Vance & Hines Big Shots Staggered Exhaust System for VTX1800 R/N/T
Product may vary from photo(s).
This item qualifies for free ground shipping
Description
This product has an attached note.
View Product Note
Instructions:
ZZ47377.pdf
ZZ47377.pdf
This product was proudly made in the USA
Vance & Hines Big Shots Staggered Exhaust System for VTX1800 R/N/T
• After extensive R&D and dyno testing, Vance & Hines developed the Big Shots performance exhaust system for the VTX• These systems not only replace the excessive bulk and weight of the stock system but substantially increases horsepower and torque• Big Shots utilize the exclusive Vance & Hines Power Chamber• The Power Chamber is a unique crossover system that offers all the performance advantages of a two-into-one race system yet retains the intimidating look of drag pipes• Big Shots feature massive 2-1/2″ full coverage heat shields that make them virtually blue-proof• Includes the traditional Vance & Hines removable baffles and complete mounting hardware with easy-to-understand instructions
Shipping Note:
Additional oversized shipping charges will be applied for expedited shipments within the contiguous U.S. Shipping charges outside the contiguous U.S. are calculated by weight and dimension during checkout.
Product Specs
| Baffles Included: | Yes | Complete Header Pipe: | Complete System |
| Diameter: | 2.5″ | Exhaust System: | Dual |
| Finish: | Chrome | Head Pipe Length: | Removable Baffles |
| Header Pipe Diameter: | 1-3/4″ | Heat Shields Included: | Full Coverage Heat Shields |
| Manufacturer Part Number: | 18411 | Material: | 16-gauge Steel |
| Style: | Big Shots |
Fitment
Honda Models
- 1800 Retro VTX1800R : 2003
- VTX1800 Neo Retro VTX1800N : 2004–2008
- VTX1800 Retro : 2004, 2006–2007
- VTX1800 Retro VTX1800R : 2005
- VTX1800 Tourer : 2007–2008
- VTX1800R : 2002
Customer Reviews
Write A Product Review
LARRY@POTTEREQUIP.COM Posted :
INSTALLED ON A VTX 1800 2003 HONDA. AFTER CALLING BACK ON INSTALLTION AND TOLD THAT THEY ARE HARD TO INSTALL. I GOT MY TWO SONS TO HELP AND SPREAD THE TWO HEADER PIPES APART TO GET THEM TO GO ONTO THE HEAD. WILL NOT BUY V&H PIPES AGAIN. NEED TO HAVE A COUPLER ON FRONT HEADER PIPE WOULD HELP VERY MUCH. BUT AFTER FIGHTING TO GET INSTALLED I LIKE THE SOUND AND PERFORMANCE OF THE PIPES
Catalogs
Requires Adobe Flash Player
2012 Cruiser Catalog Vol. 10, Page 75 2011 Cruiser Catalog Vol. 9, Page 84Important Product Notes
Note: Please see U.S. EPA and your respective state and local regulations to confirm noise and emission compliance.Important Exhaust Notes:• Note: With any new exhaust, we recommend changes to carburetor jetting or use of an aftermarket fuel injection control module.• There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.• Flanges and retaining rings are not included with most aftermarket exhaust for 1984-2013 Evolution and Twin Cam models. Re-use your existing hardware, or purchase replacement hardware.
Have A Question about
Vance & Hines Big Shots Staggered Exhaust System for VTX1800 R/N/T?
Vance & Hines Big Shots Staggered Exhaust System for VTX1800 R/N/T?
Our customer service has the answer.
1-800-318-4823
Find Out More About Our:
