Feuling Vented Dipstick For Harley Touring

The Feuling dipsticks breather or vent massive crank pressure from the oil tank through a PCV style breather, incorporated of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling Vented Dipsticks effortlessly screws into the factory oil fill spout as a stock replacement item. These breathing dipsticks eliminate unwanted build-up of blow by pressure in the oil tank. Feuling includes two venting options to choose from when installing the vented dipstick.

Features:

Option 1: 1/8 NPT breather vent fitting with porous filter element. This allows for a clean look but can produce an oil misting or residue out of the element on engines with excessive leak down/blow by.

Option 2: Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting or residue through the line and into the filter element. However, this option requires disconnecting the fitting in order to check the oil. This option is preferred as it breaths better than option 1. Feuling recommends routing the line up the frame rail, up under the seat area then back down the right-side frame rail and the filter element can fit properly between the engine and trans area on the inside of the lower right frame rail.

• Polished or black finish
• Dipstick does get hot, Feuling recommends using a glove when checking oil level
• Various options for installation
• Two ways to read the oil level with dipstick, with the bike on a jiffy stand (FHS) or the bike upright and level (FHU)
• Stock replacement part