Due to vendor restrictions this product does not qualify for this offer.
Manufacturer Part Number: 4709
Sold in Units: Kit
I am a novice at wrenching on my bike - returning to personalizing bikes after 40 years. Converted the incandescents to LEDS. Didn't know all the pieces I'd need for the conversion - after weeks of emailing - and finally a drive to J&P in Anamosa got the three components I needed. Techs didn't really know how these pieces all worked together ... got the right wiring combination through trial and error. Now have a ride with some nice "flash". I turned out very happy after being pretty frustrated.
WORKED PERFECT! GREAT SERVICE!
Worked like a charm to eliminate 4 way flashing after installing run-brake module. Solder it in and you're all done
A little hard to install because I had to solder the wires together. Not much room to work with but I think it was just the bikes wiring.
I haven't used this yet. I didn have to..it worked without it.
diode kit was an easy and strait forward installation. worked as advertised. also, thanks to tech support for helping me find what I needed to solve my no turn signal/flashing problem
The Diode Kit was a must on my Vulcan 800A Chopper with the Kuryakyn Bullet LED turnsignals, as with the single indicator light on the dash plaque, the power was back-feeding from one light to another, giving the hazard-light effect. The Diode Kit was a simple mod & I used the "ground" from the speedo indicator light & now the LED Bullets work perfect... THANKS, J&P! :)
Just what I needed. Didn't have to go to the electronics store to piece together something myself. Everything needed was included.
Works just exactly as indicated. Just not sure how they can get away with charging so much for something that is so simple. If I had any electrical knowledge at all I could probably save a ton of money by shopping for this kind of stuff at Radio Shack.