Chopper Style Gas Tank Lift Kit
- Product Reviews
- Catalog Pages
Chopper Style Gas Tank Lift Kit
Fitment Note: Once installed all clearances must be checked before operating motorcycle. Brake lines, throttle/clutch cables and turn signals may need to be adjusted or relocated before riding.• An easy to bolt-on bracket that allows you to raise the front of your gas tank off the frame• It gives your bike the appearance that the frame was chopped and stretched• It allows easy access to clean and polish your rocker covers, plus allows better air flow, heat dissipation and promotes better cooling over the top of your V-TWIN air cooled engine• Each bracket is precision made and powder coated for durability and includes all the necessary hardware and easy to follow installation instructions• 3″ lift kit
|Finish:||Powder Coated||Sold in Units:||Kit|
Fitment Note: Once installed all clearances must be checked before operating motorcycle. Brake lines, throttle/clutch cables and turn signals may need to be adjusted or relocated before riding.
- Dyna Fat Bob CVO FXDFSE : 2009
- Dyna Fat Bob CVO FXDFSE2 : 2010
- Dyna Fat Bob FXDF : 2008–2014
- Dyna Low Rider Convertible FXDS : 1997–2000
- Dyna Low Rider EFI FXDLI : 2005–2006
- Dyna Low Rider FXDL : 1997–2005, 2007–2011
- Dyna Street Bob EFI FXDBI : 2006
- Dyna Street Bob FXDB : 2007–2014
- Dyna Street Bob FXDBP : 2014
- Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006
- Dyna Super Glide Custom EFI FXDCI : 2005–2006
- Dyna Super Glide Custom FXDC : 2005, 2007–2014
- Dyna Super Glide Custom FXDC Anniversary : 2013
- Dyna Super Glide CVO FXDSE2 : 2008
- Dyna Super Glide EFI FXDI : 2005–2006
- Dyna Super Glide FXD : 1997–2005, 2007–2010
- Dyna Super Glide Police FXDP : 2004
- Dyna Super Glide Sport EFI FXDXI : 2005
- Dyna Super Glide Sport FXDX : 1999–2005
- Dyna Super Glide T-Sport FXDXT : 2001–2003
- Dyna Switchback FLD : 2012–2014
- Dyna Wide Glide FXDWG : 2008, 2010–2014
efreundner Posted :
Easy to install andlooks great. Didn't drain the tank so had a little fuel spill, but not too bad.
rebelbob6901 Posted :
Excellent choice, lifted tank on my Low Rider and looks great. Just repainted bike and installed lift kit and have gotten a lot of good comments from the looks once installed. Some thought 3" was going to be too high but after seeing on the bike with Batwing Fairing they like the look. Highly recommend, also more air flow to jugs and easier to clean top of motor.
siva Posted :
Rickt4675 Posted :
robertt266 Posted :
Great product, Fast delivery. Thank you!
BNBuzzard Posted :
Nice product. Looks great on my 09 fxd.
03fxd Posted :
Looks great on my 2003 dyna
auclairn Posted :
okay for what it does
2000 Dyna Convertible Posted :
I love the new look since putting on my tank lift kit.
toxicsean Posted :
Digging the look!!! Fuel gauge is outa wack. (Already knew it would be duh) minutes to install!!!
gatorlaw Posted :
Easy install. Lifts tank off of engine and allows you to see the entire engine, get some rockerbolt covers though as you'll need them!
johnnyquinn Posted :
This looks awesome! Great product.
RRRICHARDSJR Posted :
This was fairly easy job but of course there are always some surprises. The fuel crossover line between tanks and vent lines both had to be replaced with longer lines. Fuel gauge is now a little off also, and I’m working on a solution for the gauge problem, hence the 4 star rating instead of a five, over all I like the subtle finished look the kit provides my bike, FL101vetbuzzard.
timmyschwag Posted :
Easy to install. May remove it though, a 2" may be better for the look that I want. However, it looks great on other dynas that I've seen. Just doesn't go with my bars (14" apes) and my general look. Still giving it 5 stars because its just a personal thing and it is built well and installs easily :)
gvpendergraft Posted :
Messes with the fuel gauge a bit due to the height increase, but makes the bike look really good, runs cooler, and allows for easier cleaning.
effx Posted :
Works awesome! Adds a smoother line with the 4" lift...great products, easy to use since I was able to wedge it in without having to cut my tank fuel line...Two people make this a 15-20 min. max job.
firstname.lastname@example.org Posted :
Makes it a whole lot easier to clean the top of the Engine. Looks nicer too.
N-gin Posted :
As expected Kit comes with exerything you need to do the job right. Basic hose clamps and correct hose. Metal is thick, good paint. Paint held up the first time I tightened everything up. About 6 months later I had to take it off and reinstall, the paint did crack a little but did not expose any raw metal. Looked like it had some other coating under the top layer. Fit and finish is good. You must dry the hardware well after you wash your bike or you will have very light rust staining the bolts.
opey barr Posted :
Well built and complete kit. I'd like to see more heights available. Gives the bike a nice line.
kiwiGibbo Posted :
love it, looks good and makes the bike look good, make sure your tanks in good shape though as mine because of the angle its on, started leaking fuel from the wlds at the back of the tank, had to treat it with a POR 15 tank kit all sweet now.
wlddogmp Posted :
THIS KIT IS AWESOME. This is the first review Ive ever written because I never felt the need but no other part has done so much to give my bike the look I want as this one has. The parts themselves are very high quality and very easy to install. No other part has improved the look of my bike for such a small price. I just cant express enough how happy I am with it.
lnchrchf31 Posted :
Very complete and easy to use kit. The results are a complement to any bike for that chopper-look much easier to get to the rocker boxes without taking off the tank.
pokerstar Posted :
does not work good with pull back handlebar risers. handlebars very close to tank
fhsmct Posted :
Love it. Practical and enhances the look of my bike. Makes cleaning the top of my engine much easier . . .
raschueman Posted :
it was easy to install. lifted the tank and gave the bike a cool look.
bb_the_wildchild Posted :
The tank extension I purchashed for my 2001 FXDWG, has by far been the best modification I have done to it so far. It has really helped keep the engine cool and cleaning the motor is so much easier.
dfurente Posted :
When I changed my stock FXD handlebars to streetslammers with risers. The handlebars looked like antlers to me. Basically, it didnt have a smooth transition from the tank to the bars. This tank lift did just that, gave a nice smooth transition from the tank to the bars. Friends have commented the same opinion to me as well.
dfurente Posted :
I did a lot of comparing before I purchased this light. My conclusion was that this was a good quality purchase while at the same time it is inexpensive compared to some other name brands. If you're looking for something that does the job and looks great. This is a good choice.
wesleyj Posted :
After purchasing a slightly longer Crossover Fuel Line, this 3" Tank Lift Kit was easily installed on my 2001 Harley T-Sport (FXDXT).
pfunk03103 Posted :
I just purchased the 3" tank lift kit for my 2000 Harley Super-Glide. What a difference in appearence. It has a real chopped look to it. All I have to say is if you purchase this part don't forget to empty your tank because clean-up sucks! Definitley a part you want!
Chopper Style Gas Tank Lift Kit?
Our customer service has the answer.