World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!


J&P Cycles® License Frame and Backing Plate Set

Product may vary from photo(s).

Everyday Low Price: $21.99

Gold Club Price: What's This? The Gold Club is our premier membership program. For most items members receive 10% off every day, plus exclusive sales and benefits just for members. More Info $19.79

J&P Part: 9700105

Rating: Read Reviews


J&P Cycles® License Frame and Backing Plate Set

• Complete kit with frame and backing plate, has all-stainless hardware - a set of four bolts, acorn nuts and lock washers

• Fits 4″ x 7″ license plates

Product Specs

  • Finish: Chrome
  • Sold in Units: Kit


Note: This item is a universal/custom fit component, and does not have any direct standard/OEM model application. Some items may require modification and an advanced level of mechanical skill and/or knowledge for installation.

Customer Reviews

 win.jerry Posted:

Perfect fit. Nice quality.

 eking70 Posted:

Awesome! Looks Great!

 loki2649 Posted:


 Marcojim Posted:

quick shipping....very satisfied

 yzergod Posted:

Unless you need the backing plate specifically, save your money and just buy the frame (J&P has it alone for $6.99). I needed the frame as it has the smallest profile J&P offers. I thought the hardware would be nice to go along with it, but it is junk.

 Ashdharma Posted:

Great product with a great look.

 jwinker Posted:

It's chrome and it's a license plate holder. It does both of those jobs very well. If you want something that is not chrome and/or not a license plate holder, this product is not for you.

 raffycastro Posted:

Clean. Good quality chrome. Installs in a couple minutes. Improves the look of the bike 10 fold.

 Bilco5223 Posted:

fits great and looks awesome.

 kbican Posted:

very happy with this plate.

 ocylent Posted:

looks great , fit good , but I doubt the acorn nuts will stay on. I replaced them with nylocks. I hate it when my plate falls off.

 dakotah64 Posted:

This is a great product. Very good quality. Dressed up my plate with out going overboard.

 spetzke Posted:

Looks great installed- nice, solid, well-constructed piece. Definitely worth the money.

 doescherr Posted:

This is a really nice unit and looks great on the bike. One of those little touches that make a big difference. fit perfect!

 opharley Posted:

Looks great on the bike!

 Karrowack Posted:

Very nice!

 wurthless Posted:

nice beefy piece, looks great Posted:

does the job and the price is rite

 anderleka Posted:

Nice product

 rworra1 Posted:

Always a great buying experience!

 bdyal1972 Posted:

excellent works very well

 flyboy1baker Posted:

very nice item great deal for the money, very satisfied with the service and quick delivery.

 2010*macdaddy Posted:

good product for price

 jescott27 Posted:

Great product, but the included bolts aren't long enough to mount the plates to the bracket on my bike. I ended up having to replace them, and the acorn nuts wouldn't work with the longer bolts so I had to replace those too. Looks great afterwards, but definitely an extra hassle

 JCL57 Posted:

Its seems to be good, but turned out to be the wrong size. I didn't realize that bike plates come in different sizes.

 gagnspice Posted:

Very high quality chrome plating, nice rounded corners, great looking.

 magicman3283 Posted:

Perfect fit, instructions were clear and easy to follow. Looks great.

 intune Posted:

good product , shipping was quick

 8up Posted:

Good heavyduty parts.

 tinao42 Posted:

Was very happy with how fast items were problems at all

 rjsmuk Posted:

holes do NOT line up with Ontario Canadian plate, had to drill new holes in my plate to make it fit.

 andrewbober Posted:

I'm very happy with the way this looks on my 2007 Vulcan 900. It came with all the hardware needed to mount and worked right out of the box!

 mulasich Posted:

The license plate holder seems to be sturdy and well made. However, the back plate is too big to fit inside of the front plate.

 mae6765 Posted:

looks good. back plate doesn't fit very good. it is about an 1/8 in to tall

 Dynamic Dave Posted:

Excellent product, it makes the plate nice and sturdy without as much flimsy vibration and has a superior chrome finish.

 cbeaver003 Posted:

Not super nice compared to some of their other products.

 John Fru Posted:

Perfect fit for mu 2004 Vstar 650. Looks great. Fast shipping

 frwthrbkr Posted:

Great product but needed to purchase longer bolts, as specified by other reviewers. Once you install a plate, the holder and plate combo is too wide to mount with supplied bolts to the bike bracket. Other than that, the holder is sturdy and asthetically pleasing.

 combackid Posted:

Looks greata and fits well.

 meesersmom Posted:

Easy to install, good quality, and dresses up license plate.

 brittanc Posted:

Easy install. Looks great. Good fit.

 mustangman1955 Posted:

Great holder with nice chrome.

 schipper16 Posted:

Made license plate look alot better on my star.

 TScoggins Posted:

Looks & Worked great!

 cmiamt_vms Posted:

The chrome finish was good. However I found the bolts were too short to install at the OEM location on my FXST and had to buy longer bolts.

 iamfrankieb Posted:

Top Quality Chrome License Plate Frame and Backing Plate Set..

 PaulLechner Posted:

simple yet classy!

 ezbasser Posted:

Used this with the angled bracket, the lay down look really adds to the bikes lines. Great quality!

 jbjackson Posted:

Fit well.

 anthrojim Posted:

Looks nice, but the bolts it came with are not long enough

 kvrazel Posted:

Needed some longer bolts

 iraqvet05 Posted:

Quality is not bad but holes didn't match up - backing plate does not recess into the frame well and throws off the hole alignment. Also found the supplied bolts are not long enough to go thru frame, backing plate, and mounting bracket. Would recommend using threadlock on the bolts.

 sull187 Posted:

The quality of the part was excelent. Instalation was easy. Looks good on bike. Not to fussy. Looks like it was made for the bike. Would recommend this product to others.

 wrecksj Posted:

Fit perfectly...Looks great...Right price...The perfect combination

 suberjim Posted:

Just what I wanted looks good and functions.

 orangevtx Posted:

A perfect accent to clean up the look. Basic and clean looking!

 ronin59 Posted:

I actually only needed the flat backing plate from this. I work on a military base and needed a place to attach the base sticker, so I wouldn't need to place it on the bike. I drilled a hole in the slightly off center and bolted it in under my forks using a hole which was already there and not being used on my '98 Fat Boy. I will not need to dril it for my '06 Street Glide, just clamp it to the engine guard and it's premenant! Thanks!

 twowheelerbandit Posted:

Pretty good quality,. Looks great, excellent price, easy to put on. Highly recomended.

 ms1600 Posted:

Very nice product and very good value for the price. I moved my license plate and this really dressed it up. I would recommend this. Heavy construction and very nice chrome.

 douginlondon Posted:

Very smart looking plate bracket. Nice chrome back plate and bolts/acorn nuts. Not exactly the size of my plate, but a bit of drilling solved that.

 impactg Posted:

Much better quality that what I was expecting for the money I paid. Very heavy, solid piece with quality chrome. I'm very pleased.

 aortiz1974 Posted:

Looks great on my bike.

 mdiem Posted:

Very nice for the money. Looks a lot more expensive than the price would indicate. I think that the kit should include longer bolts, as the ones included are too short for my bike.

 kebean Posted:

License holder looks nice and the back plate is a very nice polished aluminum.

 phil_burrill Posted:

Chrome plating is flawless, however there are better (more expemsive) covers that have hidden hardware but for the price this can't be beat.

 rfdstu Posted:

Looks really good and easy to install. Dresses up the fender and plate nicley.

 mch647 Posted:

Great product. Easy to install and looks great.

 vttimwhite Posted:

Backing plate is super smooth and very well chromed. The frame itself is a little less rugged, but it's still OK. It finished off the tail end of my '04 Heritage Softail beautifully. I bought a 2nd one for my wife's Sportster.

Live Help

Get Help From Our Industry Experts

Call Us 24/7 1-800-318-4823

Help / FAQs