Due to vendor restrictions this product does not qualify for this offer.
This product was proudly made in the USA
|Dyna Low Rider Convertible FXDS-CONV : 1994–2000|
|Dyna Low Rider EFI FXDLI : 2005|
|Dyna Low Rider FXDL : 1993–2005, 2007–2015|
|Dyna Super Glide 35th Anniversary EFI FXDI35 : 2006|
|Dyna Super Glide Custom EFI FXDCI : 2005|
|Dyna Super Glide Custom FXDC : 2005|
|Dyna Super Glide EFI FXDI : 2005–2006|
|Dyna Super Glide FXD : 1995–2005, 2007–2010|
|Dyna Super Glide Police FXDP : 2001–2004|
|Dyna Super Glide Sport EFI FXDXI : 2005|
|Dyna Super Glide Sport FXDX : 2000–2005|
|Dyna Super Glide T-Sport FXDXT : 2001–2003|
|Dyna Wide Glide CVO FXDWG2 : 2001|
|Dyna Wide Glide CVO FXDWG3 : 2002|
|Dyna Wide Glide EFI FXDWGI : 2005|
|Dyna Wide Glide FXDWG : 1993–2005|
|Softail Bad Boy FXSTSB : 1995–1997|
|Softail Custom FXSTC : 1984–1999, 2007–2010|
|Softail Deuce CVO FXSTDSE : 2003|
|Softail Deuce CVO FXSTDSE2 : 2004|
|Softail Deuce EFI FXSTDI : 2001–2006|
|Softail Deuce FXSTD : 2000–2007|
|Softail Fat Boy Anniversary FLSTF : 2013|
|Softail Fat Boy FLSTF : 1990–2014|
|Softail Fat Boy Lo Anniversary FLSTFB : 2013|
|Softail Fat Boy Lo FLSTFB : 2010–2014|
|Softail Heritage Springer FLSTS : 1997–2003|
|Softail Rocker C FXCWC : 2008–2011|
|Softail Rocker FXCW : 2008–2009|
|Softail Springer EFI FXSTSI : 2001–2006|
|Softail Springer FXSTS : 1988–2006|
|Softail Standard EFI FXSTI : 2001–2006|
|Softail Standard FXST : 1984–1990, 1999–2009|
|Sportster 1000 Electric Start XLH1000 : 1985|
|Sportster 1000 Roadster XLS1000 : 1983, 1985|
|Sportster 1000 XR-1000 : 1983–1984|
|Sportster 1100 Electric Start Anniversary XLH1100 : 1987|
|Sportster 1100 Electric Start XLH1100 : 1986–1987|
|Sportster 1200 Custom XLH1200C : 1996–2003|
|Sportster 1200 Sport XLH1200S : 1996–2003|
|Sportster 1200 Standard XLH1200 : 1988–2003|
|Sportster 883 Custom XLH883C : 1999–2003|
|Sportster 883 Deluxe XLH883 : 1988–1995|
|Sportster 883 Hugger XLH883 : 1988–2003|
|Sportster 883 Roadster XLH883R : 2003|
|Sportster 883 Standard XLH883 : 1987–1991, 1993–2003|
|Super Glide Custom FXRC : 1985|
|Super Glide Disc Glide FXRDG : 1984|
|Super Glide FXR : 1986–1994|
|Super Glide FXR2 : 1999|
|Super Glide FXR3 : 1999|
|Super Glide FXR4 : 2000|
|Super Glide Grand Touring FXRD : 1986|
|Super Glide II FXR : 1982–1985|
|Super Glide Low Rider Anniversary FXRS : 1988|
|Super Glide Low Rider Convertible FXRS-CONV : 1989–1993|
|Super Glide Low Rider Custom Anniversary FXLR : 1987|
|Super Glide Low Rider Custom FXLR : 1987–1994|
|Super Glide Low Rider FXRS : 1982–1991|
|Super Glide Low Rider Sport FXRS-SP : 1987–1993|
|Super Glide Police FXRP : 1984–1994|
This was easy to install, but the plastic screws break easily. Also, I am not sure it helps all that much keeping my hands warm.
The deflectors are the best I have ever seen around. They do what they are suppose to and they look great. I was looking around for them and was not able to find them, until now. The price is well worth the item.
These work very well. The only problem I have had is that I have had to remove my 12 inch leather fringe from the handlebars as the wind tangles them up. I do like the wind protection though.
If these deflectors were an inch or so wider, the wind would be truly deflected from the hands. These deflectors are not cutting the wind like I expected. In addition, the cheap plastic panhead screws supplied to connect the deflectors to the bracket are completely worthless. National should have supplied quality chrome bolts.
I'm satisfied with how they block the wind, but there are a couple issues I think could be improved. 1. Plastic screws - should be chrome even if price needs to be increased a couple dollars. 2. When using on a bike with handlebar mounted turn signals, a new directional retainer must be bought. A washer and flathead screw are provided to attach the retainer and turn signal. When using the washer (3/16" thick) the screw isn't long enough. When not using the washer the retainer won't tighten against the bracket, so you'll need to find a washer around 1/8" thick. 3. They rub against the windshield a bit. With a few design improvements these could be a very nice product. As they are, I'll probably take them back off and leave them sit in the garage.
The wind deflectors themselves are a nice product. The problem is with the hardware. The bolts that mount the deflectors to the mounts are plastic and very poor quality. After breaking 2 when trying to install the deflectors, I finally tossed them out , went to my local hardware store and bought chrome 1/4" bolts and acorn nuts and finished the installation. Now they're installed right and look good.
These deflectors fit well on my 2008 Road King. They do a great job of blocking the wind and I can ride on cold days without heated grips or heated gloves. Several people told me they look good on the bike, too. The install took about 10 minutes. Great for cold temps. I may leave them on in the summer since I ride in the rain a lot,too.
this I should have got a while ago love them
great product. but you will probobly have to spend another buck or 2 for new metal screws
The hand deflectors work great in the cold Utah area.
Easy install but the plastic bolts need an upgrade.
better and less expensive than a fairing for protecting the hands from rain and wind.
Simple to install and do what they are supposed to.
They work great. Just went on a 100 mile 5 hour mountain ride at temps between 28 and 38 degrees and although I could feel the cold my hands were comfortable in thin insulated gloves without heaters or heated grips.
Plactic bolts came off on the clutch side. They are cheaply made. Is it possible to replace the one bolt and nut.
These hand deflectors perform just as the description says they do--they do a great job of blocking the wind from your hands. I was torn between heated gloves and these deflectors, and I'm glad I chose the deflectors. The more I though about it, the more I realized that the wind will eventually get to all gloves. And with electric gloves, you've got the wiring harness to fight with. So, why not address the problem at its source--the wind. Some other reviews that I read complained about a couple of plastic bolts that come with the deflectors, but I had no problem with them. Just don't overtighten. Installation takes about ten minutes. They're easy to put on and take off. So, it's not a hastle to remove them for warm weather.
excellent product, plastic mounting bolts are junk though - just buy some stainless ones
Easy to install, though mine were short one lock washer. Work great, though I notice a little bit of buffeting behind my Road King windshield that wasn't present previously. Not enough to not use them, though, as they are very effective on a cold day.
they were simple to install and they work great !
Have not put them on my bike...They are a lot larger than they look in pictures.
Really work Great, stops the rain from hitting my hands. Helps me not ot have to have a full faring or full windshield.
Easy to install, Worked great. Would have been a 5 but was missing a screw out of the package.
Easy to install, Worked great. Would have been a 5 but was missing a screw out of the package.
These went on in about 10 minutes and work great keeping wind and bugs off my hands. So far, everybody agrees they look good on bike too!! And WAY cheaper than buying a fairing. A+
Really enjoy the product. It looks great on the bike and most of all it really helps to keep my hand warm on cold rides and dry during wet weather. Highly recommended.
These deflectors are excellent for cold weather riding. They definetly keep yours hands warmer. Wish I had them last winter!
fits nice, looks good, provides decent protection
Well worth getting.
good fit easy to install
They work well but could be better if they came in a clear color. They don't match my windshield.
helps keep wind off fingers
Just what the Dr. ordered as far as I'm concerned ! :)
do exactly what they r made 4 & r easy on the eye.
Installed these on my V Star 650 Custom. They seem to do their job, but I'm not crazy about the looks of them. I installed them ABOVE the nut on the mirror mount bolt because they were down too low to actually deflect the wind the way the instructions say to mount them. But that was a simple adjustment. FYI - I have pullback risers on my bike and I think without some type of handlebar riser installed these hand guards could hit the tank if the bars are turned hard to either side.
Mounting position is a little low to be completely effective.
good quality for the price, chin strap and padding could be better
They work great on the wife's bike. Keeps the wind and bugs off the hands.....
Good quality item. Perfectly fits my bike
great for keeping hands protected from wind and bugs. Easy to install.
These are great - really heavy duty "plastic". I was thinking about getting heated gloves but don't need to now.
These saved my hands in the winter.
It is amazing how much difference these little hand deflector shields make in the cold and especially the rain. love them!
pretty good item
Very easy installation (for me that's saying alot). Comes in real handy on cold/windy days.
The connection arms have to be bent to adjust to the height of your hands, otherwise a very great product
Fit well and work great, they also look good on the bike.
Easy to install. Kept hands much warmer in colder weather than without (installed about a week ago and rode in 32 deg weather). Was worth the cost.
do exacly what they r made 4 & r easy on the eye.
These units were easy to install. Save for a bit of nervous bracket bending to clear the throttle cables ,and to align the left, and right hand deflectors to each other for a good angle. They sure help to keep my old hands warmer.I'm not too sure about the plastic nut/bolt program. Better to break in a fall,than tear your hands up I guess.
Email A Friend
Select Your Motorcycle