Griot's Garage G15 Long Throw Orbital 5" Polisher

Griot's Garage G15 Long Throw Orbital 5" Polisher

Designed from the ground-up with paint professionals in mind, the Griot's Garage Long Throw G15 Polisher has the power, pad rotation and control to take your paint correction to a higher level. The G15 combines Griot's "big block" 1,100-watt motor with a 5" backing plate and orbital throw drive. The non-circular, eccentric pattern sports a whopping 15mm throw.

Compared to the smaller Griot's Garage G9 Polisher, the G15 features the same ergonomic elements with a 20% bigger housing, 22% more power and maxes out at 5,300 orbits per minute. The proprietary fan-integrated backing plate and billet counter balancer are exclusive to the G15 and G21 polishers and are designed to reduce vibration - especially while running heavier microfiber buffing pads (versus foam). Put simply, Griot's G15 and G21 Long Throw Polishers are best in class and engineered to exceed the highest professional expectations. 

Note: It should be noted that long-throw polishers are not ideally suited for application of waxes and sealants. The extended throw tends to cure the wax unevenly (with the exception of Griot's BOSS Finishing Sealant - which is designed to comply with the heat cycling of long-throw orbits). The G8 or G9 Polare most suitable for wax application.

Features: 

• Powerful 1,100-watt, 10-amp "big block" motor
• Designed for efficient paint correction 
• 15mm orbit throw
• Fan-cooled counter-balance (patent pending)
• Premium bearing construction
• Fitted with 5" fanned orbital backing plate
• Variable speed: 3000-5300 RPM 
• 10-foot quick-connect 16 AWG SJO rubber power cord
• 6 speed settings
• Speed dial accessible for right- and left-hand users
• Constant speed control
• Double-shot rubber platypus head-grip and grip pads
• Shroud grip contoured to accommodate four fingers
• Rest pads for tool to lay stable on its back
• Quick access brush side ports
• Convertible to a 6" pad system with optional 6" BOSS Fanned Orbital Backing Plate (sold separately) 

Includes: 

• Polisher
• 5" fanned backing plate
• 5mm hex backing plate wrench
• Replacement high-carbon brushes