Due to vendor restrictions this product does not qualify for this offer.
Sold in Units: Set
|Softail Deluxe CVO FLSTNSE : 2014|
|Softail Deluxe EFI FLSTNI : 2005–2006|
|Softail Deluxe FLSTN : 2006–2014|
|Softail Fat Boy CVO FLSTFSE : 2005|
|Softail Fat Boy EFI FLSTFI : 2001–2006|
|Softail Fat Boy FLSTF : 2000–2006|
|Softail Heritage Classic Anniversary FLSTC : 2013|
|Softail Heritage Classic EFI FLSTCI : 2001–2006|
|Softail Heritage Classic FLSTC : 2000–2014|
|Softail Heritage EFI FLSTI : 2006|
|Softail Heritage FLST : 2006, 2008–2009|
|Softail Heritage Springer Classic EFI FLSTSCI : 2005–2006|
|Softail Heritage Springer Classic FLSTSC : 2005–2007|
|Softail Heritage Springer EFI FLSTSI : 2001–2003|
|Softail Heritage Springer FLSTS : 2000–2003|
|Softail Night Train EFI FXSTBI : 2001–2005|
|Softail Night Train FXSTB : 2000–2005|
|Softail Springer EFI FXSTSI : 2001–2005|
|Softail Springer FXSTS : 2000–2005|
|Softail Standard EFI FXSTI : 2001–2005|
|Softail Standard FXST : 2000–2005|
they look good but they do not fit, unless i am doing something wrong but they are too small to mount where the sissy bar attaches
Just as ordered, I will not use as described, I am making a set of bags and these will be a built in bracket.
just what I expected great price for product
Good Quality but bolts too short to mount with existing sissy
Exactly what I needed, the fit was perfect.
Great product and service as always. I did return this order because we sold the bike before it arrived.
Holes do not line up. I'm going to have bend them to make them work.
They fit perfect
No problem with bolts being short or having to ream out the holes. The right side support needs a different configuration on it, my saddlebag still hits the swingarm.
Left side support is perfect, right side needs a few more degrees added so the saddle bag will clear the swingarm.
The quality of this product is very nice. But, I had to cut one side down to allow it to fit. the bolts were not long enough to go thru them. All in all a good product.
Product looks good, but the bolts supplied are too short.
I have a few complaints about these brackets. Most importantly, they won't work with my bags. They're just too small. I installed them, threw my Langlitz throw over saddlebags on and the supports barely touched the bags! The bags still rub against the swingarm! Now, compare these to the '04 Sportster brackets I bought at the same time (8400075). The Sportster ones are 2" longer and 1 1/2" wider, and the bar itself is 1/2" diameter, as opposed to these (3/8"). Second is a cosmetic problem: the bolts are your standard hardware supply store hex bolts (not hex as in you need a hex key, but rather a socket to tighten them). Hardly the look I want. Compare this to the bolts you get on the Sportster kit - nice round-headed bolt (mostly - hex key, not torx) match the rest of the bolts on the bike. Still a lot better than these ugly ones. Third, as stated in another comment, one of the bolts won't fit through the support. You'll have to ream out one bolt hole. Or, if you have bolts lying around like I did, just use one of those. (Or buy one from your nearest hardware store.)
Brackets worked good with the bags. Had to ream out one bolt hole on the mount.
I was very satisfied with my purchase and the items I bought looked like top quality. They were everything I expected and I will by more things for my bike from J&P Cycles in the future. Thanks.