Made in the USA
Read ( 7 ) Reviews

Paughco 1-3/4″ 38″ Long Staggered Dual Tapered Exhaust System

J&P Cycles Part Number: 442-777

Manufacturer Part Number: 734TM

$389.99

Gold Club Price: $350.99

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Description

Description for Paughco 1-3/4″ 38″ Long Staggered Dual Tapered Exhaust System

• Intended for use on Shovelhead-powered 4-speed FL models with kick or electric start

• They clear the H-D factory highway bars, but the right-side floorboard must be moved with the included Paughco floorboard adapter

• Slider channels and a Paughco hanger bracket are included to ease installation

• Heat shields for the front 441-349 and rear 441-199 pipes are recommended

Product Specs

Product Specs for Paughco 1-3/4″ 38″ Long Staggered Dual Tapered Exhaust System

Exhaust System:
2-into-2
Manufacturer Part Number:
734TM
Sold in Units:
Set
Warehouse Part Number:
1101137
Fitment
Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Harley-Davidson® Models

  • Electra Glide Anniversary FLH : 1978
  • Electra Glide Classic FLHC : 1979–1982
  • Electra Glide Classic FLHTC : 1983
  • Electra Glide Classic Side Car FLHCE : 1979–1981
  • Electra Glide Fat Bob FLHFB : 1970
  • Electra Glide FLB : 1970
  • Electra Glide FLBF : 1970
  • Electra Glide FLH : 1970–1978, 1981–1984
  • Electra Glide FLH-74 : 1980
  • Electra Glide FLH-80 : 1978–1980
  • Electra Glide FLHB : 1970
  • Electra Glide FLHF : 1970–1975
  • Electra Glide Heritage FLH : 1981
  • Electra Glide Police FLHP : 1981
  • Electra Glide Police FLHP-74 : 1979–1980
  • Electra Glide Police FLHP-80 : 1979–1980
  • Electra Glide Police FLP : 1971–1972, 1974–1975
  • Electra Glide Police FLPF : 1971–1972
  • Electra Glide Special Edition FLHX : 1984
  • Electra Glide Sport FLHS : 1977, 1980–1984
  • Electra Glide Standard FLHT : 1983
Customer Reviews

Customer Reviews for Paughco 1-3/4″ 38″ Long Staggered Dual Tapered Exhaust System

Overall Rating

3 out of 5 stars (based on 7 reviews)

5 stars (2)

4 stars (2)

3 stars (1)

2 stars (0)

1 star (2)

0 stars (0)

davo57

Great pipes,perfect fit,a breeze to install.Thanks yet again P&J for keeping Shovelheads alive and well in Australia.

oldmorrie

after 45 min. of run time on these pipes the chrome wrinkled up on an area of about 5 inches. never seen this before on new pipes. i suppose it may fall off after several hours run time. would not suggest these pipes to anyone with this poor chrome plating unless you dont care how they look

dremeseeker

Even though this item was delivered several weeks after order (parts are not always in stock for a nearly 30 year old Harley) the wait was worth it. I was looking for a new exhaust system for my 83 FXRS that was as close to the original as possible. This Paughco system is gorgeous. Chrome is perfect and fit perfect. It was well packed an protected.

Bruce Driscoll

Extremely disappointed in these pipes. Chrome is flaking after only a few days... Installation required removal of excess chrome on exhaust port flanges (would not fit into ports and would not allow fit of standard exhaust gaskets).

hscic

Easy install. Chrome has fine lines with hazing after polishing.

oldsch-64

Good quality. Easy to install and sounded great. They blued pretty quickly, but I guess that is to be expected.

tdanderso

the rear pipe has buff marks in the chrome. I know Paughco to be a great american company. I was torn between going through the motions of returning it or living with it and being able tpo ride my bike. I chose to live with it.

Important Product Notes

Note: Please see U.S. EPA and your respective state and local regulations to confirm noise and emission compliance.

Important Exhaust Notes:

• Note: With any new exhaust, we recommend changes to carburetor jetting or use of an aftermarket fuel injection control module.

• There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.

• Flanges and retaining rings are not included with most aftermarket exhaust for 1984-2013 Evolution and Twin Cam models. Re-use your existing hardware, or purchase replacement hardware.

Shipping Note

Additional oversized shipping charges will be applied for expedited shipments within the contiguous U.S. Shipping charges outside the contiguous U.S. are calculated by weight and dimension during checkout. Due to state regulations we cannot ship this item to the state of California for some motorcycles.

Pickup in our Retail Stores
LIVE HELP

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs