On Sale
Read ( 42 ) Reviews

Cobra Fi2000R Fuel Management System

J&P Cycles Part Number: 400-0064

Manufacturer Part Number: 92-1827

$238.49
$264.99
Save $26.50 (10%)

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Description

Description for Cobra Fi2000R Fuel Management System

• The proven Fi2000 now comes with leads that snap directly into your bike's injector bodies

• You can get a full range of fuel adjustments across all rpm ranges, improving ridability by smoothing out the powerband and giving the bike more throttle response

• The Fi2000R corrects lean air/fuel mixture problems and eliminates backfiring on deceleration

• Features a waterproof circuit board and step-by-step instructions

• No fuel map adjustments or computer downloads required

Product Specs

Product Specs for Cobra Fi2000R Fuel Management System

Manufacturer Part Number:
92-1827
Open or Closed Loop:
Open
Sold in Units:
Each
Warehouse Part Number:
1013694
With/Without 02 Sensor:
Without
Fitment
Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Suzuki Models

  • Boulevard C50 Special Edition VL800C : 2009
  • Boulevard C50 VL800 : 2009
  • Boulevard C50T VL800T : 2009
  • Boulevard M50 VZ800 : 2009
Customer Reviews

Customer Reviews for Cobra Fi2000R Fuel Management System

Overall Rating

5 out of 5 stars (based on 42 reviews)

5 stars (31)

4 stars (10)

3 stars (0)

2 stars (0)

1 star (1)

0 stars (0)

MrOliver

Out the box it took me about 20 minutes to install and back on the road. Installing this made a big difference that is very noticeable.

birdmandave

Installation takes a little more thinking. The original FI clips orientation presented a slight challenge. Once past that insatll was a breeze, Noticed a definite positive difference in overall performance with out of the box settings. great addition for the price.

lmshowalter

So far so good very easy to install>

Mr. Steve

Works as advertised. Very easy install.

Richhs

Even easier to install than stated. Bike runs great now right out of the box.

Doct750

Cobra F-I 2000 with Cobra exhaust system changed my Honda Shadow "big time". more power, precise air-fuel mixture. Approx. 5-7% increase in H.P. Overall Totally satisfied.

Medempsey

Awesome product. Directions were easy to understand. Simple install for anybody who is any type of mechanically inclined. Takes all the guess work out of hooking into the bike. Paired mine with a set of 4” Rinehart true duals on an 03 FLHRI Roadking with a K&N intake. Very happy with this product from Cobra.

djdrdf

So I ordered these and installed them on an 02 Road King. At first I had some difficulty getting the bike tuned. Turned out my front fuel injector was bad. I replaced both injectors and now the bike runs absolutely amazing. Installation and set up is a breeze. I thought I was going to need a youtube video since I am really mechanically challenged. Cobra makes it super simple even i can do it.

j.kuser

If you like tweaking your bike with exhausts, air cleaners etc. Then this is for you. Running around town I want a different baffle than I do on long rides. Sometimes a bro comes by and says hay try this out on your bike. Doesn't matter what it is. You can dial this Cobra in to a T in just minutes. You'll like it especially if you run EFI like I do. No mapping, needing a lap top, none of that. This is a great product.

chrisp1065

Needed to add some fuel over the default setting. Bike runs great. Simple install.

Dave78526

Works Great with Vance and Hines Big Shots!!!

rowlandsimmonds

connected as instructions couple tweeks on adjusters goes as good as bike with stage 1# but was a lot cheaper

Blues Bike

First off, Thanks J&P Cycles Y'all are the greatest! This Fuel Tuner hooked up in no time and is doing its thang! Thanks Cobra for the ingenuity.

blueborne

Works so far

9 Pins

Plug in and play, it delivered the enhanced performance as promised.

Warrior1whitacre

I added an affliction intake system and after studying and checking reviews I went with this unit ..took alittle time to install but works great I believe it's a good investment at a much lower price . And it's just install and go . No mapping required..

twthomas

works great so far

twthomas

easy to install and easy to use.

super dundee

plug n play n more power!!

kwalters

The heat is now gone and it rides so much smoother! EASY INSTAL!

dbkluna

Great product! Easy install, easy setup and easy calibration

hmain84

I received the product just a few days after I had order it. The programmer I ordered is the Fi2000r fuel processor. It does what it said it would do. I didn't have to do any adjustments to it because it came programmed to my bike right out of the box. I do recommend this product to anyone that has aftermarket exhaust and needs a fuel processor system for their bike.

djvanpad686

the FI2000r fuel processor was just what i needed after fitting a barron stealth air kit ,the FI2000r was so easy to install like Cobra say it's just plug an play and performance has been big improvement .and you cant complain about the price best value for money as far as I am concerned,and the customer service from JPs has been great as I am ordering over the net in austrailia.Dave. Perth .Western Australia

exexpat93

Must have for Yamaha Warrior with aftermarket exhaust and/or air intake. Install would have been easy if Yamaha did not try to cram so many hoses, wires, and tubes in such a small area (1970's Audi?). Took about 20 mins even with Yamaha's over and redundant engineering. Rides so much smoother and makes modifications to the bike a non issue. Love it!

mpeachey

Works great, eliminates backfiring and lean stock mixtures. Definitely adds power but some mechanical knowledge recommended or installation and tuning.

mcrob_e4

I had a hard time making it work with my Shadow 750RS. I never got any of the lights to come on after checking all connections several times.

2killjoy

Great product for that price...

rodeorock65

Was bought for my nephew's Vulcan. He likes it alot.

nickfett

Fast easy install, only 15 minutes

scubberly

Works great, does everything it is suposed to

vv

correct

vv

correct

Allosoy

Easy to install. Did it myself in about 20 min.

inot2fast

was then easy install.cure my back fire problem...

vicblaster

The Fi2000 Tri port is super EZ to use, just plug & go. I didn't have to adjust at all.

gunnerfitz

No sweat installation and worked as advertised

athleticcc5

Made a big difference in performance, but did cut down the fuel mileage by about 5 mpg.

Sgt2582

After installing Vance and Hines exhausts. We purchased the F1200R Fuel Processor. It came preloaded for my bike. The installation was relatively easy thank god for Wayne. It was simple plug and play processor. No programming it no downloads great. I have noticed more torque and power. I would recommend this unit to anyone.

athleticcc5

Noticeable performance difference. Increased mpg. My only complaint is when bike is warmed up or stop quick at idle bike wants to die. But definitely recommend this and cobra pipes-sounds good.

det_trenny

Good performance improvement, but had to remove tank to install on Vstar 950.

Kaw_guy

This is definately an asset for my Vulcan 1700 and the installation was a snap!

jmbranch

The product description states no backfiring and improved throttle response. My unit does neither of these. I can tell no difference at all.

Important Product Notes

Not legal for sale or operation in the state of California.ÿCheck with the U.S. EPA and your respective state and local regulations to confirm emission compliance. This item cannot be returned once the package is opened. Manufacturing defects must be addressed through the manufacturer directly.

Shipping Note

Due to state regulations we cannot ship this item to the state of California.

Pickup in our Retail Stores
LIVE HELP

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs