• This module triples your visibility in the rear
• Converts Rear Turn Signals to Run-Brake-Turn
• Works with LEDs or Incandescent Bulbs
• Choice of 10 User Selectable Built In Brake Light Strobe/Flash Patterns (User can also select no Strobe/Flash on Brake)
Pattern 0: Four Flashes then Solid (Incandescent or LED)
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 2: Seven Flashes then Solid (Incandescent or LED)
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only)
Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid (LED Only)
Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only)
Pattern 8: Max Strobe 4 Seconds, Solid (LED Only)
Pattern 9: Constant Max Strobe Pattern (LED Only)
• Ability to apply Brake Strobe/Flash Patterns on Center Taillight only, Rear Turns Only, or Rear Turns & Center Taillight
• SMART Function - If Brake Strobe/Flash is Turned On, Strobe/Flashing will be paused on Turn Signal if Simultaneous Braking and Turning
• 10 User Selectable Running Light Intensities Allow User to Match the Running Light Brightness of Turns to Center Taillight
• Built In Short Circuit Protection
• Sealed, Weather Tight Case
• Slim Line Design: 4.2″ x 1.4″ x 0.6″.
• 5-Year manufacturer's warranty
Note: The use of this product requires a Signal Stabilizer or Load Equalizer on some Softail models.
Note: If your bike is equipped with an alarm AND a Signal Stabilizer is not used, a Alarm Friendly Load Equalizer is Required. Custom Dynamics recommends the use of a Signal Stabilizer over a Load Equalizer.