just as good as the original.
DIANASTOYBOX Posted :
I have looked from state to state, dealer to dealer for 2 years looking for a kickstand to fit my very low Superglide. I even went to custom bike shops and FINALLY J&P saved me. Now I can park anywhere. Thanks so much.
J&P Cycles® Chrome Kickstand?
Our customer service has the answer.
1-800-318-4823
