World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!

Menu

Enjoy Free Shipping now thru Saturday the 26th

Cobra FI2000R Fuel Processor

Product may vary from photo(s).

Everyday Low Price: $234.99

Gold Club Price: What's This? $211.49

J&P Part: ZZ40682

Rating: Read Reviews

This item qualifies for free ground shipping

Description

This product has an attached note. View Product Note

Instructions  ZZ40682.pdf

Cobra FI2000R Fuel Processor

• Nearly every fuel-injected motorcycle can benefit from the installation of the Fi2000R

• Better throttle response, no backfiring, and smoother cruising are just a few of the areas improved by the Fi2000

• When your engine has the proper air/fuel ratio metered to it, it can perform to its potential, run cooler and be a much more satisfying ride

• Comes preset for your specific model

• It is also set for your bike equipped with an aftermarket exhaust system

• This setting will enhance the performance of the entirely stock bike as well

• If you add a high-flow air filter system, you can quickly adjust your particular model because each comes with detailed instructions for making fine tuning adjustments

• The Fi2000 increases horsepower and torque by optimizing stock lean air/fuel ratios (helps cool the engine temperature as well) No confusing computer downloads to install Pre-configured from the factory for your bike and model, but easy to adjust should your specific application need it

Product Specs

  • Manufacturer Part Number: 92-1650
  • Open or Closed Loop: Open
  • Sold in Units: Each
  • With/Without 02 Sensor: Without

Fitment

Honda Models

  • 1800 Retro VTX1800R : 2003
  • 1800 Spoke VTX1800S : 2003
  • VTX1800 F VTX1800F : 2006
  • VTX1800 Neo Retro VTX1800N : 2004–2008
  • VTX1800 Retro : 2004, 2006–2007
  • VTX1800 Retro VTX1800R : 2005
  • VTX1800 Spoke : 2004
  • VTX1800 Spoke VTX1800S : 2005–2006
  • VTX1800C : 2002–2008
  • VTX1800F : 2005, 2007–2008
  • VTX1800R : 2002
  • VTX1800S : 2002

Customer Reviews

  Posted:

Out the box it took me about 20 minutes to install and back on the road. Installing this made a big difference that is very noticeable.

  Posted:

Installation takes a little more thinking. The original FI clips orientation presented a slight challenge. Once past that insatll was a breeze, Noticed a definite positive difference in overall performance with out of the box settings. great addition for the price.

  Posted:

So far so good very easy to install>

  Posted:

If you like tweaking your bike with exhausts, air cleaners etc. Then this is for you. Running around town I want a different baffle than I do on long rides. Sometimes a bro comes by and says hay try this out on your bike. Doesn't matter what it is. You can dial this Cobra in to a T in just minutes. You'll like it especially if you run EFI like I do. No mapping, needing a lap top, none of that. This is a great product.

  Posted:

Needed to add some fuel over the default setting. Bike runs great. Simple install.

  Posted:

Works Great with Vance and Hines Big Shots!!!

  Posted:

Works so far

  Posted:

works great so far

  Posted:

easy to install and easy to use.

  Posted:

plug n play n more power!!

  Posted:

The heat is now gone and it rides so much smoother! EASY INSTAL!

  Posted:

I received the product just a few days after I had order it. The programmer I ordered is the Fi2000r fuel processor. It does what it said it would do. I didn't have to do any adjustments to it because it came programmed to my bike right out of the box. I do recommend this product to anyone that has aftermarket exhaust and needs a fuel processor system for their bike.

  Posted:

the FI2000r fuel processor was just what i needed after fitting a barron stealth air kit ,the FI2000r was so easy to install like Cobra say it's just plug an play and performance has been big improvement .and you cant complain about the price best value for money as far as I am concerned,and the customer service from JPs has been great as I am ordering over the net in austrailia.Dave. Perth .Western Australia

  Posted:

Works great, eliminates backfiring and lean stock mixtures. Definitely adds power but some mechanical knowledge recommended or installation and tuning.

  Posted:

The Cobra FI2000 was very easy to install. Just plug and play. When I decided that I wanted to further tune device, it was just as easy. The directions are very easy to follow. It has really made a difference in the performance of the machine. My fuel mileage has dropped about two points, but the grin factor has increased several.

  Posted:

05-13-10 great product, easy to follow instructions 1 1/2 hour install.

  Posted:

Lots more get up and go, even though my bike ahs 30,000 miles.

  Posted:

Was bought for my nephew's Vulcan. He likes it alot.

  Posted:

Fast easy install, only 15 minutes

  Posted:

Works great, does everything it is suposed to

  Posted:

Easy to install. Did it myself in about 20 min.

  Posted:

The Fi2000 Tri port is super EZ to use, just plug & go. I didn't have to adjust at all.

  Posted:

No sweat installation and worked as advertised

  Posted:

Made a big difference in performance, but did cut down the fuel mileage by about 5 mpg.

  Posted:

This is definately an asset for my Vulcan 1700 and the installation was a snap!

Important Product Notes

Note: Not legal for sale or operation in the state of California.  Check with the U.S. EPA and your respective state and local regulations to confirm emission compliance