World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!

Menu

Celebrate Sturgis. Buy Now.
Celebrate Sturgis. Buy Now.

Kuryakyn Plug-N-Play Removable Backrest Bracket

Kuryakyn Plug-N-Play Removable Backrest Bracket
Product may vary from photo(s).

$169.19 Save 10%! Regularly: $187.99

Free Ground Shipping

26 Reviews

– Order in the next to ship today

J&P Part: 820-077 On Sale!

Description

Kuryakyn Plug-N-Play Removable Backrest Bracket

Fitment Note: use FXR/FXD bar .

• The Kuryakyn Plug-N-Play Removable Backrest Bracket allows you to easily and quickly add a backrest for your passenger's comfort

• The Plug-N-Play Backrest Bracket uses pre-drilled factory holes for easy installation (Note: certain Harley-Davidson models require drilling an additional hole in the fender behind the rider's seat)

• The mounted bracket will accept the Kuryakyn Low Custom Sissy Bar 850-171 with Backrest Pad 850-172 each available for separate purchase

• The Kuryakyn Custom Sissy Bar with Backrest Pad measures 6-1/2" wide X 9-1/2" tall from the rear fender

Product Specs

Finish: Chrome

Manufacturer Part Number: 8998

Sold in Units: Each

Fitment

Fitment Note: use FXR/FXD bar .

Customer Reviews

Overall Rating:
5/5 based on 26 ratings

5 by

had some small modification to do with the bracket but not much just file out the mounting holes a bit bigger so it would fit my HD breakout also you will need to change the mounting bolts for longer ones as the stock ones are not long enough to incorperate the mounting bracket longer bolts not supplied and i would normally have some lying around but unfortunitaly i was out of luck i had to go to the hardware store and buy some but all in all it is by far a much nicer and descreat bracket than the standard big bulkey ones that everyone else seems to have its a good solid piece but you can still make some minor difference on the radius to fit the curve of your rear fendor if you need to very happy with the service from J&P i go to them for everything

5 by

Looks great and fits perfect

5 by

The back rest is very easy to install and to remove.

5 by

Great product,very solid. Fast shipping

5 by

Wifey loves it! Looks great! I love that it comes off easy along with the rest of the plug-n-play system. This sure beats the old strut brackets! I run it with a two piece seat...

5 by

This is a great product, heavy steel, well made and finished. Fits the quick change fender plates as advertised. Great option over a typical sissy bar set up.

5 by

Great heavy duty product that works well

5 by

Great

4 by

Do not buy this if you own a Softail Deuce. Despite using the product filter on this web site the product still comes up as an option. It will not fit, the screw holes do not line up. The product is well made, very sturdy, and I bet I would have loved it if it actually fit on my bike. Therefore, four stars for quality workmanship and the idea. It just doesn't fit on the Deuce (a concept I am finding myself having to deal with very often). :-)

5 by

works great.

5 by

love it

5 by

works perfectly

5 by

Very heavy duty, fit custom fender perfectly. Did add a couple of screws to rear for added security as is permenatly mounted. Should include mounting hardware for the cost.

5 by

I just received this for my 01 Sporters 1200C and it fit perfectly and looks great! I can't wait to get my sissy bar and backrest which was back ordered. Thank you J& P Cycles!

3 by

I have a Carefree Custom. I ordered the Harley version because it was the only one in stock. I needed something quik to quiet the rear-end noise down (wife that is). It fits my custom fender fine. No hardware is a pain but all you need to find is 2 1" dome screws. Like the one holding your seat on. It installed so easy I was skeptical about it. We didn't go a block before the wife said it was worth every penny! Thanks J&P! TRE Marana, AZ

5 by

The removable bracket, and back rest fit very well, and installed easily to my 1976 HD Shovelhead. I like the looks of the product, and the steardiness of the whole setup. p.s. all other products ordered from you in the past, I've been very pleased with.Thank you J&P Cycles, for coming through for me everytime. Dana Joslin

5 by

The removable backrest bracket was very easy to install. No adjustments to the bike necessary.

2 by

Although the sissy bar bracket is well built and very sturdy I did have a couple of problems with it. First (and least importantly) the piece did not come with any mounting bolts or washers. One would think the back end uses the screw used to bolt the seat down, but you need a longer bolt to tie it down securely. One was not supplied. Also, the front of the plate needs to be bolted down, and there was no bolt included for that. i had a couple appropriate bolt laying around (you need washers also, so I was okay. However, if I didn't I would have had to hit the hardware store just to put the thing on. Also, and more importantly... the thing comes with a rubber piece which buffers the chrome bracket from your paint on your fender. They say it will not scratch. I made certain there was no dirt or any substance on the rubber and cleaned and waxed my fender before mounting the bracket. When I took it off to go solo, I noticed fine abrasions on my fender in the silhouette of the rubber piece. It did scrat

4 by

The only sissy bar mounts I've found to be used with my leather saddle bags #90342-04 on my Sportster. You can easily take on and off.

5 by

This is a great product my wife and kids sure enjoy. thnx

4 by

Just what I was looking for. Looks good, quality good, easy on and off.

3 by

Quality is good, although it comes with no hardware. Looks ok, but I guess thats why it's easily removable....so far seems to work well, ol' lady likes it, dosen't have to hold on for life anymore.

Load More Reviews
Fast Free Shipping on Orders at $99.99 & Over
Free Tech
Support
Largest
Selection
120 Day
Returns
Live Help

Get Help From Our Industry Experts

Call Us 24/7 1-800-318-4823

Help / FAQs