Due to vendor restrictions this product does not qualify for this offer.
This product was proudly made in the USA
Drilled for Wiring: Yes
Manufacturer Part Number: BA-731005-00
Sold in Units: Each
With/Without Dimples: With
To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.
To most closely match the measuring system used on our site, we recommend the following method:
Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.
|Vulcan 1500 Classic FI VN1500N : 2000–2002|
|Vulcan 1500 Classic VN1500D : 1996–1997|
|Vulcan 1500 Classic VN1500E : 1998–2004|
|Vulcan 1500 Classic VN1500N : 2005–2008|
|Vulcan 1500 Mean Streak VN1500P : 2002–2003|
|Vulcan 1600 Classic VN1600A : 2003–2008|
|Vulcan 1600 Mean Streak VN1600B : 2004–2008|
|Vulcan 2000 Classic LT VN2000F : 2006–2007|
|Vulcan 2000 Classic LT VN2000J : 2008–2010|
|Vulcan 2000 Classic VN2000E : 2006–2007|
|Vulcan 2000 Classic VN2000H : 2008–2009|
|Vulcan 2000 LTD VN2000D : 2005–2006|
|Vulcan 2000 VN2000A : 2004–2007|
|Vulcan 2000 VN2000G : 2008–2009|
|Vulcan 800 Classic VN800B : 1999–2005|
|Vulcan 800 Drifter VN800C : 2000|
|Vulcan 800 Drifter VN800E : 2001–2006|
|Vulcan 800 VN800A : 1999–2005|
|Vulcan 900 Classic LT VN900D : 2006–2012|
|Vulcan 900 Classic SE VN900B : 2011–2012|
|Vulcan 900 Classic VN900B : 2006–2010, 2012|
|Vulcan 900 Custom VN900C : 2007–2012|
bars fit perfectly great quality and service was second to none
I bought these for myy husbands vulcan 2000 for his birthday and he was super surprised when he finally got to see them. He says they are super comfortable and he is 5 ft 11 and has plenty of room to stretch out. Definately got my $$ worth!
These look great on the bike, but as I have short arms they tend to move your weight forward and I found uncomfortable. I have now oted for the 11" riser bars.
The Baron Radius drag bars that I ordered for my Kaw 800 came with instructions that said that the bolts from my original bars would fit the new ones. But they did not. The new bars use fine thread. The originals use coarse. Also there were a couple of chrome blemishes that I covered up with aftermarket equipment and the right side control box had to be modified to fit because the is no guide peg hole in the new bars.