Made in the USA
On Sale
Write a Review

Roland Sands Design 1-1/4" Black-OPS 6-1/2" ProStep Handlebar

J&P Cycles Part Number: 633-968

Manufacturer Part Number: 0173-1883-TBP

Save $34.03 (10%)

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Important Fitment Note

Requires use of risers with 1-1/4" clamp area for models not listed.


Description for Roland Sands Design 1-1/4" Black-OPS 6-1/2" ProStep Handlebar

• 1-1/4″ Diameter lower section of handlebar

• 1″ Diameter upper section allows for mounting of stock or aftermarket hand controls

• Slotted and drilled for internal wiring

• 32″ Wide x 6-1/2″ total rise, 4-1/2″ end rise x 6-1/8″ center width, 2-3/4″ pullback

• Requires use of Roland Sands Design's Nostalgia 1-1/4″ risers or other aftermarket 1-1/4″ risers

• Black Ops has all textured black powder coated upper and lower sections with a gloss black billet ring

Product Specs

Product Specs for Roland Sands Design 1-1/4" Black-OPS 6-1/2" ProStep Handlebar

Center Width:
Ape Hanger
Drilled for Wiring:
Manufacturer Part Number:
Product Color:
Sold in Units:
Ape Hanger
Warehouse Part Number:
With/Without Dimples:

Handlebars Measuring Guide

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.

To most closely match the measuring system used on our site, we recommend the following method:

Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.

Diagram of Handlebar Measurements
Diagram of Handlebar Measurements
Width: Measure between the two outside points of the handlebars.
Center Width: Measure between the two inside points of the handlebars.
Rise: Measure from the base of the handlebars to their highest point.
Pullback: Measure from the front of the bars to the furthest point back.

Additional Considerations:

  • Handlebars for Springer Softails are different than bars for other bikes. Learn More
  • We offer bars in two groupings by year of fitment — pre–1982 and later models. The differences are the result of a change of configuration in the switch housings. Learn More
Fitment Note:

Requires use of risers with 1-1/4" clamp area for models not listed.

Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Harley-Davidson® Models

  • Dyna Fat Bob CVO FXDFSE : 2009
  • Dyna Fat Bob CVO FXDFSE2 : 2010
  • Dyna Fat Bob FXDF : 2008–2017
  • Dyna Street Bob FXDBP : 2013–2016
  • Dyna Super Glide CVO FXDSE2 : 2008
  • Dyna Wide Glide EFI FXDWGI : 2006
  • Dyna Wide Glide FXDWG : 2007–2008, 2010–2017
  • Softail Breakout FXSB : 2013–2015
  • Softail Fat Boy Anniversary FLSTF : 2013
  • Softail Fat Boy FLSTF : 2007–2015
  • Softail Fat Boy Lo Anniversary FLSTFB : 2013
  • Softail Fat Boy Lo FLSTFB : 2010–2015
Customer Reviews

Customer Reviews for Roland Sands Design 1-1/4" Black-OPS 6-1/2" ProStep Handlebar

Not yet rated. Be the first to Write a Review.

Pickup in our Retail Stores

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs