Due to vendor restrictions this product does not qualify for this offer.
Fitment Note: Fits with Oval OEM cover.
Fitment Note: Fits with Oval OEM cover.
|Sportster 1200 Custom Anniversary XL1200C : 2013|
|Sportster 1200 Custom XL1200C : 2008–2010, 2012–2014|
|Sportster 1200 Custom XL1200CA : 2013–2014|
|Sportster 1200 Custom XL1200CB : 2014|
|Sportster 1200 Custom XL1200CP : 2012, 2014|
|Sportster 1200 Forty-Eight XL1200X : 2011–2014|
|Sportster 1200 Low XL1200L : 2008–2011|
|Sportster 1200 Nightster XL1200N : 2009–2012|
|Sportster 1200 Roadster XL1200R : 2008–2009|
|Sportster 1200 Seventy-Two XL1200V : 2013–2014|
|Sportster 883 Custom XL883C : 2008–2009|
|Sportster 883 Iron XL883N : 2010–2014|
|Sportster 883 Low XL883L : 2008–2010|
|Sportster 883 Roadster XL883R : 2008–2010, 2012, 2014|
|Sportster 883 Standard XL883 : 2008–2009|
|Sportster 883 SuperLow XL883L : 2011–2014|
Love it...looks good installs easy works like a champ.
Very easy to install and, with the proper tuning or carb adjustment, will provide a very noticable increase in horsepower
Improved power and fuel economy. Doesn't cover up the engine like other models and brands.
bolted right up, no issues. and with rejetting carb, runs better than is has with stock filter. will be buying more parts from J&P Cycles.
Really woke up my 98 wide glide! Looks great too. I was able to use the stock air cleaner cover to maintain that stock look. Easy to install but follow the instructions and make sure you get your gasket and o rings in place properly.
Hey what can you say it is an Air Cleaner. The install went well but all the holes didnt line up exactly so I had to tweek it a little bit to get the bolts into thier hole. I have a 04 Road king at works and it fits very well. Yes I would recommend this product to you.
I am very happy with filter and the price was right.You don't even know its there but it WORKS
it a must have , say bye bye to stock
I had this installed on my '09 Street Bob using the original air cover. I didn't notice until it was too late but the cover is too close to the tank and has rubbed a groove through the paint and into the metal on the bottom side of the tank. I took it apart but there apears to be no adjustments that can be made to the positioning.
I couls tell a lot of difference in power. I love this thing
Outstanding unit, improves performance, a must if you run true duals and are carbed.
I really liked the design, installed without any problems, but the instructions could have been better.
Love it. Works with the original cover, but looks great naked.
Easy installation. Fast shipping.
Good fitup, sounds great, stock cover fit as adv.
This filter kit looks great and performs as well as the stock one does.
This sucker delivers! I was skeptical of how much of an improvement I would get out of the Big Sucker. Install was relatively easy with the instructions, however if you can take off the stock box and breather you can put this guy on no problem. I immediately noticed the throttle responds much quicker without a hesitation. Fit and finish is top notch just like performance.
Arrived quickly and even though the instructions could have been more detailed, it was very easy to install.
If your going to change your pipes you have to change your air cleaner so your bike can breath and boost your horse power
Was easy to instal. Works great with stock air cleaner cover on my heritage. Gives bike a lot better breathing than stock.
Wow. Alot of bang for your buck. Plus easy to install
Very happy with this item. Was easily installed on my 2013 FatBoy, and my factory air cleaner cover could still be used.
high quality unit good design. only one thing on my wide glide had to use a couple of washers between stock cover and new filter to keep from puckering the outer cover.
Great product! Easy to follow instructions. Straight forward installation. This air cleaner clearly outperforms the stock air cleaner. Happy with the results so far.
Good quality. Very easy to install.
Good Product easy install
Nice Air Cleaner, simple to install. Alows the bike to breath alot better.
Quick and easy to install. Big improvement over stock.
Got this on 8/13. Took about 20 minutes to install. Instant power!! I highly recommend this upgrade. I did not rejet my carb, but did adjust the air idle mixture. Runs like a champ!!!
Worth the money, easy install. Immediate improvement. Rapid throttle response increased torque. must be installed with fuel pack and slip-ons or header pipe.
Easy to install great product
I plan to buy this for my 2005 Road King classic. I also plan to buy billet cover 605-924 which matches the derby cover and timing covers I have already purchased. Should look great!
Received it fast, easy to install, works great.
This was the 1st thing I did to my 06 Train when it was new. Was simple stupid install and can't beat for bang for your buck. It really shines once you get away from stock exhaust.
Very nice quality and simple installation
Easy installation .. Solid and strong support for the air cleaner factory cover. Doesn't put the air filter assembly out so far as to interfere with your leg at all. Good unit. Breaths better and is protected by the Harley cover .
Nice product. Easy to install. Chrome back plate is nice. It was an option on other stage 1 filters I was looking at. Big difference it made on my fat boy.
Easy to install nice performance booster
High quality Arlen Ness air filter kit. Fit perfectly, scooter runs a little better with a little more throttle response with Rush Slip-On Mufflers with NO Fuel Management system (i.e. Vance/Hines Fuel Pak, Harley Race Tuner, etc.) added. Fast FREE shipping, Very Good Price. Excellent purchasing experience with J & P Cycles.
Order status.arrival request?
Great filter, easy installation
This is my third Big Sucker and now have them on all my bikes. The quality is great and installation really could not be easier. Arlen Ness even has a walk through video on their website you can watch as you install this kit.
Very easy to install and didn't have to buy an aftermarket cover.
Took me 10 minutes to install and works great
Nice intake for the price
Keeps the oil off the timing cover. exactly what I needed.
Sweet! Took about 30 minutes and I was test riding! Very happy with the intake.
I installed one on my wifes sporty and saw a major change. So when i purchased my 2013 limited i installed a big sucker on it to get it breathing. easy install and quick.
Gotta l!ove it
Great finishing just in Chrome by the guys at Arlen Ness. Don't waste your $$$ on a Harley Stage 1 cause they aren't finished and you'll pay a lot more.
Super easy install, fit right into place, was able to use the stock (custom painted) cover I have with NO MODIFICATIONS.
Easy to install and looks great!
opens up the airflow and makes it breath, easy to install!
Easy to install & it works as advertised. Everything that I have purchased from JP is of top quality & install is easy too!
Bought this kit for my 2012 flhtcu and it was awesome. Bolted right on stock cover worked good. However, I have since replaced my 2012 flh with a 2015 ultra limited low. The back plate and filter assembly all went on the new bike quite well. However when it comes to the newer style air cover cleaner its a no go. The stock air cleaner bracket won't fit flush against the top of the filter. I had to modify the bracket by cutting a half circle out of the bracket so it would bolt up. It seems to work fine now. So in short. WILL NOT WORK with a stock 2015 air cleaner cover or probably a 2014 stock air cleaner cover. And yes the J&P site says it will. Wrong
2014 Ultra Limited owners. You CAN NOT use your stock AC cover with this big sucker.
Look good on my streetglide and very affordable. .Sales people were very helpful
They sound great easy to install
Extremely Satisfied. Thank you.
An excellent AC. It's definitely worth the price. It gave my 2012 HD Dyna Switchback a noticeable increase in horsepower.
Great breather and a really good price.
Great breather and a really good price.