★★★★☆
May 25, 2022
These bearings are great and I like the seal. HOWEVER, unless you can make a couple shim washers I would not recommend them. Unless you make a shim for each that makes up for the rubber thickness, you will be setting your bearing preload against the rubber seal. Not a good situation in my opinion. I made a shim for the upper one and reused the tin oem shield. The lower tin shield would not work with the seal so I made a new shield and a shim washer for the lower bearing. Hopefully they redesign the seals to incorporate a steel washer so this isn't an issue.
-jebbesen
