Due to vendor restrictions this product does not qualify for this offer.
|VTX1300R Retro : 2004–2009|
|VTX1300S Spoke : 2003–2008|
|VTX1800C : 2002–2008|
|VTX1800R Retro : 2002–2008|
|VTX1800S Spoke : 2002–2006|
Really lights up the sides of the road to see the deer before I get to them. great product.
Really do like the Light Bar, BUT I would rather have had the switch on the LEFT side. While driving, your Right hand is full of throttle. Difficult to reach across with right hand to turn on.
I bought this lightbar for my 2007 VStar 1300. It looks good and makes my bike a lot more visible. I don't care for the turn signals being mounted off the sides of the bar, but that was the only choice I had if I wanted to purchase the lightbar from Cobra. I'm NOT mechanically-inclined at all, so I had the bar installed at my local bike shop. The mechanic said it was really easy to do. He did mention that the way the lights wire on the diagram they do not shut off when the high beam is on, so the lights stay on all the time. In PA, where I live, this is not legal for inspection.
The rack is too expensive and too large to resist only 10 pounds mx weight.
Nice item, but have too fragil conectors inside, come whith one broken and other relased.( the U connector in the bulb) I'will repaired.
Very Nice lightbar. Although I did lose bolts off it immediately on the factory assembled parts of it. Blue threadlocker fixed the issues and it is great.
Excellent product. Provided the additional lighting that I needed for riding at night.
Love my lights! Great easy to follow installation intructions. Custom made easy !!!
Not to difficult to install.. just follow instructions real closely. I love the look and much easier to see at night and to be seen by others... very much worth it!!
Don't expect quality if you go cheap. The bar's mounting bracket had to be bent for a proper fit. I was really disappointed that all the wiring is exposed and had to be wire-tied to the bar--looks tacky. It's my wife's bike and she doesn't care. But I wouldn't put it on mine. Pay the extra $100 for better quality.
very poor qty
Easy to install, works great. One tiny issue. The light bar sits too close to the bat wing fairing, and inhibits the ability to adjust the lights properly. I added some spacers and longer bolts to move it away from the fairing about half an inch, which cure this problem. Good finish on the lights, and overall I'm happy with them.
I was worried that this piece would look out of place and/or push the light bar out to far. But it did great! You can't even see this piece on the bike, but it's a neccessity for mounting the light bar, and it worked terrific!
works fine just wish it had not been needed, lightbar looked much better in original position
Great addition to my bike Didnt take any time at all to install
Easy to put on and looks great.
Looks great, Love it, Fast delivery and easy installation.
looks great, fit great. This is a high quality light bar. It added the extra night driving light i needed. Thanks JP
Good looking product that is easy to install with any basic tool kit. I had an annoyance that I tried to get rectified by J.P.Cycles but after I emailed photos they asked for it heard nothing after that. I installed this on a non modified 02 VTX 1800R. Instructions were clear as day. Within 24 hours of install on each bulb blew out, then the other about 3 days later. This comes with a low 25 watt bulb that is not enough for the system, the system overloads it fast. I replaced these bulbs with the same model, I purchased the cheap ones from auto zone for about $5 each. So just be prepared to pay an additional $10-$13 for replacement bulbs. Other than the bulb issue and JPC's silence, great purchase.
Really sets off the looks and improves the lighting emmensly.
Quick and easy. The light bat arrived promptly. It was not compatible with the previously installed windshield and the customer service rep was very helpful selecting a replacement windshield. It's my wife's bike and has to be dressed just right. Thanks for the help.
the holes for mounting are a inch too wide center to center the light bar is 7 3/4 a 2009 raider is 6 3/4. The wiring is exposed maybe they could have fished the wire through the hollow bar. What a disappointment
awesome looks. I added visors and it really added a touch of class to my bike
Mounting was easy, instructions were easy to follow and very detailed. But light switch should be moved from light bar to the handle bars. Some modification (drilled holes in bar) to hide wires in light bar to make a clean look, also had to extend wires about 6" to reach headlight basket.