Due to vendor restrictions this product does not qualify for this offer.
OEM Reference: 60619-70
Sold in Units: Each
|Electra Glide Anniversary FLH : 1978|
|Electra Glide Classic FLHC : 1979–1981|
|Electra Glide Classic Side Car FLHCE : 1979–1981|
|Electra Glide Fat Bob FLHFB : 1970|
|Electra Glide FLB : 1970|
|Electra Glide FLBF : 1970|
|Electra Glide FLH : 1970–1978, 1981|
|Electra Glide FLH-74 : 1980|
|Electra Glide FLH-80 : 1978–1980|
|Electra Glide FLHB : 1970|
|Electra Glide FLHF : 1970–1975|
|Electra Glide Heritage FLH : 1981|
|Electra Glide Police FLHP : 1981|
|Electra Glide Police FLHP-74 : 1979–1980|
|Electra Glide Police FLHP-80 : 1979–1980|
|Electra Glide Police FLP : 1971–1972, 1974–1975|
|Electra Glide Police FLPF : 1971–1972|
|Electra Glide Sport FLHS : 1977, 1980–1981|
|Touring Electra Glide Classic FLHC : 1982|
|Touring Electra Glide FLH : 1982–1984|
|Touring Electra Glide Special Edition FLHX : 1984|
|Touring Electra Glide Sport FLHS : 1982–1983|
As always, J&P shipped fast and it was well wrapped. So I give J&P 5 stars. Other than that, this is a piece of crap. The casting is poor, the chrome is worse, Had to put an insert in for one of the starter motor studs. The holes for the outer primary cover all had to be retapped (expected that). 4 of the holes did not line up with the stock outer primary and had to be filled and re drilled and tapped.
Products came very fast.
I have a 1980 FLH with belt drive like the other review side so I got it all together to find out the screw holes didn't match up with the stock outer cove and the screws were smaller then the stock one's so I had to fix the hole's the best I could and tap to make it work. P.S Check it to see if it will work before you grind on if.
Fits the 77 shovel wonderful. Changed over to a drive belt 1 1/2" and had to do some shaving on the inside to make it work. Still no biggie looks good! If I were to leave it wet, woulda worked just fine
Email A Friend
Select Your Motorcycle