Made in the USA
On Sale
Write a Review

Roland Sands Design 1" Black-OPS 12" Vintage Handlebar

J&P Cycles Part Number: 506-067

Manufacturer Part Number: 0173-1839-TBP

Save $32.03 (10%)

Checking availability...

– Order in the next to ship today
  • Free Ground Shipping
Important Fitment Note

Not for use on 2008-11 FLSTSB with OEM risers.


Description for Roland Sands Design 1" Black-OPS 12" Vintage Handlebar

• Original gusseted ape and its flowing radius tubes and riding position are unmatched in style, design and quality

• The stance will give you the aggressive yet comfortable riding position you are looking for

• End caps make it extremely easy to run internal wiring

• If quality and originality are important to you, then look no further

• 1" diameter to accept stock or aftermarket hand controls

• 30" Wide

• 12" Rise

• 6-1/2" Center Width

• 4" Pullback

• Slotted and drilled for internal wiring

• Knurling for risers at 4-3/4" on-center

• Stylish multi-hole drilled corner gusset offers strength and rigidity

• Black Ops, Roland Sands Design's newest finish option for handlebars has a textured black handlebar with gloss black end caps

Product Specs

Product Specs for Roland Sands Design 1" Black-OPS 12" Vintage Handlebar

Center Width:
Springer Bar
Drilled for Wiring:
Manufacturer Part Number:
Product Color:
Sold in Units:
Springer Bar
Warehouse Part Number:
With/Without Dimples:

Handlebars Measuring Guide

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.

To most closely match the measuring system used on our site, we recommend the following method:

Push a table against a wall. Prop up the handlebars in the corner where the table meets the wall, then rotate the bars forward until the front of the bars touch the wall. In this case, rise is the distance from the table to the highest point on the bars, with pullback measured from the wall to the farthest point back.

Diagram of Handlebar Measurements
Diagram of Handlebar Measurements
Width: Measure between the two outside points of the handlebars.
Center Width: Measure between the two inside points of the handlebars.
Rise: Measure from the base of the handlebars to their highest point.
Pullback: Measure from the front of the bars to the furthest point back.

Additional Considerations:

  • Handlebars for Springer Softails are different than bars for other bikes. Learn More
  • We offer bars in two groupings by year of fitment — pre–1982 and later models. The differences are the result of a change of configuration in the switch housings. Learn More
Fitment Note:

Not for use on 2008-11 FLSTSB with OEM risers.

Fitment Questions?

With over 750 years of experience combined, our tech staff has the answers!

Compatible Models

Harley-Davidson® Models

  • Softail Bad Boy FXSTSB : 1995–1997
  • Softail Cross Bones FLSTSB : 2008–2011
  • Softail Heritage Springer Classic EFI FLSTSCI : 2005
  • Softail Heritage Springer Classic FLSTSC : 2005
  • Softail Heritage Springer EFI FLSTSI : 2001–2003
  • Softail Heritage Springer FLSTS : 1997–2003
  • Softail Springer Classic EFI FLSTSCI : 2006
  • Softail Springer Classic FLSTSC : 2006–2007
  • Softail Springer CVO FXSTSSE2 : 2008
  • Softail Springer CVO FXSTSSE3 : 2009
  • Softail Springer EFI FXSTSI : 2001–2006
  • Softail Springer FXSTS : 1988–2006
Customer Reviews

Customer Reviews for Roland Sands Design 1" Black-OPS 12" Vintage Handlebar

Not yet rated. Be the first to Write a Review.

Shipping Note

Due to safety regulations, this item can only be shipped via UPS Ground within the contiguous U.S. It cannot be shipped using any of our Worldwide shipping options.

Pickup in our Retail Stores

Get Help From Our Industry Experts

  • Monday-Friday: 7 a.m. - 9 p.m. CST
  • Saturday-Sunday: 8 a.m. - 6 p.m. CST
  • Thanksgiving: Closed
  • Christmas Eve: 7a-5p CST
  • Christmas: Closed
  • Help / FAQs