Everyday Low Price: $359.99
Gold Club Price: What's This? $323.99
J&P Part: ZA38455
This item qualifies for free ground shipping
This product has an attached note. View Product Note
This product was proudly made in the USA
Installation is pretty straight forward, it does get a bit cramped under the seat. I had to hook the battery cables up just before I slide the battery all the way into the holder. This was mounted on an 04 softail standard. Downloading the map was a breeze. However, the several options they give for downloading can be a bit confusing. Overall, I like the power commander and recommend it, the tech support is good and they respond quickly.
I wasnt to sure about the power commander at first.The harley dealer tried to steer me from it.I went ahead and bought thru JPcycles and I installed it on my 06 fatboy with sreaming eagle exhaust and breather with big city thunder baffles.The down load was very simple for the bike the installation was a little tricky do to limited room under the seat.But the end results were great the power increase was seat of the pants difference .Im very pleased with this product.Thanks JPcycles
Easy to use and makes a huge difference.
Works great, Install on 2006 FXSTI was a little tricky as far as mounting location but not impossible.
Easy to install into my '05 Fatboy. I have a 10% increase in power. Still need to tweek the MAP for high-end efficiency.
a MUST to have if you have fuel injection and you changed your pipes. much better than those racing tuners.
The power comander -3 has worked out great for me. I simply took it put of the package,installed it on my 2007 dresser, then fired it up .No adjustments needed.You can't ask for anything more than that!
Product is easy to you use.
Got it and after a little study was able to program it and so far it works good.
The PCII is the same for previous years for H-D EFI engines. Just because it has a different part number, doesn't make it specifically for the 2007 96 CI Big Twin. With that in mind, the PCII instructions for my Softail left a little to be desired. I had to do a little cutting of the ECM tray to fit the cables through. And there is no mapping for it to continue using the O2 sensors, but they do provide loop-back plugs. You have to do some searching to find the correct map on their website. And lastly, although it does have a USB cable to run the software on your laptop, you have to plug it in before installation and also snake it through to under the seat where hopefully it will stay dry.
A little tougher to fit under the seat, but with some minor alterations of the ECM box it all came together. easy to use and worked perfect. Use the Rhinehart 2:2 setting if installing True Duals by V&H
very easy to use and with the online video for installation it made it a breeze
Donny Boy Jr Posted:
Easy to work with great web site.
The product was easliy installed, easy to use, and works perfectly. I would reccommend this to anyone who does not want to pay double the price to a Harley dealer for re-mapping the EFI.
Great tuner the software is great. the PC III lets it run like a Harley should.
Power commander works well and is easy to program. Web site had what I needed
Love it now I can dial in new pipes and cams or any other set up I want added power and lessened engine temp. if only PC2 maps would work on PC3/usb but I still recomend it
Good product, works really well, and easy to program too. Made a big differance in low end throttel response. Gives bike a smoother transition from low RPM speed back up to cruise speed without having to shift back and forth so much. Not so easy to install on my bike as the directions made it out to be, but was able to get it installed and set up.
Really a great product for the M&M EFI. After I installed the Power Commander III USB myself, which was pretty easy, I took it to a local HD shop that was certified to tune it. The results were great. I ended up changing the slip ons I had, and the bike now runs amazing. Great product.
I've only had it on the bike for a short time and so far the response I've felt has been remarkable,less popping,better idle, more thrust! Didn't realize that something so small and relatively inexpensive could make so much difference.
A must if changing exhaust or breather. Noticed a difference as soon as I hit the start button!
It was a quick shipping. the power commander is working great.
It was a quick shipping. the power commander is working great.
The product is too complicated to configure to your bike. Other brands don't require the extensive programming that this one does. The module is small but the ECM connector, when coupled with the original, forms a unit that is too large to store.
Outstanding product. I would recommend this to anyone with fuel injection. Easy to use and set up.
The PC works very well on my Road King. The only complaint is that the programming instructions that came with it are sketchy. I learned more from J&P tips than from the instructions.
Easy to install; obvious increase in performance; very simple to adjust to new configurations; as a summary money well spent!
So far the power commander has performed flawlessly and with the Santee 225s I installed they have really woke up my Road King!
This is definitley the most performance you can get for $360. It also allows you to change components on a FI bike without either burning up the motor, or being taken advantage of at a dealer. It was simple to install and program and I'm no computer geek. There aren't maps to cover every possible combination so I'd recommend taking your bike to a shop with a Dynojet set up for fine tuning. This is another $200 well spent.
Really helped my husbands bike, smoothed out the engine as soon as I got all the add ons added in. Need one for my own bike now Does not need Dynoed for it to work.
Easy install and great tech surport.
Easy to install. Great support from Power Commander. Tell them the options on your bike and they will recommed a map. FLHRSE2
I installed this on my 2005 CVO. More power, and better performance than ever before.
Works great easy to install and program.
couldn't believe how much difference this little device made in the performance of my bike. Awesome dude!
The Power Commander III was installed on my bike and dyno tuned accordingly. It is working perfectly and has smoothed out the lean running condition my bike was experiencing due to Harley factory tune, It has more power and is running cooler.
Unleashes the beast in your 1600 classic
Requires Adobe Flash Player
Note: Not legal for sale or operation in the state of California. Check with the U.S. EPA and your respective state and local regulations to confirm emission compliance