Everyday Low Price: $199.99
Gold Club Price: What's This? $179.99
J&P Part: ZZ70110
This item qualifies for free ground shipping
This product was proudly made in the USA
Additional oversized shipping charges will be applied for expedited shipments within the contiguous U.S. Shipping charges outside the contiguous U.S. are calculated by weight and dimension during checkout.
If your motorcycle is not listed below, please click the 'Select A Motorcycle' button above so we can find the right part.
The hole pattern didn't match. Pain in the butt
Had to elongate the top holes but great product. Easily installed
Fits like it should, easy install 10 min, an looks great what else can you say
Installed on my 05 Softail fit perfect, lined right up less than 10 minutes to install. Good quality $100 less than the Harley ones. 2nd time I have used Cobra bars.
Freeway bar fit perfect on my heritage took all of 10 min. Thanks for such good products
Bars fit correctly....I give them a 4 because the small center mount bolt was such low grade the threads stripped before it was even tight.
Bars looked great,and were very easy to install. Installed in minutes. Really added a cool look for our Vstar 250.
Performs as expected. I am a 50 y.o. woman and installed these by myself. Just need a big 'C' clamp once in place to compress the brackets and make room for the new spacers.
went on easy and looks fantastic
This highway bar saved me this summer during a little mishap. I went down ever so slowly, but fast enough to bend the bar around my leg. It saved me in words! .. I had it repaired for the summer, but did not like the integrety of the weld, so have replaced it with the same bar. I am still a new rider and learn lots and lots from friends, as well as the people I speak with at J&P. Awesome thanks much!
The bars look nice and weren't too difficult to install, however, either the lower mounting brackets should be approximately 1 1/2 - 2 inches longer or the bar should be redesigned to allow for easier shifting and breaking. As is, the foot shifter and rear brake pedal are too close to the highway bar making shifting and braking awkward.
Cobra quality and fit was excellent. Product was easy to install with no problems at all. I have bought other cobra products and have always been satisfied. J&p Cycles service was also excellent.
The bar went on the bike easily and looks great!
The bars look great on my bike and the install was easy, however, I did have to remove the exhaust system. Overall, I am happy the with purchase and the end result.
John Suhay Posted:
Upper bracket on left side did not line up well an is almost in contact with front engine cylinder head, but still looks and functions fine!
Tight fit on left side, look good.
great looking bars, a little hard to install but they were worth it
makes bike look great
great product looks great on my bike and my husbands
These things are great!!! I bought a set of these for my VT1100 Shadow Spirit and I'm loving these. So please give these a try for the money and look....
Highway bars were easy to install. Chrome finish was flawless. Very happy with this product.
Great product, high quality, it is a little tough to install on the 95to99 vt1100 ace shadow but well worth it it looks great on the bike plus it should offer protection, tip if you are installing this on a 95to99 vt1100 ace, put the top bolts, lockwasher and nut first, then do the bottom starting with left side,right side after, don't tighten anything until u have everything put together then pull the bar forward and tighten all the bolts that way it wont put pressure onthe lower radiator hose etc it is pretty tight under there but is workable, I did'nt had any trouble with the install I did'nt even scratch the bar etc.
great piece and looks great. shipping was free and arrived very quick.
Very nice looking bars.....pain in the tail to install.
Great Item, royal pain in the tail to install. Had issues with the upper bolts. Very close quarters. Ended up gluing the nuts and lock washers togather and then putting glue on my finger tip to push up inside to get the bolts to bite and finnish pulling the nut and washer togather. It worked and am very pleased with the end results
Looks great and something my bike needed
Bars look good!
Wonderful bars!! Fit great. The only problem I had was getting to the nuts to tighten them without removing the tank. I also threaded the bolt holes for added security as long as they had to be enlarged anyway.
Easy to install. I love the look and now with foot pegs added I can ride with little more comfort.
Easy to install, look great. I have already used them and they saved my tank and handlebars. That is why I bought them!!
Good stock highway bars. Nice chroming easy to install. Not crazy about having to relocate the horn to mount. Maybe should be metioned before hand that it is required.
fits perfect, didnt see the horn relocator bracket in the box until after I modified the one on the bike but it was there.
I love these! I just wished they made a rear pair to fit the '04 800 Vulcan classic.
This was a great add to my bike. The installation was very easy and bolted right on. The product was an awesome look!
This highway bar was exactly as described. Made my 2007 Vulacan really look sweet.
cobra enough said the best
They didnt fit because of modifcations i did to the bike
Great bars! Perfect fit, only took a few minutes to install.
I could not be any happier with the Cobra Freeway bars. They look great and installed in about 10 minutes.
Excellent fit and form, easy to install. These bars do not get in the way of changing your oil filter, either.
The bars were real east to install, they lined right up with the bolt holes, I had them on in 5 minutes. They look great on my C50T
Nice looking set of highway bars. Great build quality and super easy 10 minute installation.
Replaced the OEM bars that were pretty much useless. These are a great fit, good looking set of bars and the install was easy and quick.
The Cobra Freeway bar is great, instalation was relatively easy. I did have to make a little adjustment on the bottom mount point to get the bar on the bikes frame. The mounting tabs were welded an 1/16 of an inch to close to each other. No big deal.
Instructions were not very clear. But once I got the bars on I have been very happy.
Needs better installation instuctions.
VERY NICE, EASY TO INSTALL. MAKES THE BIKE LOOK A LOT NICER.
Excellent product. Not only easy to install but makes the bike look 10x better.
They look awesome on my bike!!!!! Very easy to mount.
The bars showed up yesterday by UPS. Within 30 minutes they were out of the box and on the bike without a hitch. Talk about easy and made to fit. These Bars make my bike look like they came on it from the factory. Nice job, Cobra. Thanks J&P. Dave from Oly, WA
MR. ROMAN Posted:
The item came way sooner than u expected and was packaged really well to avoid any damage. The bars made my bike loom great! I just wish I would have ordered some other things at the same time so I'd be readyto ride now!
Arrived quickly and installed without any issues.
Put these on my 1100 vstar classic silverado, fit and finish exelent, looks great !
Way nice installed it in no time at all. Thanks to J&P Cycles my Ladies Cycle is looking Sharp. JD Semper Fi
Easy install and I have mounted great highway pegs and driving lights to the bar.
These bars were very easy to mount. Wish the bar went straight across on the bottom instead of the top, but they look great!!!
Easy, easy install - Good and sturdy - Looks good too!
Easy install - Like-um
Great bar. Was easy to install took about an hour doing it by yourself.
Great looking!! Easy to install
Real nice product. Fits real close and tight. Possible too nice of fit. I wear a size 10 boot and sometimes the bar interferes when braking if I place brake pad too low on the boot.
Great addtition to my bike Was easy to install Would recommend to have a buddy help you out so you dont scratch anything
Easy to put on great fit and look.
Easy to install. Had them on the bike in about 1/2 hour
Received them with in three days of ording. They instaled in thirty minuts very easy. They make my honda vtx1300s look sharp
Wasn't able to pick up at store and take on bike so they are shipping it free to my home.
they are better than the one i ordered from another company & had to return. i'm happy with what i received.
Instructions are easy to follow and the quality is second to none. The highway bars have been on the bike for less than one month and we had extremely high winds which tipped the bike over. The bars kept the bike protected and weren't even scratched! They also look great!
Very good, sturdy highway bar. Literally had it installed in less than 10 minutes on my bike. Looks good and I haven't scuffed them yet.
Quick & easy installation
These bars are great. They look great and function great. The swept-forward design does not interfere with foot controls, and the bars will support the bike's weight. Very easy installation - excellent mounting design. Very pleased with these bars!
Fit my VT750c2 spirit to a tee
fit real great and look really classy would recommend them to anyone!!
Fairly quick to install, though not as easy as another set of bars I bought for the other bike. Had a panick brake couple of days after it was install and it held up just as designed, though.
Add some foot pegs to them and they are one of the best purchases I have ever made.
Easy to install and looks nice on the bike. Not as tall as I would like but it fulfills the intended purpose.
Very easy to install, even with my limited mechanical abilities!
Very easy to install, even with my limited mechanical abilities and looks great on my bike!
Easy to install and looks great
Requires Adobe Flash Player