Made in the USA
Write a Review

S&S Cycle HP103G Gear Drive Camshaft Set

J&P Cycles Part Number: 990-997

Manufacturer Part Number: 330-0449

$485.99

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Description

Description for S&S Cycle HP103G Gear Drive Camshaft Set

• Comes with camshafts and inner gears, this kit is designed for those who are replacing or upgrading an engine already equipped with S&S Cycle gear drive cams, and will be reusing the existing outer gears

• Installation kit 910-139 is not included but is recommended

• Fuel injection tuning required.

• Pinion shaft run-out must be checked before installing S&S gear drive cams. Gear Drive cams should only be used in engines with pinion shaft runout of no more than .003"

• A hydraulic press and other professional tools are required to install S&S Cycle gear drive cams. Additionally, material must be removed from the inner surface of the stock gearcover.

• The stock crankcase may require clearancing for S&S Cycle .625", .640", and .675" lift cams.

• S&S recommends that gear drive cams be installed by a professional mechanic.

• Due to the inheraent characteristics of gear drives, you may experience more valve train noise with gear driven cams.

• Oversized and undersized gears are available to help achieve correct gear lash.

• S&S Cycle has found that with 160 lb. of valve seat force, theS&S Cycle gear drive cams will perform well up to 6200 rpm. If higher rpm is anticipated, valve springs that provide higher seat force should be used.

• Camshafts that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended.

• To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.

• Quick installation and Easy Start Cams allow stock starter to start any engine.

• Kit contains cams, gearcover gasket, cam bearings, and instructions.

• 1999-2004 stock springs will handle camshafts with lift up to 0.510". If a camshaft with higher lift is installed, high performance valve springs capable of handling a greater lift must be used.

• 2005-up stock valve springs will handle camshafts with lift up to 0.585". If a camshaft with higher lift is installed, high performance valve springs capable of handling a greater lift must be used. Cams with over 0.585" of lift will cause interference between the valve spring top collar and the valve seal with stock cylinder heads.

• Installation of S&S chain drive cams requires special tools. Attempting the cam change operation without these tools will be difficult. Damage can result which will not be covered under warranty.

• For lifts over.510" S&S strongly recommends that the stock chain drive cam be upgraded to the S&S Cycle gear drive or to the H-D part number 25284-08. This kit upgrades the problematic spring loaded chain tensioners to more reliable hydraulic tensioners, and also upgrades the oil pump

• HP103: Designed as bolt in cams for engines with 103 and stock 9.7:1 compression up to 10.5:1. Works well with stock, un-ported heads, but is great for S&S CNC ported heads. Best power in the higher rpm range, 3000-6000 rpm. Bolt-in.

Product Specs

Product Specs for S&S Cycle HP103G Gear Drive Camshaft Set

Centerline Exhaust:
101.5°
Centerline Intake:
102.7°
Duration Exhaust @ .053:
251°
Duration Intake @ .053:
249°
Grind:
HP103G Camshaft
Lift:
.575″
Manufacturer Part Number:
330-0449
Sold in Units:
Kit
Warehouse Part Number:
1281291
Fitment
Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Harley-Davidson® Models

  • Dyna Defender FXDP : 2001–2004
  • Dyna Low Rider Convertible FXDS-CONV : 1999–2000
  • Dyna Low Rider EFI FXDLI : 2004–2005
  • Dyna Low Rider FXDL : 1999–2005
  • Dyna Super Glide Custom EFI FXDCI : 2005
  • Dyna Super Glide Custom FXDC : 2005
  • Dyna Super Glide EFI FXDI : 2004–2005
  • Dyna Super Glide FXD : 1999–2005
  • Dyna Super Glide Sport EFI FXDXI : 2004–2005
  • Dyna Super Glide Sport FXDX : 2000–2005
  • Dyna Super Glide T-Sport FXDXT : 2001–2003
  • Dyna Wide Glide CVO FXDWG2 : 2001
  • Dyna Wide Glide CVO FXDWG3 : 2002
  • Dyna Wide Glide EFI FXDWGI : 2004–2005
  • Dyna Wide Glide FXDWG : 1999–2005
  • Softail Deluxe EFI FLSTNI : 2005–2006
  • Softail Deluxe FLSTN : 2005–2006
  • Softail Deuce CVO FXSTDSE : 2003
  • Softail Deuce CVO FXSTDSE2 : 2004
  • Softail Deuce EFI FXSTDI : 2001–2006
  • Softail Deuce FXSTD : 2000–2006
  • Softail Fat Boy CVO FLSTFSE : 2005
  • Softail Fat Boy CVO FLSTFSE2 : 2006
  • Softail Fat Boy EFI FLSTFI : 2001–2006
  • Softail Fat Boy FLSTF : 2000–2006
  • Softail Heritage Classic EFI FLSTCI : 2001–2006
  • Softail Heritage Classic FLSTC : 2000–2006
  • Softail Heritage EFI FLSTI : 2006
  • Softail Heritage FLST : 2000–2006
  • Softail Heritage Springer Classic EFI FLSTSCI : 2005
  • Softail Heritage Springer Classic FLSTSC : 2005
  • Softail Heritage Springer EFI FLSTSI : 2001–2003
  • Softail Heritage Springer FLSTS : 2000–2003
  • Softail Night Train EFI FXSTBI : 2001–2006
  • Softail Night Train FXSTB : 2000–2006
  • Softail Springer Classic EFI FLSTSCI : 2006
  • Softail Springer Classic FLSTSC : 2006
  • Softail Springer EFI FXSTSI : 2001–2006
  • Softail Springer FXSTS : 2000–2006
  • Softail Standard EFI FXSTI : 2001–2006
  • Softail Standard FXST : 2000–2006
  • Touring Electra Glide Classic CVO FLHTCSE : 2004
  • Touring Electra Glide Classic CVO FLHTCSE2 : 2005
  • Touring Electra Glide Classic EFI FLHTCI : 1999–2006
  • Touring Electra Glide Classic FLHTC : 1999–2006
  • Touring Electra Glide Police EFI FLHTPEI : 2006
  • Touring Electra Glide Police EFI FLHTPI : 2005–2006
  • Touring Electra Glide Police FLHTP : 1999–2001, 2004–2006
  • Touring Electra Glide Police FLHTPI : 2002–2003
  • Touring Electra Glide Standard EFI FLHTI : 2003–2006
  • Touring Electra Glide Standard FLHT : 1999–2006
  • Touring Electra Glide Ultra Classic CVO EFI FLHTCUISE : 2006
  • Touring Electra Glide Ultra Classic EFI FLHTCUI : 1999–2006
  • Touring Electra Glide Ultra Classic FLHTCU : 2005
  • Touring Road Glide EFI CVO FLTRSEI : 2000
  • Touring Road Glide EFI CVO FLTRSEI2 : 2001
  • Touring Road Glide EFI FLTRI : 1999–2006
  • Touring Road Glide FLTR : 1999–2003
  • Touring Road King Classic EFI FLHRCI : 1999–2006
  • Touring Road King Custom EFI FLHRSI : 2004–2006
  • Touring Road King Custom FLHRS : 2004–2006
  • Touring Road King CVO EFI FLHRSEI : 2002
  • Touring Road King CVO EFI FLHRSEI2 : 2003
  • Touring Road King EFI FLHRI : 1999–2006
  • Touring Road King FLHR : 1999–2006
  • Touring Road King Police CA EFI FLHPEI : 2005–2006
  • Touring Road King Police EFI FLHPI : 2005–2006
  • Touring Road King Police FLHP : 1999–2001, 2004
  • Touring Road King Police FLHPI : 2002–2003
  • Touring Street Glide EFI FLHXI : 2006
  • Touring Street Glide FLHX : 2006
Customer Reviews

Customer Reviews for S&S Cycle HP103G Gear Drive Camshaft Set

Not yet rated. Be the first to Write a Review.

Shipping Note

Due to state regulations we cannot ship this item to the state of California.

Pickup in our Retail Stores
LIVE HELP

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs