Due to vendor restrictions this product does not qualify for this offer.
Free Ground Shipping
J&P Part: 750-221
Fitment Note: Must use correct Memphis Shades Trigger Lock mounting hardware for your model bike.
This product was proudly made in the USA
Detach Type: Yes
Headlight Cutout Diameter: 7"
Manufacturer Part Number: MEM3411
Material: ICI Lucite Acrylic
Mount Location: Forks
Product Color: Gradient Black
Sold in Units: Each
Thickness: 4.5 MM
What's the right height windshield for me?
When seated in your normal riding position, the top of the windshield should be level with the tip of your nose. When you ride in the rain, you will still have an unobstructed view of the road, and the windhshield will still be tall enouguh to deflect air over and around your head.
The cut out for the headlight is a little high but other than that it seems to be a good product.Make my bike look a little better.I would reckomend it to a freind.
I installed a Memphis Shades Batwing on my 08 Road King a while ago and loved it (YouTube "Memphis Shades Batwing Install on Harley Road king") So I thought I'd go again with Memphis Shades for my Fatty. Installed it the night before we (the long suffering missus & I) headed off to a gathering a few hundred Km's away. The morning we left was a full storm - tail end of a cyclone, high winds, no daylight, black skies and driving rain. The wind shield was great, kept the rain off us both - well, the top half at least. Only stopped twice to rinse the crap off the windshield with clean water and a wipe down. The following day was beautiful and stayed bug free. There's a little buffeting with an open face helmet but that could be eliminated with lowers if you felt the need - or just harden up. Easy on and easy off - Good value for the money.
A really nice windshield and easy to install.
Love it can't wait for the weather to improve in Michigan so I can try it out. Thank you very much.
Great windshield and great service!
I had to remove my fork wind deflectors to install windshield mounting brackets.
fits the shadow 1100 very well and looks good too
Excellent windshield that looks and performs great.
The tint on the windshield blisters/bubbles after 6-months. Not Good.
Good product,looks great on the bike. Almost a perfect replacement for the OEM shield on my FLSTC, but it is about 1/2 inch shorter and it had to be attached with the quick disconect system. For me this was no problem as my stock mount and hardware was in sad shape. If you're looking for a great looking shield and you want a touch of custom this is your shield.
Installed this with the quick change kit. Fit's really tight if you have the OEM light bar installed. But with some work it fits. Take care around the light bar. I suggest you cover the lights with a soft rag to keep from screwing the new shield up. Looks great and is the right height(21")for replacement of OEM shield on a FLSTC.
The windshield looks good, but I find there to be more wind getting around and to me than [with] the Harley windshield, (that was actually slimmer). Good thickness of the windshield and the gradient black looks good. I keep it clean but the windshield appears to scratch easily, as I have a couple small scratches already.