Made in the USA
On Sale
Write a Review

Roland Sands Design 1" Black-OPS 0" Clip-on 41mm Handlebar

J&P Cycles Part Number: 506-060

Manufacturer Part Number: 0208-2041-SMB

$224.96
$249.99
Save $25.03 (10%)

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Important Fitment Note

Fits 41 mm fork tubes.This part has no direct OEM application.

Description

Description for Roland Sands Design 1" Black-OPS 0" Clip-on 41mm Handlebar

• The RSD 1" Clip-Ons mount to the front forks, below the top triple clamp, for a low handlebar position

• They utilize all stock wiring, so there is no cutting or soldering required

• The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings

• Adjustable to any pullback and any height between top and bottom triple clamps with a fixed 5 degree down angle

• Bars feature interchangeable RSD Logo Badges (Black and Brass)

• May need to shorten, cut and/or solder wiring, depending on current bar height

Product Specs

Product Specs for Roland Sands Design 1" Black-OPS 0" Clip-on 41mm Handlebar

Design:
Low Rise Bar
Diameter:
1"
Drilled for Wiring:
No
Finish:
Black
Height:
0"
Manufacturer Part Number:
0208-2041-SMB
Product Color:
Black
Pullback:
0"
Rise:
0"
Sold in Units:
Pair
Style:
Low Rise Bar
Warehouse Part Number:
1012211
With/Without Dimples:
Without
Sizing

Handlebars Measuring Guide

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.


To most closely match the measuring system used on our site, we recommend the following method:

Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.

Diagram of Handlebar Measurements
Diagram of Handlebar Measurements
Width: Measure between the two outside points of the handlebars.
Center Width: Measure between the two inside points of the handlebars.
Rise: Measure from the base of the handlebars to their highest point.
Pullback: Measure from the front of the bars to the furthest point back.

Additional Considerations:

  • Handlebars for Springer Softails are different than bars for other bikes. Learn More
  • We offer bars in two groupings by year of fitment — pre–1982 and later models. The differences are the result of a change of configuration in the switch housings. Learn More
Fitment
Fitment Note:

Fits 41 mm fork tubes.This part has no direct OEM application.

Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Harley-Davidson® Models

  • Dyna Wide Glide CVO FXDWG2 : 2001
  • Dyna Wide Glide EFI FXDWGI : 2005
  • Dyna Wide Glide FXDWG : 1993–2005
  • Softail Blackline FXS : 2011–2013
  • Softail Custom FXSTC : 1984–1999, 2007–2010
  • Softail Night Train EFI FXSTBI : 2001–2006
  • Softail Night Train FXSTB : 1998–2009
  • Softail Standard EFI FXSTI : 2001–2006
  • Softail Standard FXST : 1984–1990, 1999–2015
Customer Reviews

Customer Reviews for Roland Sands Design 1" Black-OPS 0" Clip-on 41mm Handlebar

Not yet rated. Be the first to Write a Review.

Pickup in our Retail Stores
LIVE HELP

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs